NEMKO IEC60950-1-am1 ed2.0
The TPS255x and TPS255x-1 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provide up to 1.5A of continuous load current. These devices offer a programmable current-limit threshold from 75mA to 1.7A (typical) through an external resistor. Current-limit accuracy as tight as ±6% can be achieved at the higher current-limit settings. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.
TPS255x devices limit the output current to a safe level by using a constant-current mode when the output load exceeds the current-limit threshold. TPS255x-1 devices provide circuit breaker functionality by latching off the power switch during overcurrent or reverse-voltage situations. An internal reverse-voltage comparator disables the power-switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during overcurrent and reverse-voltage conditions.
The TPS25530-1 devices have an integrated quick output discharge path when the switch is turned off, pulling the output down to ground. The current limit range is also extended to 2.64A (typical) with the 10kΩ ILIM setting for this device.
| Top-Dokumentation | Typ | Titel | Format-Optionen | Neueste englische Version herunterladen | Datum |
|---|---|---|---|---|---|
| * | Datenblatt | TPS255xx Precision Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. G) | PDF | HTML | 27.10.2026 | |
| Zertifikat | TPS255x UL 2367 Certificate of Compliance E169910-20090213 | 25.06.2024 | |||
| Zertifikat | TPS255x UL Certificate of Compliance IEC 62368-1 (Rev. A) | 24.06.2024 | |||
| Auswahlhilfe | Power Management Guide 2018 (Rev. R) | 25.06.2018 | |||
| Designleitfaden | 2-Port USB 3.0 Hub (TIDA-00287) | 01.08.2014 | |||
| EVM User's guide | Power-Distribution Switch with Adjustable Current-Limit Evaluation Module | 08.10.2008 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
The TPS2552/3DBVEVM and TPS2552/3DRVEVM are evaluation modules (EVM) for Texas Instruments’family of power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5 V to 6.5 V range. An onboard jumper sets the output current-limit to either 0.5 A or (...)
TPS2552/3DBVEVM und TPS2552/3DRVEVM sind Evaluierungsmodule (EVM) für die Produktfamilie der Stromverteilungsschalter mit einstellbarer Strombegrenzung von Texas Instruments. Diese EVMs arbeiten in einem Bereich von 2,5 V bis 6,5 V. Ein auf der Platine integrierter Jumper stellt die (...)
This verified reference design is a two-port, USB 3.0 compliant hub. It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports.
The hub design provides power (...)
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.