TLE2142-Q1

AKTIV

Präziser Zweifach-Highspeed-Operationsverstärker für die Automobilindustrie, rauscharm, mit JFET-Ein

Jetzt bestellen

Datenblatt

document-pdfAcrobat TLE2142-Q1 Excalibur™ Low-Noise High-Speed Precision Operational Amplifier datasheet (Rev. A) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.

OPA2991-Q1

AKTIV

Zweifach-Operationsverstärker für die Automobilindustrie, 40 V, 4,5 MHz Rail-to-rail I/O, lower offset voltage (0.895 mV), lower power (0.56 mA), higher output current (75 mA)

TLE2142-Q1

AKTIV

Jetzt bestellen

Produktdetails

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Rail-to-rail

In to V-

GBW (typ) (MHz)

6

Slew rate (typ) (V/µs)

45

Vos (offset voltage at 25°C) (max) (mV)

1.2

Iq per channel (typ) (mA)

3.45

Vn at 1 kHz (typ) (nV√Hz)

10.5

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1.7

Features

High Cload Drive

Input bias current (max) (pA)

1500000

CMRR (typ) (dB)

108

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Rail-to-rail

In to V-

GBW (typ) (MHz)

6

Slew rate (typ) (V/µs)

45

Vos (offset voltage at 25°C) (max) (mV)

1.2

Iq per channel (typ) (mA)

3.45

Vn at 1 kHz (typ) (nV√Hz)

10.5

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1.7

Features

High Cload Drive

Input bias current (max) (pA)

1500000

CMRR (typ) (dB)

108

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

Qualified for automotive applications
Low noise:
- 10Hz: 15nV/√ Hz
- 1kHz: 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Single or split supply: 4V to 44V
Fast settling time
- 340ns to 0.1%
- 400ns to 0.01%
Large output swing: VCC– + 0.1V to VCC+ – 1V

Qualified for automotive applications
Low noise:
- 10Hz: 15nV/√ Hz
- 1kHz: 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Single or split supply: 4V to 44V
Fast settling time
- 340ns to 0.1%
- 400ns to 0.01%
Large output swing: VCC– + 0.1V to VCC+ – 1V

The TLE2142-Q1 device is a high-performance, internally compensated operational amplifier built using the Texas Instruments complementary bipolar Excalibur™ process. The device is a pin-compatible upgrade to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

The TLE2142-Q1 device is a high-performance, internally compensated operational amplifier built using the Texas Instruments complementary bipolar Excalibur™ process. The device is a pin-compatible upgrade to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 3

Top-Dokumentation	Typ	Titel	Format-Optionen
*	Datenblatt	TLE2142-Q1 Excalibur™ Low-Noise High-Speed Precision Operational Amplifier datasheet (Rev. A)	PDF \| HTML	21.07.2025
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017
	Anwendungshinweis	TLE2141 and TLE2141-Q1 EMI Immunity Performance (Rev. B)		01.07.2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Simulationsmodell