NEU

TLV4825

AKTIV

Vierfacher, 5,5 V, 3 MHz Nulldrift-CMOS-Präzisions-Operationsverstärker

Jetzt bestellen

Datenblatt

document-pdfAcrobat TLVx825 3.5MHz, 1.8V to 5.5V, High Precision, Zero-Drift Operational Amplifiers datasheet (Rev. A) (Englisch) PDF | HTML

TLV4825

AKTIV

Jetzt bestellen

Produktdetails

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Vos (offset voltage at 25°C) (max) (mV)

0.004

Offset drift (typ) (µV/°C)

0.02

GBW (typ) (MHz)

3.5

Features

Cost Optimized, Zero Drift

Slew rate (typ) (V/µs)

1.8

Rail-to-rail

In-Out

Iq per channel (typ) (mA)

0.5

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.007

Output swing headroom (to positive supply) (typ) (V)

-0.007

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Vos (offset voltage at 25°C) (max) (mV)

0.004

Offset drift (typ) (µV/°C)

0.02

GBW (typ) (MHz)

3.5

Features

Cost Optimized, Zero Drift

Slew rate (typ) (V/µs)

1.8

Rail-to-rail

In-Out

Iq per channel (typ) (mA)

0.5

CMRR (typ) (dB)

120

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.007

Output swing headroom (to positive supply) (typ) (V)

-0.007

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

Ultra-low offset drift: ±0.02µV/°C
Flat low frequency noise: 0.3µVPP (0.1 to 10Hz)
Ultra-low offset: ±4µV
Rail-to-rail input and output
Very high AOL, CMRR, PSRR: > 120dB
Wide input common-mode: 100mV beyond rails
Low input bias current: ±100pA
Low thermal noise floor: 15nV/√Hz
Wide gain bandwidth: 3.5MHz
High CL drive: 1nF (no sustained oscillations)
Low quiescent current: 500µA/channel
Wide supply range: 1.8V to 5.5V
Wide temperature range: –40°C to +125°C

Ultra-low offset drift: ±0.02µV/°C
Flat low frequency noise: 0.3µVPP (0.1 to 10Hz)
Ultra-low offset: ±4µV
Rail-to-rail input and output
Very high AOL, CMRR, PSRR: > 120dB
Wide input common-mode: 100mV beyond rails
Low input bias current: ±100pA
Low thermal noise floor: 15nV/√Hz
Wide gain bandwidth: 3.5MHz
High CL drive: 1nF (no sustained oscillations)
Low quiescent current: 500µA/channel
Wide supply range: 1.8V to 5.5V
Wide temperature range: –40°C to +125°C

The TLVx825 family of single, dual, and quad channel operational amplifiers enable precision performance such as lower offset, lower offset drift over temperature, greater offset stability over time and a flat noise floor. This level of performance is crucial to a variety of systems focusing on precision voltage sensing from sensors and precision current sensing using smaller shunt resistors.

TLVx825 uses zero-drift architecture to achieve an input referred offset voltage of 4µV, an offset drift of 0.02µV/°C and a low frequency noise of 320nVPP in the standard 0.1 – 10Hz range. This combination of specs provides excellent accuracy in high gain applications, thereby greatly reducing the need for system level calibration.

Additionally, with a quiescent current of 500µA, the TLVx825 is able to achieve a bandwidth of 3.5MHz and a broadband noise of 15nV/√Hz. This ability is crucial to achieve higher linearity, and signal-to-noise ratio in applications involving higher resolution, mid-speed analog to digital converters (ADCs) while minimizing system power.

TLVx825 is operational from 1.8V to 5.5V, and is available in standard packages for broader industrial applications as well as the micro-size packages to fit in the space-constrained portable applications. The devices are specified for operation from –40°C to +125°C.

The TLVx825 family of single, dual, and quad channel operational amplifiers enable precision performance such as lower offset, lower offset drift over temperature, greater offset stability over time and a flat noise floor. This level of performance is crucial to a variety of systems focusing on precision voltage sensing from sensors and precision current sensing using smaller shunt resistors.

TLVx825 uses zero-drift architecture to achieve an input referred offset voltage of 4µV, an offset drift of 0.02µV/°C and a low frequency noise of 320nVPP in the standard 0.1 – 10Hz range. This combination of specs provides excellent accuracy in high gain applications, thereby greatly reducing the need for system level calibration.

Additionally, with a quiescent current of 500µA, the TLVx825 is able to achieve a bandwidth of 3.5MHz and a broadband noise of 15nV/√Hz. This ability is crucial to achieve higher linearity, and signal-to-noise ratio in applications involving higher resolution, mid-speed analog to digital converters (ADCs) while minimizing system power.

TLVx825 is operational from 1.8V to 5.5V, and is available in standard packages for broader industrial applications as well as the micro-size packages to fit in the space-constrained portable applications. The devices are specified for operation from –40°C to +125°C.

filter

Andere Präzisionsoperationsverstärker (Vos < 1 mV) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen		Datum
*	Datenblatt	TLVx825 3.5MHz, 1.8V to 5.5V, High Precision, Zero-Drift Operational Amplifiers datasheet (Rev. A)	PDF \| HTML		24.06.2026
	Technischer Artikel	Enabling precision amplifier performance for every design	PDF \| HTML		24.06.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Simulationsmodell