Home Energiemanagement Lastschalter
Home
Energiemanagement
Lastschalter

TPS22953

AKTIV

Lastschalter, 5,7 V, 5 A, 14 mΩ, mit einstellbarer Anstiegszeit, -Spannungsüberwachung

Jetzt bestellen
Datenblatt

TPS22953

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Product type Load switches Current limit type None Vin (max) (V) 5.7 Vin (min) (V) 0.7 Imax (A) 5 Rating Catalog Features Inrush current control, Power good signal, Reverse current blocking, Thermal shutdown, Under voltage lock out Number of channels 1 Quiescent current (Iq) (typ) (µA) 34 Shutdown current (ISD) (typ) (µA) 5 Soft start Adjustable Rise Time Ron (typ) (mΩ) 14 Operating temperature range (°C) -40 to 105
Product type Load switches Current limit type None Vin (max) (V) 5.7 Vin (min) (V) 0.7 Imax (A) 5 Rating Catalog Features Inrush current control, Power good signal, Reverse current blocking, Thermal shutdown, Under voltage lock out Number of channels 1 Quiescent current (Iq) (typ) (µA) 34 Shutdown current (ISD) (typ) (µA) 5 Soft start Adjustable Rise Time Ron (typ) (mΩ) 14 Operating temperature range (°C) -40 to 105
WSON (DSQ) 10 4 mm² (2 mm × 2 mm) WSON (DQC) 10 6 mm² (3 mm × 2 mm)
  • Integrated Single Channel Load Switch
  • Input Voltage Range: 0.7 V to 5.7 V
  • RON Resistance
    • RON = 14 mΩ at VIN = 5 V (VBIAS = 5 V)
  • 5-A Maximum Continuous Switch Current
  • Adjustable Undervoltage Lockout Threshold (UVLO)
  • Adjustable Voltage Supervisor with Power Good (PG) Indicator
  • Adjustable Output Slew Rate Control
  • Enhanced Quick Output Discharge Remains Active after Power is Removed (TPS22954 Only)
    • 15 Ω (Typ) Discharges 100 µF Within 10 ms
  • Reverse Current Blocking when Disabled (TPS22953 Only)
  • Automatic Restart after Supervisor Fault Detection When Enabled
  • Thermal Shutdown
  • Low Quiescent Current ≤ 50 µA
  • SON 10-pin Package with Thermal Pad
  • ESD Performance Tested Per JESD 22
    • 2-kV HBM and 750-V CDM
  • Integrated Single Channel Load Switch
  • Input Voltage Range: 0.7 V to 5.7 V
  • RON Resistance
    • RON = 14 mΩ at VIN = 5 V (VBIAS = 5 V)
  • 5-A Maximum Continuous Switch Current
  • Adjustable Undervoltage Lockout Threshold (UVLO)
  • Adjustable Voltage Supervisor with Power Good (PG) Indicator
  • Adjustable Output Slew Rate Control
  • Enhanced Quick Output Discharge Remains Active after Power is Removed (TPS22954 Only)
    • 15 Ω (Typ) Discharges 100 µF Within 10 ms
  • Reverse Current Blocking when Disabled (TPS22953 Only)
  • Automatic Restart after Supervisor Fault Detection When Enabled
  • Thermal Shutdown
  • Low Quiescent Current ≤ 50 µA
  • SON 10-pin Package with Thermal Pad
  • ESD Performance Tested Per JESD 22
    • 2-kV HBM and 750-V CDM

The TPS22953/54 are small, single channel load switches with controlled turn on. The devices contain a N-channel MOSFET that can operate over an input voltage range of 0.7 V to 5.7 V and can support a maximum continuous current of 5 A.

The integrated adjustable undervoltage lockout (UVLO) and adjustable power good (PG) threshold provides voltage monitoring as well as robust power sequencing. The adjustable rise time control of the device greatly reduces inrush current for a wide variety of bulk load capacitances, thereby reducing or eliminating power supply droop. The switch is independently controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. A 15-Ω on-chip load is integrated into the device for a quick discharge of the output when switch is disabled. The enhanced Quick Output Discharge (QOD) remains active for short time after power is removed from the device to finish discharging the output.

The TPS22953/54 are available in small, space-saving 10-SON packages with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

The TPS22953/54 are small, single channel load switches with controlled turn on. The devices contain a N-channel MOSFET that can operate over an input voltage range of 0.7 V to 5.7 V and can support a maximum continuous current of 5 A.

The integrated adjustable undervoltage lockout (UVLO) and adjustable power good (PG) threshold provides voltage monitoring as well as robust power sequencing. The adjustable rise time control of the device greatly reduces inrush current for a wide variety of bulk load capacitances, thereby reducing or eliminating power supply droop. The switch is independently controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. A 15-Ω on-chip load is integrated into the device for a quick discharge of the output when switch is disabled. The enhanced Quick Output Discharge (QOD) remains active for short time after power is removed from the device to finish discharging the output.

The TPS22953/54 are available in small, space-saving 10-SON packages with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

filter Andere Lastschalter suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung.
TPS22954 AKTIV 5,7-V-, 5-A-, 14-mΩ-Lastschalter, mit einstellbarer Anstiegszeit, -Spannungsüberwachung und Ausgangs Pin-to-pin with no reverse current blocking and output discharge
Ähnliche Funktionalität wie der verglichene Baustein.
TPS22992 AKTIV Lastschalter für 5,5 V, 6 A, 8,7 mΩ mit einstellbarer Anstiegszeit und einstellbarer Ausgangsentladu Lower Ron with short circuit protection

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 13
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS2295x 5.7 V, 5 A, 14 mΩ On-Resistance Load Switch datasheet (Rev. D) PDF | HTML 16.09.2016
E-book 11 Ways to Protect Your Power Path 03.07.2019
Application brief Making the Switch to an Integrated Load Switch 11.06.2019
Anwendungshinweis Integrated Load Switches Versus Discrete MOSFETs (Rev. A) 06.05.2019
Anwendungshinweis Load Switch Thermal Considerations (Rev. A) 11.10.2018
Anwendungshinweis Basics of Load Switches (Rev. A) 05.09.2018
Anwendungshinweis Power Multiplexing Using Load Switches and eFuses (Rev. A) 20.06.2017
Anwendungshinweis Selecting a Load Switch to Replace a Discrete Solution 30.04.2017
Anwendungshinweis Timing of Load Switches 27.04.2017
Anwendungshinweis Reverse Current Protection in Load Switches 19.05.2016
Anwendungshinweis Quiescent Current vs Shutdown Current for Load Switch Power Consumption 30.03.2016
Technischer Artikel When to use load switches in place of discrete MOSFETs PDF | HTML 03.02.2016
Anwendungshinweis Managing Inrush Current (Rev. A) 28.05.2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS22953EVM — TPS22953 5,7 V, 16 mΩ-Durchlasswiderstand-Lastschalter – Evaluierungsmodul

The TPS22953 device is a single channel low RON load switch with an operating voltage range of 0.7 V to 5.7 V. Both package versions DSQ (0.4mm pin pitch) and DQC (0.5mm pin pitch) of the TPS22953 are available on the TPS22953EVM for evaluation. The TPS22953 integrates a voltage supervisor which (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

TPS22953 TINA-TI Reference Design (Rev. A)

SLVMAT4A.TSC (182 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

TPS22953 TINA-TI Transient Spice Model (Rev. A)

SLVMAT5A.ZIP (28 KB) - TINA-TI Spice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS22953 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMAS6B.ZIP (54 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WSON (DSQ) 10 Ultra Librarian
WSON (DQC) 10 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos