TSV914

AKTIV

Vierfach-RRIO-Operationsverstärker, 5,5 V, 8 MHz

Jetzt bestellen

Datenblatt

document-pdfAcrobat TSV91x Rail-to-Rail Input/Output, 8-MHz Operational Amplifiers datasheet (Rev. D) (Englisch) PDF | HTML

TSV914

AKTIV

Jetzt bestellen

Produktdetails

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Rail-to-rail

In, Out

GBW (typ) (MHz)

8

Slew rate (typ) (V/µs)

6.5

Vos (offset voltage at 25°C) (max) (mV)

1.5

Iq per channel (typ) (mA)

0.6

Vn at 1 kHz (typ) (nV√Hz)

18

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

0.53

Features

EMI Hardened

CMRR (typ) (dB)

103

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.015

Output swing headroom (to positive supply) (typ) (V)

-0.015

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Rail-to-rail

In, Out

GBW (typ) (MHz)

8

Slew rate (typ) (V/µs)

6.5

Vos (offset voltage at 25°C) (max) (mV)

1.5

Iq per channel (typ) (mA)

0.6

Vn at 1 kHz (typ) (nV√Hz)

18

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

0.53

Features

EMI Hardened

CMRR (typ) (dB)

103

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.015

Output swing headroom (to positive supply) (typ) (V)

-0.015

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

Rail-to-rail input and output
Low noise: 18 nV/√Hz at 1 kHz
Low power consumption: 550 µA (typical)
High-gain bandwidth: 8 MHz
Operating supply voltage from 2.5 V to 5.5 V
Low input bias current: 1 pA (typical)
Low input offset voltage: 1.5 mV (maximum)
Low offset voltage drift: ±0.5 µV/°C (typical)
ESD internal protection: ±4-kV human-body model (HBM)
Extended temperature range: –40°C to 125°C

Rail-to-rail input and output
Low noise: 18 nV/√Hz at 1 kHz
Low power consumption: 550 µA (typical)
High-gain bandwidth: 8 MHz
Operating supply voltage from 2.5 V to 5.5 V
Low input bias current: 1 pA (typical)
Low input offset voltage: 1.5 mV (maximum)
Low offset voltage drift: ±0.5 µV/°C (typical)
ESD internal protection: ±4-kV human-body model (HBM)
Extended temperature range: –40°C to 125°C

The TSV91x family, which includes single-, dual-, and quad-channel operational amplifiers (op amps), is specifically designed for general-purpose applications. Featuring rail-to-rail input and output (RRIO) swings, wide bandwidth (8 MHz), and low offset voltage (0.3 mV, typical), this family is designed for a variety of applications that require a good balance between speed and power consumption. The op amps are unity-gain stable and feature an ultra-low input bias current, which enables the family to be used in applications with high-source impedances. The low input bias current allows the devices to be used for sensor interfaces, battery-supplied and portable applications, and active filtering.

The robust design of the TSV91x provides ease-of-use to the circuit designer. Features include a unity-gain stable, integrated RFI-EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBV).

The TSV91x family, which includes single-, dual-, and quad-channel operational amplifiers (op amps), is specifically designed for general-purpose applications. Featuring rail-to-rail input and output (RRIO) swings, wide bandwidth (8 MHz), and low offset voltage (0.3 mV, typical), this family is designed for a variety of applications that require a good balance between speed and power consumption. The op amps are unity-gain stable and feature an ultra-low input bias current, which enables the family to be used in applications with high-source impedances. The low input bias current allows the devices to be used for sensor interfaces, battery-supplied and portable applications, and active filtering.

The robust design of the TSV91x provides ease-of-use to the circuit designer. Features include a unity-gain stable, integrated RFI-EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBV).

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen		Datum
*	Datenblatt	TSV91x Rail-to-Rail Input/Output, 8-MHz Operational Amplifiers datasheet (Rev. D)	PDF \| HTML		01.10.2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Simulationsmodell