Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)

TPS7H4010-SEP

AKTIV

6-A-Synchroner Abwärtswandler, strahlungstolerant, 3,5 bis 32 V, in einem Kunstoffgehäuse

Produktdetails

Rating Space Topology Buck Iout (max) (A) 6 Vin (max) (V) 32 Vin (min) (V) 3.5 Vout (max) (V) 30.4 Vout (min) (V) 1 Features Enable, Forced PWM, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, Synchronous rectification, Tracking, UVLO Fixed Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Operating temperature range (°C) -55 to 125 Iq (typ) (µA) 15 Duty cycle (max) (%) 95 Type Converter
Rating Space Topology Buck Iout (max) (A) 6 Vin (max) (V) 32 Vin (min) (V) 3.5 Vout (max) (V) 30.4 Vout (min) (V) 1 Features Enable, Forced PWM, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, Synchronous rectification, Tracking, UVLO Fixed Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Operating temperature range (°C) -55 to 125 Iq (typ) (µA) 15 Duty cycle (max) (%) 95 Type Converter
DIESALE (KGD) See data sheet WQFN (RNP) 30 24 mm² 6 x 4
  • Radiation Hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Synchronizable to external clock
  • Internal compensation
  • Power-good flag
  • Precision enable to program system UVLO
  • Fixed or adjustable soft-start time
  • Cycle-by-cycle current limiting
  • Short-circuit protection with hiccup mode
  • Thermal shutdown protection
  • Radiation Hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Synchronizable to external clock
  • Internal compensation
  • Power-good flag
  • Precision enable to program system UVLO
  • Fixed or adjustable soft-start time
  • Cycle-by-cycle current limiting
  • Short-circuit protection with hiccup mode
  • Thermal shutdown protection

The TPS7H4010-SEP is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 6 A of load current from a supply voltage ranging from 3.5 V to 32 V. The TPS7H4010-SEP provides exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, FPWM option, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The device requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limiting, and hiccup short-circuit protection.

The TPS7H4010-SEP is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 6 A of load current from a supply voltage ranging from 3.5 V to 32 V. The TPS7H4010-SEP provides exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, FPWM option, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The device requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limiting, and hiccup short-circuit protection.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
NEU TPS7H4012-SEP AKTIV Strahlungstoleranter synchroner 6-A-Abwärtswandler, 4,5 V bis 14 V Eingangsspannung Improved radiation performance with a reduced input voltage range and the same current output
NEU TPS7H4102-SEP AKTIV Radiation-tolerant, 3V-to-7V input, 3A per channel dual synchronous step-down converter A 3A dual channel device capable of paralleling channels up to 6A but a reduced input voltage range

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 15
Typ Titel Datum
* Data sheet TPS7H4010-SEP Radiation Hardened 3.5-V to 32-V, 6-A Synchronous Step-Down Voltage Converter in Space Enhanced Plastic datasheet (Rev. A) PDF | HTML 02 Dez 2021
* VID TPS7H4010-SEP VID V62/19623 18 Feb 2025
* Radiation & reliability report Single-Event Effects Test Report of the TPS7H4010-SEP (Rev. B) PDF | HTML 18 Dez 2024
* Radiation & reliability report TPS7H4010-SEP Total Ionizing Dose (TID) Radiation Report (Rev. A) 11 Jun 2024
* Radiation & reliability report TPS7H4010-SEP Production Flow and Reliability Report (Rev. A) PDF | HTML 29 Jul 2022
* Radiation & reliability report TPS7H4010-SEP Neutron Displacement Damage Characterization 30 Nov 2020
Selection guide TI Space Products (Rev. K) 04 Apr 2025
Technical article How Space Enhanced Products Address Challenges in low Earth orbit Applications (Rev. A) PDF | HTML 18 Dez 2023
Application note Using Space Grade Power Components to Power AMD Kintex XQRKU060 FPGA PDF | HTML 08 Nov 2023
Application note Using Space Grade Power Components to Power Microchip RTAX-S/SL FPGA PDF | HTML 29 Sep 2023
Application note Using Space Grade Power Components to Power Microchip RT PolarFire FPGA PDF | HTML 20 Sep 2023
Application note Radiation Tolerant Inverting Buck-Boost Converter with TPS7H4010-SEP PDF | HTML 16 Jun 2023
Application note Space Grade Power Solution for Microsemi RTG4 PDF | HTML 02 Mai 2023
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 15 Sep 2022
E-book Radiation Handbook for Electronics (Rev. A) 21 Mai 2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS7H4010EVM — TPS7H4010-SEP strahlungsgehärteter 6-A-Abwärtswandler für 3,5 V bis 32 V – Evaluierungsmodul

Das TPS7H4010-Evaluierungsmodul (EVM) demonstriert, wie der TPS7H4010-SEP-Abwärtswandler eine geregelte Stromschiene mit Laststrom bis zu 6 A bereitstellen und typische Satelliten-Stromversorgungsanwendungen unterstützen kann.

Benutzerhandbuch: PDF
Evaluierungsplatine

ALPHA-3P-ADM-VA601-SPACE-AMD — Alpha Data ADM-VA601 Kit mit AMD Versal Core XQRVC1902 ACAP und strahlungstoleranten Produkten Von T

Dies ist ein 6U-VPX-Formfaktor, der den AMD-Xilinx® Versal AI Core XQRVC1902 anpassbaren SoC/FPGA hervorhebt. Das ADM-VA600 ist modular aufgebaut. Es Verfügt über einen FMC+-Anschluss, DDR4-DRAM und Systemüberwachung. Bei den meisten Komponenten handelt es sich um strahlungstolerante (...)

Evaluierungsplatine

ALPHA-3P-VB630-SPACE-AMD — Alpha Data ADM-VB630 Kit mit AMD Versal Edge XQRVE2302 ACAP und strahlungstoleranten Produkten von T

Dies ist ein 3U-VPX-Formfaktor, der den AMD-Xilinx® Versal AI Edge XQRVE2302 anpassbaren SoC/FPGA hervorhebt. ADM-VB630 ist eine Single-Board-Computerplatine. Bei den meisten Komponenten handelt es sich um strahlungstolerante Stromversorgungs-, Schnittstellen- und Sensorikkomponenten (-SEP).

Simulationsmodell

TPS7H4010-SEP PSpice Model (Rev. B)

SNVMC40B.ZIP (22 KB) - PSpice Model
Simulationsmodell

TPS7H4010-SEP PSpice Transient Model (Rev. A)

SNVMC54A.ZIP (38 KB) - PSpice Model
Simulationsmodell

TPS7H4010-SEP TINA-TI SPICE Model (Rev. A)

SNVMC39A.TSC (18 KB) - TINA-TI Spice Model
Simulationsmodell

TPS7H4010-SEP TINA-TI Transient SPICE Model

SNVMC53.TSC (56 KB) - TINA-TI Spice Model
Referenzdesigns

TIDA-050088 — Strahlungstolerantes Stromversorgungs-Referenzdesign für Versal AI Edge

Dies ist ein Referenzdesign für eine strahlungstolerante Leistungsarchitektur für den Versal™ AI Edge XQRVE2302 von AMD. Versal Edge ist ein anpassungsfähiges System-on-Chip (SoC) für Raumfahrtanwendungen, das hohe Leistung in einem kleinen Formfaktor ermöglicht. Eine robuste Stromversorgung ist (...)
Design guide: PDF
Referenzdesigns

TIDA-010260 — Referenzdesign für integrierten 4T5R-Transceiver, raumfahrttauglich

Das Referenzdesign für einen integrierten raumfahrttauglichen 4T5R-Transceiver umfasst einen vollständigen HF-Sampling-Transceiver einschließlich einer Taktlösung und einer Stromversorgungslösung. Das Design umfasst alle SEP-qualifizierten Bausteine von TI und alle raumfahrttauglichen passiven (...)
Design guide: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DIESALE (KGD)
WQFN (RNP) 30 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos