TLV6003

AKTIV

Einzelner Präzisions-Operationsverstärker, Ultra-Low-Power (980 nA), 16 V, Rail-to-Rail-Eingang und

Jetzt bestellen

Datenblatt

document-pdfAcrobat TLV6003 980-nA, 16-V, Precision, Rail-to-Rail Input and Output, Operational Amplifier datasheet (Englisch) PDF | HTML

TLV6003

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Vos (offset voltage at 25°C) (max) (mV)

0.55

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

250

GBW (typ) (MHz)

0.0055

Slew rate (typ) (V/µs)

0.0025

Rail-to-rail

In, Out

Iq per channel (typ) (mA)

0.00098

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.0000002

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

5

Output swing headroom (to negative supply) (typ) (V)

0.09

Output swing headroom (to positive supply) (typ) (V)

-0.02

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

16

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Vos (offset voltage at 25°C) (max) (mV)

0.55

Offset drift (typ) (µV/°C)

2

Input bias current (max) (pA)

250

GBW (typ) (MHz)

0.0055

Slew rate (typ) (V/µs)

0.0025

Rail-to-rail

In, Out

Iq per channel (typ) (mA)

0.00098

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.0000002

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

5

Output swing headroom (to negative supply) (typ) (V)

0.09

Output swing headroom (to positive supply) (typ) (V)

-0.02

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

Micro-power operation: 1.2 µA (maximum)
Low input offset voltage: 550 µV (maximum)
Reverse battery protection up to 18 V
Rail-to-rail input/output
Gain bandwidth product: 5.5 kHz
Specified temperature range:
T_A = –40°C to +125°C
Operating temperature range:
T_A = –55°C to +125°C
Input common-mode range exceeds the rails:
–0.1 V to V_CC + 5 V
Supply voltage range: 2.5 V to 16 V
Small package:
- 5-pin SOT-23

Micro-power operation: 1.2 µA (maximum)
Low input offset voltage: 550 µV (maximum)
Reverse battery protection up to 18 V
Rail-to-rail input/output
Gain bandwidth product: 5.5 kHz
Specified temperature range:
T_A = –40°C to +125°C
Operating temperature range:
T_A = –55°C to +125°C
Input common-mode range exceeds the rails:
–0.1 V to V_CC + 5 V
Supply voltage range: 2.5 V to 16 V
Small package:
- 5-pin SOT-23

The TLV6003 is a nanopower operational amplifier consuming only 980 nA per channel, while offering very low maximum offset. Reverse battery protection guards the amplifier from an overcurrent condition due to improper battery installation. For harsh environments, the inputs can be taken 5 V greater than the positive supply rail without damage to the device.

The low supply current is coupled with a low input bias current, enabling the device to be used with high series resistance input sources, such as PIR motion detectors and carbon monoxide sensors. DC accuracy is maintained with a low max offset voltage of 550 µV (25°C), a typical CMRR of 120 dB, and a minimum open-loop gain of 112 dB at 2.7 V.

The maximum operating supply voltage is specified from 2.5 V to 16 V, with electrical characteristics specified at 2.7 V, 5 V, and 15 V. The 2.5-V operation makes this device compatible with Li-Ion battery-powered systems, making the TLV6003 a good choice for input signal gain and buffering into low-power microcontrollers, such as TI’s MSP430.

The TLV6003 is available in a small SOT-23 package.

The TLV6003 is a nanopower operational amplifier consuming only 980 nA per channel, while offering very low maximum offset. Reverse battery protection guards the amplifier from an overcurrent condition due to improper battery installation. For harsh environments, the inputs can be taken 5 V greater than the positive supply rail without damage to the device.

The low supply current is coupled with a low input bias current, enabling the device to be used with high series resistance input sources, such as PIR motion detectors and carbon monoxide sensors. DC accuracy is maintained with a low max offset voltage of 550 µV (25°C), a typical CMRR of 120 dB, and a minimum open-loop gain of 112 dB at 2.7 V.

The maximum operating supply voltage is specified from 2.5 V to 16 V, with electrical characteristics specified at 2.7 V, 5 V, and 15 V. The 2.5-V operation makes this device compatible with Li-Ion battery-powered systems, making the TLV6003 a good choice for input signal gain and buffering into low-power microcontrollers, such as TI’s MSP430.

The TLV6003 is available in a small SOT-23 package.

filter

Andere Präzisionsoperationsverstärker (Vos < 1 mV) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen	Datum
*	Datenblatt	TLV6003 980-nA, 16-V, Precision, Rail-to-Rail Input and Output, Operational Amplifier datasheet	PDF \| HTML		11.10.2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML