TLV2764

AKTIV

Vier-Kanal-RRIO-Operationsverstärker, 3,6 V, 500 kHz

Jetzt bestellen

Datenblatt

document-pdfAcrobat Family of 1.8-V MicroPower Rail-to-Rail Input/Output Op Amps with Shutdown datasheet (Rev. F) (Englisch)

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität.

TLV9044

AKTIV

Vierfacher 5,5 V, 350 kHz Operationsverstärker mit extrem niedrigen 1,2 V und niedrigem Ruhestrom (1 Lower power (0.1mA Iq), lower noise (66nV/√Hz), better accuracy (2.25mV Vos max)

TLV2764

AKTIV

Jetzt bestellen

Produktdetails

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

3.6

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.5

Slew rate (typ) (V/µs)

0.22

Vos (offset voltage at 25°C) (max) (mV)

3.5

Iq per channel (typ) (mA)

0.02

Vn at 1 kHz (typ) (nV√Hz)

95

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

9

Input bias current (max) (pA)

15

CMRR (typ) (dB)

76

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.01

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

3.6

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.5

Slew rate (typ) (V/µs)

0.22

Vos (offset voltage at 25°C) (max) (mV)

3.5

Iq per channel (typ) (mA)

0.02

Vn at 1 kHz (typ) (nV√Hz)

95

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

9

Input bias current (max) (pA)

15

CMRR (typ) (dB)

76

Iout (typ) (A)

0.007

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.01

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

PDIP (N)

14

181.42 mm² (19.3 mm × 9.4 mm)

Low Supply Voltage … 1.8 V to 3.6 V
Very Low Supply Current … 20 µA
(per channel)
Ultralow Power Shut-Down Mode
- I_DD(SHDN) = 10 nA/Channel
CMOS Rail-to-Rail Input/Output
Input Common-Mode Voltage Range …
0.2 V to V_DD + 0.2 V
Input Offset Voltage … 550 µV
Wide Bandwidth … 500 kHz
Slew Rate … 0.20 V/µs
Specified Temperature Range:
0°C to 70°C … Commercial Grade
–40°C to 85°C … Industrial Grade
Ultrasmall Packaging
5 or 6 Pin SOT-23 (TLV2760/1)
8 or 10 Pin MSOP (TLV2762/3)
Universal Op-Amp EVM

Low Supply Voltage … 1.8 V to 3.6 V
Very Low Supply Current … 20 µA
(per channel)
Ultralow Power Shut-Down Mode
- I_DD(SHDN) = 10 nA/Channel
CMOS Rail-to-Rail Input/Output
Input Common-Mode Voltage Range …
0.2 V to V_DD + 0.2 V
Input Offset Voltage … 550 µV
Wide Bandwidth … 500 kHz
Slew Rate … 0.20 V/µs
Specified Temperature Range:
0°C to 70°C … Commercial Grade
–40°C to 85°C … Industrial Grade
Ultrasmall Packaging
5 or 6 Pin SOT-23 (TLV2760/1)
8 or 10 Pin MSOP (TLV2762/3)
Universal Op-Amp EVM

The TLV276x single supply operational amplifiers provide 500 kHz bandwidth from only 20 µA while operating down to 1.8 V over the industrial temperature range. The maximum recommended supply voltage is 3.6 V, which allows the devices to be operated from (.1.8 V supplies down to .0.9 V) two AA or AAA cells. The devices have been characterized at 1.8 V (end of life of 2 AA(A) cells) and at 2.4 V (nominal voltage of 2 NiCd/NiMH cells). The TLV276x have rail-to-rail input and output capability which is a necessity at 1.8 V.

The low supply current is coupled with extremely low input bias currents enabling them to be used with mega-ohm resistors. Low shutdown current of only 10 nA make these devices ideal for low frequency measurement applications desiring long active battery life.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.

The TLV276x single supply operational amplifiers provide 500 kHz bandwidth from only 20 µA while operating down to 1.8 V over the industrial temperature range. The maximum recommended supply voltage is 3.6 V, which allows the devices to be operated from (.1.8 V supplies down to .0.9 V) two AA or AAA cells. The devices have been characterized at 1.8 V (end of life of 2 AA(A) cells) and at 2.4 V (nominal voltage of 2 NiCd/NiMH cells). The TLV276x have rail-to-rail input and output capability which is a necessity at 1.8 V.

The low supply current is coupled with extremely low input bias currents enabling them to be used with mega-ohm resistors. Low shutdown current of only 10 nA make these devices ideal for low frequency measurement applications desiring long active battery life.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 3

Top-Dokumentation	Typ	Titel	Format-Optionen
*	Datenblatt	Family of 1.8-V MicroPower Rail-to-Rail Input/Output Op Amps with Shutdown datasheet (Rev. F)		20.08.2013
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017
	Anwendungshinweis	TLV276x EMI Immunity Performance		15.11.2012

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Simulationsmodell