TPS55289

AKTIV

8-A-Abwärts-/Aufwärtswandler mit I²C-Schnittstelle, 30 V

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS55289 30-V, 8-A Buck-Boost Converter with I2C Interface datasheet (Rev. A) (Englisch) PDF | HTML

TPS55289

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Topology

Buck-Boost

Vin (max) (V)

30

Vin (min) (V)

3

Vout (max) (V)

22

Vout (min) (V)

0.8

Switch current limit (typ) (A)

8

Features

Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, I2C interface, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable

EMI features

Frequency Dithering, Spread Spectrum

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00076

Duty cycle (max) (%)

100

Sector

Test & measurement

Rating

Catalog

Topology

Buck-Boost

Vin (max) (V)

30

Vin (min) (V)

3

Vout (max) (V)

22

Vout (min) (V)

0.8

Switch current limit (typ) (A)

8

Features

Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, I2C interface, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable

EMI features

Frequency Dithering, Spread Spectrum

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00076

Duty cycle (max) (%)

100

Sector

Test & measurement

VQFN-HR (RYQ)

21

15 mm² (5 mm × 3 mm)

Programmable power supply (PPS) support for USB power delivery (USB PD)
- 3.0-V to 30-V wide input voltage range
- 0.8-V to 22-V with 10-mV step programmable output voltage range
- ±1% reference voltage accuracy
- Adjustable output voltage compensation for voltage droop over the cable
- Programmable output current limit up to 6.35 A with 50-mA step
- ±5% accurate output current monitoring
- I²C interface
High efficiency over entire load range
- 96% efficiency at V_IN = 12 V, V_OUT = 20 V, and I_OUT = 3 A
- Programmable PFM and FPWM mode at light load
Avoid frequency interference and crosstalk
- Optional clock synchronization
- Programmable switching frequency from 200 kHz to 2.2 MHz
EMI mitigation
- Optional programmable spread spectrum
- Lead-less package
Rich protection features
- Output overvoltage protection
- Hiccup mode for output short-circuit protection
- Thermal shutdown protection
- 8-A average inductor current limit
Small solution size
- Maximum switching frequency up to 2.2 MHz
- 3.0-mm × 5.0-mm HotRod™ QFN package

Programmable power supply (PPS) support for USB power delivery (USB PD)
- 3.0-V to 30-V wide input voltage range
- 0.8-V to 22-V with 10-mV step programmable output voltage range
- ±1% reference voltage accuracy
- Adjustable output voltage compensation for voltage droop over the cable
- Programmable output current limit up to 6.35 A with 50-mA step
- ±5% accurate output current monitoring
- I²C interface
High efficiency over entire load range
- 96% efficiency at V_IN = 12 V, V_OUT = 20 V, and I_OUT = 3 A
- Programmable PFM and FPWM mode at light load
Avoid frequency interference and crosstalk
- Optional clock synchronization
- Programmable switching frequency from 200 kHz to 2.2 MHz
EMI mitigation
- Optional programmable spread spectrum
- Lead-less package
Rich protection features
- Output overvoltage protection
- Hiccup mode for output short-circuit protection
- Thermal shutdown protection
- 8-A average inductor current limit
Small solution size
- Maximum switching frequency up to 2.2 MHz
- 3.0-mm × 5.0-mm HotRod™ QFN package

The TPS55289 is a synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS55289 integrates four MOSFET switches, providing a compact solution for USB power delivery (USB PD) application.

The TPS55289 has up to 30-V input voltage capability. Through the I²C interface, the output voltage of the TPS55289 can be programmed from 0.8 V to 22 V with 10-mV step. When working in boost mode, the device can deliver 60 W from 12-V input voltage. It is capable of delivering 45 W from 9-V input voltage.

The TPS55289 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS55289 also provides optional spread spectrum to minimize peak EMI.

The TPS55289 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS55289 also makes sure it safely operates with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55289 can use a small inductor and small capacitors with high switching frequency. It is available in a 3.0-mm × 5.0-mm QFN package.

The TPS55289 is a synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS55289 integrates four MOSFET switches, providing a compact solution for USB power delivery (USB PD) application.

The TPS55289 has up to 30-V input voltage capability. Through the I²C interface, the output voltage of the TPS55289 can be programmed from 0.8 V to 22 V with 10-mV step. When working in boost mode, the device can deliver 60 W from 12-V input voltage. It is capable of delivering 45 W from 9-V input voltage.

The TPS55289 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS55289 also provides optional spread spectrum to minimize peak EMI.

The TPS55289 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS55289 also makes sure it safely operates with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55289 can use a small inductor and small capacitors with high switching frequency. It is available in a 3.0-mm × 5.0-mm QFN package.

filter

Andere DC/DC-Wandler suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 3

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	TPS55289 30-V, 8-A Buck-Boost Converter with I2C Interface datasheet (Rev. A)	PDF \| HTML	31.08.2022
	Anwendungshinweis	E-Latch with 5S SuperCaps Solution Used Buck-Boost Converter	PDF \| HTML	02.06.2026
	Zertifikat	TPS55289EVM EU RoHS Declaration of Conformity (DoC)		15.03.2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS55289EVM — TPS55289 Evaluierungsmodul für 36 V, 8 A/4 A, vollständig integrierter I²C-Abwärts-/Aufwärtswandler

Der TPS55289 ist ein synchroner Abwärts-/Aufwärtswandler, der für die Umwandlung von Batteriespannung oder Adapterspannung von Stromversorgungsschienen optimiert ist. Der TPS55289 integriert vier MOSFET-Schalter und stellt eine kompakte Lösung für USB-Stromversorgungs- (USB PD-) Anwendungen bereit.

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Vorrätig

Limit:

Zum Bestellen bitte anmelden

lock

Melden Sie sich an, um den Lagerbestand einzusehen

??asset.out-of-stock-ti_de_DE??

Nicht verfügbar

Simulationsmodell