Home Energiemanagement DC/DC-Schaltregler DC/DC-Wandler

TPS54678

AKTIV

Synchroner Abwärtswandler SWIFT™, 2,95 bis 6 V Eingang, 6A, mit Hiccup-Strombegrenzung

Eine neuere Version dieses Produkts ist verfügbar

Ähnliche Funktionalität wie der verglichene Baustein.
TPS62869 AKTIV Synchroner Abwärtswandler, 5,5 V, 6 A, mit I²C-Schnittstelle in einem 1,5 mm × 2,5 mm QFN-Gehäuse Newer generation of 6-A devices
TPS62867 AKTIV Synchroner Abwärtswandler, 2,4 bis 5,5 V Eingangsspannung, 6 A, im QFN-Gehäuse (1,5 × 2,5 mm) Newer generation of 6-A devices with <30mm² total BOM size.

Produktdetails

Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 6 Vin (min) (V) 2.95 Vout (max) (V) 4.5 Vout (min) (V) 0.6 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00057 Duty cycle (max) (%) 98
Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 6 Vin (min) (V) 2.95 Vout (max) (V) 4.5 Vout (min) (V) 0.6 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00057 Duty cycle (max) (%) 98
WQFN (RTE) 16 9 mm² (3 mm × 3 mm)
  • Two 12-mΩ (typical) MOSFETs for high-efficiency 6-A continuous output current
  • 200-kHz to 2-MHz Switching frequency
  • 0.6-V ±1% Voltage reference over temperature (–40°C to 150°C)
  • Synchronizes to external clock
  • Start-Up with prebiased voltage
  • Power good output
  • Adjustable slow start and sequencing
  • Cycle-by-cycle current limit and hiccup current protection
  • Adjustable input voltage UVLO
  • Thermally enhanced 16-pin 3-mm × 3-mm WQFN (RTE)
  • Create a custom design using the TPS54678 with the WEBENCH® Power Designer
  • Two 12-mΩ (typical) MOSFETs for high-efficiency 6-A continuous output current
  • 200-kHz to 2-MHz Switching frequency
  • 0.6-V ±1% Voltage reference over temperature (–40°C to 150°C)
  • Synchronizes to external clock
  • Start-Up with prebiased voltage
  • Power good output
  • Adjustable slow start and sequencing
  • Cycle-by-cycle current limit and hiccup current protection
  • Adjustable input voltage UVLO
  • Thermally enhanced 16-pin 3-mm × 3-mm WQFN (RTE)
  • Create a custom design using the TPS54678 with the WEBENCH® Power Designer

TPS54678 device is a full-featured 6-V, 6-A, synchronous step-down current mode converter with two integrated MOSFETs.

TPS54678 enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the IC footprint with a small 3-mm × 3-mm thermally enhanced WQFN package.

TPS54678 provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.

Efficiency is maximized through the integrated 12-mΩ MOSFETs. Using the enable (EN) pin, shutdown supply current is reduced by disabling the device.

The output voltage start-up ramp is controlled by the soft-start (SS) pin that can also be configured for sequencing or tracking. Monotonic start-up is achieved with prebiased voltage. Undervoltage lockout can be increased by programming the threshold with a resistor divider on the enable pin. An open-drain power good signal indicates the output is within 93% to 105% of its nominal voltage.

Cycle-by-cycle current limit, hiccup overcurrent protection and thermal shutdown protect the device during an overcurrent condition.

TPS54678 device is a full-featured 6-V, 6-A, synchronous step-down current mode converter with two integrated MOSFETs.

TPS54678 enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the IC footprint with a small 3-mm × 3-mm thermally enhanced WQFN package.

TPS54678 provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.

Efficiency is maximized through the integrated 12-mΩ MOSFETs. Using the enable (EN) pin, shutdown supply current is reduced by disabling the device.

The output voltage start-up ramp is controlled by the soft-start (SS) pin that can also be configured for sequencing or tracking. Monotonic start-up is achieved with prebiased voltage. Undervoltage lockout can be increased by programming the threshold with a resistor divider on the enable pin. An open-drain power good signal indicates the output is within 93% to 105% of its nominal voltage.

Cycle-by-cycle current limit, hiccup overcurrent protection and thermal shutdown protect the device during an overcurrent condition.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 8
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS54678 2.95-V to 6-V Input, 6-A Synchronous Step-Down SWIFT™ Converter With Hiccup Current Limit datasheet (Rev. B) PDF | HTML 06.05.2019
Anwendungshinweis Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 25.03.2024
Auswahlhilfe Buck Converter Quick Reference Guide (Rev. B) 08.04.2021
Anwendungshinweis Calculating Efficiency (Rev. A) 06.03.2020
Anwendungshinweis Minimizing Output Ripple During Startup (Rev. A) 20.05.2019
Auswahlhilfe SWIFT DC/DC Converters Selector Guide (Rev. G) 06.02.2019
Auswahlhilfe Power Management Guide 2018 (Rev. R) 25.06.2018
Anwendungshinweis Understanding Thermal Dissipation and Design of a Heatsink 04.05.2011

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS54678EVM-155 — TPS54678-Evaluierungsmodul

The Texas Instruments TPS54678EVM-155 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS54678 2.95V to 6V Output, 2MHz Synchronous Step-Down Switcher.
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

TPS54678 TINA TI Startup Reference Design

SLVMAH0.TSC (274 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

TPS54678 TINA TI Steadystate Reference Design

SLVMAH1.TSC (319 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

TPS54678 TINA TI Transient Model

SLVMAH2.ZIP (47 KB) - TINA-TI Spice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS54678 Unencrypted PSpice Average Model Package (Rev. A)

SLVM610A.ZIP (37 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS54678 Unencrypted PSpice Transient Model Package (Rev. A)

SLVMAG0A.ZIP (124 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Referenzdesign

PMP10900 — 3,3 V, 5 A, Abwärtswandler mit 2-stufigem LC-Filter – Referenzdesign

PMP10900 is designed to provide a 3.3V/5A output from 5V input. A two-stage LC filter is used to reach output ripple voltage <1mV.

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RTE) 16 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos