Home Energiemanagement Highside-Schalter und -Controller Highside-Schalt-Controller
Home
Energiemanagement
Highside-Schalter und -Controller
Highside-Schalt-Controller

TPS4810-Q1

AKTIV

Zweifach-Highside-Treiber für die Automobilindustrie, 100 V, niedriger Ruhestrom, mit Kurzschlusssch

Jetzt bestellen
Datenblatt

TPS4810-Q1

AKTIV
Jetzt bestellen

Produktdetails

Operating voltage (max) (V) 100 Operating voltage (min) (V) 3.5 Features Precharge FET driver, Reverse polarity protection, Short circuit protection, Undervoltage Lock Out (UVLO), VDS Sensing, high-side or Low-side current sense Reverse polarity protection (V) -65 Quiescent current (Iq) (µA) 35 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Short-circuit protection response time (µs) 4 Operating temperature range (°C) -40 to 125 Rating Automotive
Operating voltage (max) (V) 100 Operating voltage (min) (V) 3.5 Features Precharge FET driver, Reverse polarity protection, Short circuit protection, Undervoltage Lock Out (UVLO), VDS Sensing, high-side or Low-side current sense Reverse polarity protection (V) -65 Quiescent current (Iq) (µA) 35 IGate sink (typ) (A) 2 IGate source (typ) (A) 2 Short-circuit protection response time (µs) 4 Operating temperature range (°C) -40 to 125 Rating Automotive
VSSOP (DGX) 19 15.3 mm² (5.1 mm × 3 mm)
  • AEC-Q100 automotive qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump with 345µA capacity
  • Low quiescent current, 35µA in operation
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Two strong gate drivers (2A source and sink) for back to back MOSFET driving with separate control inputs (INP1, INP2)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, charge pump undervoltage, input undervoltage, and short-circuit comparator diagnosis (SCP_TEST)
  • Adjustable input undervoltage lockout (UVLO)
  • Pin-to-pin compatible with TPS1210-Q1
  • AEC-Q100 automotive qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • 3.5V to 95V input range (100V absolute maximum)
  • Reverse input protection down to –65V
  • Integrated 11V charge pump with 345µA capacity
  • Low quiescent current, 35µA in operation
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Two strong gate drivers (2A source and sink) for back to back MOSFET driving with separate control inputs (INP1, INP2)
  • Adjustable short circuit protection (ISCP) using external Rsense or MOSFET VDS sensing with adjustable delay (TMR)
  • High or low-side current sense configuration (CS_SEL)
  • Fault indication (FLT) during short circuit fault, charge pump undervoltage, input undervoltage, and short-circuit comparator diagnosis (SCP_TEST)
  • Adjustable input undervoltage lockout (UVLO)
  • Pin-to-pin compatible with TPS1210-Q1

The TPS48100-Q1 is a 100V low IQ smart high side driver with protection and diagnostics. With wide operating voltage range from 3.5V to 95V, the device is an excellent choice for 12V, 24V, and 48V system designs. The device can withstand and protect the loads from negative supply voltages down to –65V.

The device has two strong 2A (source and sink) gate drivers with separate control inputs (INP1, INP2) to drive back to back MOSFETs in common source configuration. Strong GATE driving enables power switching using parallel MOSFETs in high current system designs.

The device provides adjustable short-circuit protection. Configure the auto-retry and latch-off fault behavior. Complete current sensing either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.

A low quiescent current (35µA, typical) in operation enables always ON system designs. Quiescent current reduces to 1µA (typical) with EN/UVLO low.

The TPS48100-Q1 is available in a 19-pin VSSOP package.

The TPS48100-Q1 is a 100V low IQ smart high side driver with protection and diagnostics. With wide operating voltage range from 3.5V to 95V, the device is an excellent choice for 12V, 24V, and 48V system designs. The device can withstand and protect the loads from negative supply voltages down to –65V.

The device has two strong 2A (source and sink) gate drivers with separate control inputs (INP1, INP2) to drive back to back MOSFETs in common source configuration. Strong GATE driving enables power switching using parallel MOSFETs in high current system designs.

The device provides adjustable short-circuit protection. Configure the auto-retry and latch-off fault behavior. Complete current sensing either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.

A low quiescent current (35µA, typical) in operation enables always ON system designs. Quiescent current reduces to 1µA (typical) with EN/UVLO low.

The TPS48100-Q1 is available in a 19-pin VSSOP package.
filter Andere Highside-Schalt-Controller suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS4810-Q1 100V Automotive Low IQ , Back-to-Back MOSFET Smart High Side Driver With Short-Circuit Protection and Diagnostics datasheet (Rev. C) PDF | HTML 10.06.2026
Anwendungshinweis Basics of High-Side Switches and Controllers PDF | HTML 31.03.2026
Informationen zur funktionalen Sicherheit TPS4810-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 26.12.2024
Anwendungshinweis BMS Breakers and Designing With TPS1210-Q1 and TPS4810-Q1 Low IQ Smart High-Side Drivers System Architectures PDF | HTML 18.11.2024
Zertifikat TPS4810Q1EVM EU Declaration of Conformity (DoC) 22.05.2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS4810Q1EVM — TPS4810-Q1 – Evaluierungsmodul

Das TPS4810Q1EVM ermöglicht die Evaluierung der Referenzschaltung des intelligenten Highside-Treibers TPS4810–Q1. Der TPS4810-Q1 ist ein Highside-Controller für 3 bis 80 V. Seine beiden leistungsstarken Gate-Treiber (2 A) mit separaten Steuereingängen (INP1, INP2) ermöglichen die Ansteuerung von (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

TPS4810-Q1 PSpice Model

SLUM908.ZIP (303 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Berechnungstool

FET-INRUSH-SOA-CALC — FET SOA margin calculator for dvdt based startup

The design calculator allows user to estimate the FET SOA margin while starting up with dVdt based startup for inrush current control
Unterstützte Produkte und Hardware
Berechnungstool

TPS1210-Q1-CALC — Designrechner für TPS1210-Q1

The design calculator allows customer to size the external peripheral components while designing with TPS1210-Q1 and the TPS4810-Q1 controllers.
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSSOP (DGX) 19 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos