Home Energiemanagement Mehrkanal-ICs (PMICs)
Home
Energiemanagement
Mehrkanal-ICs (PMICs)

TPS65216

AKTIV

Integriertes Power-Management (PMIC) für ARM® Cortex™-A8/A9 SOCs und FPGAs

Jetzt bestellen
Datenblatt

TPS65216

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Processor supplier Texas Instruments Processor name Sitara AM335x, Sitara AM43x, Sitara AMIC110, Sitara AMIC120 Product type Processor and FPGA Regulated outputs (#) 5 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (min) (V) -0.3 Vout (max) (V) 7 Iout (max) (A) 1.8 Configurability Factory programmable, Software configurable Features Dynamic voltage scaling, Eco-mode, I2C control, Overcurrent protection, Power good, Power sequencing, Power supply and system monitoring, Thermal shutdown, UVLO adjustable Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.22 Switching frequency (max) (kHz) 2400 Shutdown current (ISD) (typ) (µA) 5 Switching frequency (typ) (kHz) 2400
Processor supplier Texas Instruments Processor name Sitara AM335x, Sitara AM43x, Sitara AMIC110, Sitara AMIC120 Product type Processor and FPGA Regulated outputs (#) 5 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 1 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (min) (V) -0.3 Vout (max) (V) 7 Iout (max) (A) 1.8 Configurability Factory programmable, Software configurable Features Dynamic voltage scaling, Eco-mode, I2C control, Overcurrent protection, Power good, Power sequencing, Power supply and system monitoring, Thermal shutdown, UVLO adjustable Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.22 Switching frequency (max) (kHz) 2400 Shutdown current (ISD) (typ) (µA) 5 Switching frequency (typ) (kHz) 2400
VQFN (RSL) 48 36 mm² (6 mm × 6 mm)
  • Three adjustable step-down converters with integrated switching FETs (DCDC1, DCDC2, and DCDC3):
    • DCDC1: 1.1V default, up to 1.8A
    • DCDC2: 1.1V default, up to 1.8A
    • DCDC3: 1.1V default, up to 1.8A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range 0.85V to 1.675V (DCDC1 and DCDC2)
    • Adjustable output voltage range 0.9V to 3.4V (DCDC3)
    • Power save mode at light load current
    • 100% duty cycle for lowest dropout
    • Active output-discharge when disabled
  • One adjustable buck-boost converter with integrated switching FETs (DCDC4):
    • DCDC4: 3.3V default, up to 1.6A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range from 1.175V to 3.4V
    • Active output-discharge when disabled
  • Adjustable general-purpose LDO (LDO1)
    • LDO1: default up to 400mA
    • VIN range from 1.8V to 5.5V
    • Adjustable output voltage range from 0.9V to 3.4V
    • Active output-discharge when disabled
  • High-voltage load switch (LS) With 100mA or 500mA selectable current limit
    • VIN range from 1.8V to 10V
    • 500mΩ (max) switch impedance
  • Supervisor with built-in supervisor function monitors
    • DCDC1, DCDC2 ±4% tolerance
    • DCDC3, DCDC4 ±5% tolerance
    • LDO1 ±5% tolerance
  • Protection, diagnostics, and control:
    • Undervoltage lockout (UVLO)
    • Always-on push-button monitor
    • Overtemperature warning and shutdown
    • I2C interface (address 0x24) (see Timing Requirements for I2C operation at 400kHz)
  • Three adjustable step-down converters with integrated switching FETs (DCDC1, DCDC2, and DCDC3):
    • DCDC1: 1.1V default, up to 1.8A
    • DCDC2: 1.1V default, up to 1.8A
    • DCDC3: 1.1V default, up to 1.8A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range 0.85V to 1.675V (DCDC1 and DCDC2)
    • Adjustable output voltage range 0.9V to 3.4V (DCDC3)
    • Power save mode at light load current
    • 100% duty cycle for lowest dropout
    • Active output-discharge when disabled
  • One adjustable buck-boost converter with integrated switching FETs (DCDC4):
    • DCDC4: 3.3V default, up to 1.6A
    • VIN range from 2.7V to 5.5V
    • Adjustable output voltage range from 1.175V to 3.4V
    • Active output-discharge when disabled
  • Adjustable general-purpose LDO (LDO1)
    • LDO1: default up to 400mA
    • VIN range from 1.8V to 5.5V
    • Adjustable output voltage range from 0.9V to 3.4V
    • Active output-discharge when disabled
  • High-voltage load switch (LS) With 100mA or 500mA selectable current limit
    • VIN range from 1.8V to 10V
    • 500mΩ (max) switch impedance
  • Supervisor with built-in supervisor function monitors
    • DCDC1, DCDC2 ±4% tolerance
    • DCDC3, DCDC4 ±5% tolerance
    • LDO1 ±5% tolerance
  • Protection, diagnostics, and control:
    • Undervoltage lockout (UVLO)
    • Always-on push-button monitor
    • Overtemperature warning and shutdown
    • I2C interface (address 0x24) (see Timing Requirements for I2C operation at 400kHz)

The TPS65216 is a single chip, power-management IC (PMIC) specifically designed to support the AMIC110, AMIC120, AM335x, and AM437x line of processors in line-powered (5V) applications. The device is characterized across a –40°C to +105°C temperature range, making it suitable for various industrial applications.

The TPS65216 is specifically designed to provide power management for all the functionalities of the AMIC110, AMIC120, AM335x, and AM437x. The DC/DC converters DCDC1 through DCDC4 are intended to power the core, MPU, DDR memory, and 3.3V analog and I/O, respectively. LDO1 provides the 1.8V analog and I/O for the processor. GPIO2 allows for warm reset of the DCDC1 and DCDC2 converters. The I2C interface allows the user to enable and disable all voltage regulators, the load switch, and GPIOs. Additionally, UVLO and supervisor voltage thresholds, power-up sequence, and power-down sequence can be programmed through I2C. Interrupts for overtemperature, overcurrent, and undervoltage can be monitored as well. The supervisor monitors DCDC1 through DCDC4 and LDO1. The supervisor has two settings, one for typical undervoltage tolerance (STRICT = 0b), and one for tight undervoltage and overvoltage tolerances (STRICT = 1b). A power-good signal indicates proper regulation of the five voltage regulators.

The TPS65216 device is available in a 48-pin VQFN package (6mm × 6mm, 0.4mm pitch).

The TPS65216 is a single chip, power-management IC (PMIC) specifically designed to support the AMIC110, AMIC120, AM335x, and AM437x line of processors in line-powered (5V) applications. The device is characterized across a –40°C to +105°C temperature range, making it suitable for various industrial applications.

The TPS65216 is specifically designed to provide power management for all the functionalities of the AMIC110, AMIC120, AM335x, and AM437x. The DC/DC converters DCDC1 through DCDC4 are intended to power the core, MPU, DDR memory, and 3.3V analog and I/O, respectively. LDO1 provides the 1.8V analog and I/O for the processor. GPIO2 allows for warm reset of the DCDC1 and DCDC2 converters. The I2C interface allows the user to enable and disable all voltage regulators, the load switch, and GPIOs. Additionally, UVLO and supervisor voltage thresholds, power-up sequence, and power-down sequence can be programmed through I2C. Interrupts for overtemperature, overcurrent, and undervoltage can be monitored as well. The supervisor monitors DCDC1 through DCDC4 and LDO1. The supervisor has two settings, one for typical undervoltage tolerance (STRICT = 0b), and one for tight undervoltage and overvoltage tolerances (STRICT = 1b). A power-good signal indicates proper regulation of the five voltage regulators.

The TPS65216 device is available in a 48-pin VQFN package (6mm × 6mm, 0.4mm pitch).
filter Andere Mehrkanal-ICs (PMICs) suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung.
TPS65218D0 AKTIV Integriertes Power-Management (PMIC) für ARM® Cortex™-A8/A9 SOCs und FPGAs Drop in replacement with higher functionality
Ähnliche Funktionalität wie der verglichene Baustein.
TPS65219 AKTIV Integriertes Power Management (PMIC) für Arm® Cortex®- A53 Prozessoren und FPGAs TPS65219 has higher current capability, more LDOs, supports lower output voltages, has no Buck-Boost and a smaller package size

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS65216 Power Management IC (PMIC) With 4 DC/DC Converters, 1 LDO, and Integrated Power Sequencing datasheet (Rev. C) PDF | HTML 12.06.2026
Anwendungshinweis AM335x PMIC Selection Guide (Rev. A) 19.09.2019
Benutzerhandbuch Powering AMIC110, AMIC120, AM335x, and AM437x with TPS65216 PDF | HTML 11.04.2019

Design und Entwicklung

Lösungen für die Stromversorgung

Lösungen erkunden, die den TPS65216 umfassen. TI bietet Stromversorgungslösungen für Ein-Chip-Systeme (SoCs), Prozessoren, Mikrocontroller, Sensoren und feldprogrammierbare Gate-Arrays (FPGAs) von TI und von Fremdherstellern an.

Lösungen anzeigen
Evaluierungsplatine

TPS65218EVM-100 — TPS65218-Evaluierungsmodul

The TPS65218EVM is a fully assembled platform for evaluating the performance of the TPS65218 power management device.

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

TPS65218xx PSpice Transient Model

SLDM022.ZIP (1460 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-010011 — Referenzdesign für hocheffiziente Stromversorgungsarchitektur für Schutzrelais-Prozessormodul

Dieses Referenzdesign zeigt verschiedene Stromversorgungsarchitekturen zur Erzeugung von mehreren Spannungsschienen für ein Anwendungsprozessormodul, das einen Laststrom > 1 A und einen hohen Wirkungsgrad benötigt. Die erforderliche Stromversorgung wird über einen 5-, 12- oder 24-V-DC-Eingang von (...)
Unterstützte Produkte und Hardware
Referenzdesign

TIPA-050052 — AMIC110, AMIC120, AM335x und AM437x Stromversorgungsdesign mit dem TPS65216 PMIC

Dieses Stromversorgungsdesign beschreibt den optimierten Power Management IC (PMIC) für die Stromversorgung der AMIC110-, AMIC120-, AM335x- und AM437x-. Der TPS65216 ist ein Einzel-Chip-Power-IC (PMIC), der speziell zur Unterstützung der AMIC110-, AMIC120-, AM335x- und AM437x-Prozessoren in (...)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RSL) 48 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos