Home Energiemanagement Lastschalter
Home
Energiemanagement
Lastschalter

TPS22946

AKTIV

Lastschalter mit einstellbarer Strombegrenzung, 5,5 V, 0,15 A, 400 mΩ

Jetzt bestellen
Datenblatt

TPS22946

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Product type Load switches Current limit type Adjustable Vin (max) (V) 5.5 Vin (min) (V) 1.62 Imax (A) 0.235 Rating Catalog Features Thermal shutdown Number of channels 1 Quiescent current (Iq) (typ) (µA) 1.3 Shutdown current (ISD) (typ) (µA) 0.1 Soft start Fixed Rise Time Ron (typ) (mΩ) 400 Operating temperature range (°C) -40 to 85
Product type Load switches Current limit type Adjustable Vin (max) (V) 5.5 Vin (min) (V) 1.62 Imax (A) 0.235 Rating Catalog Features Thermal shutdown Number of channels 1 Quiescent current (Iq) (typ) (µA) 1.3 Shutdown current (ISD) (typ) (µA) 0.1 Soft start Fixed Rise Time Ron (typ) (mΩ) 400 Operating temperature range (°C) -40 to 85
DSBGA (YZP) 6 2.1875 mm² (— mm × — mm)
  • Ultralow Quiescent Current 1 µA (Typical)
    at VIN = 1.8 V
  • Input Voltage Range: 1.62 V to 5.5 V
  • Low ON-Resistance
    • rON = 300 mΩ at VIN = 5.5 V
    • rON = 400 mΩ at VIN = 3.3 V
    • rON = 500 mΩ at VIN = 2.5 V
    • rON = 600 mΩ at VIN = 1.8 V
  • Selectable Minimum Current Limit:
    155 mA, 70 mA, or 30 mA
  • Integrated Inrush Current Time-out (8 ms)
  • Shutdown Current: < 1 µA
  • Thermal Shutdown
  • Fault Blanking
  • Auto Restart
  • Overcurrent Condition Time-out (Automatic
    Disable for Permanent Overcurrent)
  • 1.8-V Compatible Control Input
  • ESD Performance Tested Per JESD 22
    • 6000-V Human-Body Model
      (A114-B, Class II)
  • Tiny DSGBA Package 1.4 mm × 0.9 mm (YZP)
  • Ultralow Quiescent Current 1 µA (Typical)
    at VIN = 1.8 V
  • Input Voltage Range: 1.62 V to 5.5 V
  • Low ON-Resistance
    • rON = 300 mΩ at VIN = 5.5 V
    • rON = 400 mΩ at VIN = 3.3 V
    • rON = 500 mΩ at VIN = 2.5 V
    • rON = 600 mΩ at VIN = 1.8 V
  • Selectable Minimum Current Limit:
    155 mA, 70 mA, or 30 mA
  • Integrated Inrush Current Time-out (8 ms)
  • Shutdown Current: < 1 µA
  • Thermal Shutdown
  • Fault Blanking
  • Auto Restart
  • Overcurrent Condition Time-out (Automatic
    Disable for Permanent Overcurrent)
  • 1.8-V Compatible Control Input
  • ESD Performance Tested Per JESD 22
    • 6000-V Human-Body Model
      (A114-B, Class II)
  • Tiny DSGBA Package 1.4 mm × 0.9 mm (YZP)

The TPS22946 is an ultralow power load switch that provides protection to systems and loads in high-current conditions. The device contains a 300-mΩ current-limited P-channel MOSFET that can operate over an input voltage range of 1.62 V to 5.5 V. The switch is controlled by an on/off input (ON), which can interface directly with low-voltage control signals. The TPS22946 includes thermal shutdown protection that prevents damage to the device when a continuous over-current condition causes excessive heating by turning off the switch.

When the switch current reaches the maximum limit, the TPS22946 operates in a constant-current mode to prohibit excessive currents from causing damage. The current limit can be selected using the CL input: a high CL input sets the current limit to 155 mA, a low CL input sets the current limit to 70 mA, and a floating CL input sets the current limit to 30 mA.

If the constant current condition persists after 10 ms, the switch is turned off and the fault signal pin (OC) is pulled low. The TPS22946 has an auto-restart feature which turns the switch on again after 70 ms if the ON pin is still active. If the TPS22946 remains in an over-current condition for 5 seconds, the device shuts off until it is turned on again by setting the ON control signal off and then on.

If the device is used to protect an LDO, the inrush current required by the LDO at startup can, in some cases, exceed the current limit and initiate a blanking (current limiting) condition. The TPS22946 provides allowance for this scenario during startup of the LDO by temporarily increasing the current limit to 435 mA for 8 ms after the load switch is enabled.

The TPS22946 is available in space-saving 6-pin DSBGA (YZP) package. The device is characterized for operation over the free-air temperature range of –40°C to 85°C.

The TPS22946 is an ultralow power load switch that provides protection to systems and loads in high-current conditions. The device contains a 300-mΩ current-limited P-channel MOSFET that can operate over an input voltage range of 1.62 V to 5.5 V. The switch is controlled by an on/off input (ON), which can interface directly with low-voltage control signals. The TPS22946 includes thermal shutdown protection that prevents damage to the device when a continuous over-current condition causes excessive heating by turning off the switch.

When the switch current reaches the maximum limit, the TPS22946 operates in a constant-current mode to prohibit excessive currents from causing damage. The current limit can be selected using the CL input: a high CL input sets the current limit to 155 mA, a low CL input sets the current limit to 70 mA, and a floating CL input sets the current limit to 30 mA.

If the constant current condition persists after 10 ms, the switch is turned off and the fault signal pin (OC) is pulled low. The TPS22946 has an auto-restart feature which turns the switch on again after 70 ms if the ON pin is still active. If the TPS22946 remains in an over-current condition for 5 seconds, the device shuts off until it is turned on again by setting the ON control signal off and then on.

If the device is used to protect an LDO, the inrush current required by the LDO at startup can, in some cases, exceed the current limit and initiate a blanking (current limiting) condition. The TPS22946 provides allowance for this scenario during startup of the LDO by temporarily increasing the current limit to 435 mA for 8 ms after the load switch is enabled.

The TPS22946 is available in space-saving 6-pin DSBGA (YZP) package. The device is characterized for operation over the free-air temperature range of –40°C to 85°C.
filter Andere Lastschalter suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
TPS22950 AKTIV Lastschalter mit 5,5 V, 3,2 A, 34 mΩ und einstellbarer Strombegrenzung Higher current capability with reverse current blocking and quick output discharge

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS22946 Ultralow Power, Low Input Voltage, Current-Limited Load Switch With Shutoff, Auto-Restart, and Overcurrent Condition Time-Out datasheet (Rev. B) PDF | HTML 08.04.2015
Anwendungshinweis Load Switch Thermal Considerations (Rev. A) 11.10.2018
Anwendungshinweis Basics of Load Switches (Rev. A) 05.09.2018
Auswahlhilfe Power Management Guide 2018 (Rev. R) 25.06.2018
Anwendungshinweis Basics of eFuses (Rev. A) 05.04.2018
Technischer Artikel How to use load switches to power your wearable PDF | HTML 19.10.2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS22946EVM-499 — Evaluierungsmodul für strombegrenzte Lastschalter TPS22946

The TPS22946EVM-499 evaluation module (EVM) allows the user to connect power to and control the TPS22946 ultra-small, CSP-6 package load switch. Parameters such as on state resistance, slew rate and current limit properties can be easily evaluated.

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Referenzdesign

TIDA-010008 — Referenzdesign auf Basis von Flachklemmen-TVS zum Schutz vor Transienten für Stromnetzanwendungen

Dieses Referenzdesign bietet mehrere Ansätze zum Schutz des analogen AC- oder DC-Eingangs, des analogen DC-Ausgangs, des binären AC- oder DC-Eingangs, des digitalen Ausgangs mit einem Highside- oder Low-Side-Treiber, der LCD-Vorspannung, der USB-Schnittstellen (Strom und Daten) und der auf der (...)
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-010019 — RTD-Ersatz für Kaltstellenkompensation in einem Temperatursensor – Referenzdesign

Temperaturerfassungsanwendungen, die ein Thermoelement (TC) verwenden, erfordern einen präzisen lokalen Temperatursensor, um eine hohe Genauigkeit zu erreichen. In diesem Referenzdesign werden Lösungen für Designherausforderungen wie Kaltstellenkompensation (CJC) oder ein analoges TC-Frontend mit (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DSBGA (YZP) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos