Home Energiemanagement Leistungsschutzschalter und Controller eFuses (integrierte Hot-Swaps)
Home
Energiemanagement
Leistungsschutzschalter und Controller
eFuses (integrierte Hot-Swaps)

TPS1685

AKTIV

Stapelbare integrierte Hot-Swap (eFuse), 9 V bis 80 V, 3,5 mΩ, 20 A, mit exakter und schneller Strom

Jetzt bestellen
Datenblatt

TPS1685

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Vabsmax_cont (V) 92 Vin (max) (V) 80 Vin (min) (V) 9 Current limit (max) (A) 20 Current limit (min) (A) 2 Features Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Soft-start, Thermal shutdown Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 3.5 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0022 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 92 Vin (max) (V) 80 Vin (min) (V) 9 Current limit (max) (A) 20 Current limit (min) (A) 2 Features Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Soft-start, Thermal shutdown Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 3.5 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0022 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
LQFN-CLIP (VMA) 23 30 mm² (5 mm × 6 mm)
  • Input operating voltage range: 9V to 80V
    • 92V absolute maximum
    • Withstands negative voltages up to –5V at output
  • Integrated FET with low on-resistance: RON = 3.5mΩ (typical)
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Adjustable overvoltage protection
  • Supports parallel connection of multiple eFuses with device state synchronization and current sharing
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Precise load current monitoring
    • <3% error for over 50-100% of maximum current
    • 1MHz bandwidth
  • Robust overcurrent protection
    • Circuit-breaker response
    • Adjustable threshold: 2A to 20A
    • Overcurrent protection accuracy: ±3%
    • Adjustable transient overcurrent timer (ITIMER) to support peak currents
  • Fast-trip response to short-circuit events
  • Overtemperature protection (OTP) with analog die temperature monitor output (TEMP)
    • FET SOA: 0.7W√s
  • FET health monitoring and reporting
  • Fault indication pin (FLT )
  • Power Good indication pin (PGOOD)
  • Small footprint: QFN 6mm × 5mm
    • IPC9592B clearance for 60V
  • Input operating voltage range: 9V to 80V
    • 92V absolute maximum
    • Withstands negative voltages up to –5V at output
  • Integrated FET with low on-resistance: RON = 3.5mΩ (typical)
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Adjustable overvoltage protection
  • Supports parallel connection of multiple eFuses with device state synchronization and current sharing
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Precise load current monitoring
    • <3% error for over 50-100% of maximum current
    • 1MHz bandwidth
  • Robust overcurrent protection
    • Circuit-breaker response
    • Adjustable threshold: 2A to 20A
    • Overcurrent protection accuracy: ±3%
    • Adjustable transient overcurrent timer (ITIMER) to support peak currents
  • Fast-trip response to short-circuit events
  • Overtemperature protection (OTP) with analog die temperature monitor output (TEMP)
    • FET SOA: 0.7W√s
  • FET health monitoring and reporting
  • Fault indication pin (FLT )
  • Power Good indication pin (PGOOD)
  • Small footprint: QFN 6mm × 5mm
    • IPC9592B clearance for 60V

The TPS1685x is an integrated high current circuit protection and power management device. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short-circuits and excessive inrush current. Applications with particular inrush current requirements can set the output slew rate with an external capacitor. The user sets the output current limit level per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse. An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management such as Intel PSYS and PROCHOT# to optimize server and data-center performance.

Connect multiple TPS1685x devices in parallel to increase the total current capacity for high power systems. All devices actively synchronize the operating state and share current during start-up as well as steady state to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

The devices are characterized for operation over a junction temperature range from –40°C to +125°C.

The TPS1685x is an integrated high current circuit protection and power management device. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short-circuits and excessive inrush current. Applications with particular inrush current requirements can set the output slew rate with an external capacitor. The user sets the output current limit level per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse. An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management such as Intel PSYS and PROCHOT# to optimize server and data-center performance.

Connect multiple TPS1685x devices in parallel to increase the total current capacity for high power systems. All devices actively synchronize the operating state and share current during start-up as well as steady state to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

The devices are characterized for operation over a junction temperature range from –40°C to +125°C.
filter Andere eFuses (integrierte Hot-Swaps) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS1685x 9V to 80V, 3.5mΩ, 20A Stackable Integrated Hotswap (eFuse) With Accurate and Fast Current Monitor datasheet (Rev. D) PDF | HTML 14.07.2026
Anwendungshinweis Active Current Sharing: Advanced Current Distribution Feature From TI's Smart eFuses PDF | HTML 09.05.2025
Technischer Artikel Powering modern AI data centers with industry’s first integrated 48V integrated hot swap (eFuse) PDF | HTML 25.02.2025
Anwendungshinweis Enhancing Server Power Design Using Advanced Features of TI’s Smart eFuses PDF | HTML 29.01.2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS1685EVM — TPS1685 – Evaluierungsmodul

Das TPS1685EVM wird verwendet, um die Leistung des TPS1685 eFuse-Bausteins zu evaluieren. Das TPS1685EVM wird mit zwei parallel geschalteten TPS16850-eFuses geliefert, um ein 54-V-Design (typisch) und ein 40-A-Design (stationärer Zustand) zu evaluieren. Dieses Evaluierungsmodul umfasst zwei (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

TPS1685 PSpice Transient Model

SLVMED5.ZIP (68 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS16851 PSpice Transient Model

SLVMED3.ZIP (66 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Berechnungstool

TPS1685-CALC — TPS1685 Design Calculator

The design calculator allows customer to size the external peripheral components while designing with TPS1685 eFuse.
Unterstützte Produkte und Hardware
Berechnungstool

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-050090 — Referenzdesign m. Leistungszweigschutz (54 V, 5 kW) f. KI-Rechenzentren m. eFuses TPS1689 u. TPS1685

Dieses Referenzdesign zeigt einen Eingangsleistungszweig-Schutzschaltkreis mit 54 V und 5 kW für KI-gestützte Rechenzentren unter Verwendung von einem bzw. fünf parallel geschalteten eFuse-Bausteinen der Reihe TPS1689 und TPS1685. Diese integrierten Hochstrom-Schaltkreisschutzbausteine bieten (...)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
LQFN-CLIP (VMA) 23 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos