TLE2142

AKTIV

Präziser Zweifach-Highspeed-Operationsverstärker, rauscharm, mit JFET-Eingang

Jetzt bestellen

Datenblatt

document-pdfAcrobat Excalibur Low-Noise High-Speed Precision Operational Amplifiers datasheet (Rev. E) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.

OPA2992

AKTIV

40 V, zweifacher 10,6 MHz rauscharmer Operationsverstärker, Rail-to-Rail-Ein- und Ausgang mit gering Rail-to-rail I/O, higher GBW (10.6 MHz), lower offset voltage (1 mV), lower power (2.4 mA), lower noise (7 nV/√Hz), higher output current (65 mA), wider temp range (-40 to 125)

TLE2142

AKTIV

Jetzt bestellen

Produktdetails

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Rail-to-rail

In to V-

GBW (typ) (MHz)

6

Slew rate (typ) (V/µs)

45

Vos (offset voltage at 25°C) (max) (mV)

1.2

Iq per channel (typ) (mA)

3.45

Vn at 1 kHz (typ) (nV√Hz)

10.5

Rating

Catalog

Operating temperature range (°C)

-40 to 105

Offset drift (typ) (µV/°C)

1.7

Features

High Cload Drive

Input bias current (max) (pA)

1500000

CMRR (typ) (dB)

108

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Rail-to-rail

In to V-

GBW (typ) (MHz)

6

Slew rate (typ) (V/µs)

45

Vos (offset voltage at 25°C) (max) (mV)

1.2

Iq per channel (typ) (mA)

3.45

Vn at 1 kHz (typ) (nV√Hz)

10.5

Rating

Catalog

Operating temperature range (°C)

-40 to 105

Offset drift (typ) (µV/°C)

1.7

Features

High Cload Drive

Input bias current (max) (pA)

1500000

CMRR (typ) (dB)

108

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

PDIP (P)

8

92.5083 mm² (9.81 mm × 9.43 mm)

Low noise
- 10Hz . . . 15nV/√ Hz
- 1kHz . . . 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Low VIO: 500µV maximum at 25°C
Single or split supply: 4V to 44V
Fast settling time:
- 340ns to 0.1%
- 400ns to 0.01%
Saturation recovery: 150ns
Large output swing:
- VCC− + 0.1V to VCC+ − 1V

Low noise
- 10Hz . . . 15nV/√ Hz
- 1kHz . . . 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Low VIO: 500µV maximum at 25°C
Single or split supply: 4V to 44V
Fast settling time:
- 340ns to 0.1%
- 400ns to 0.01%
Saturation recovery: 150ns
Large output swing:
- VCC− + 0.1V to VCC+ − 1V

The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing.

Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from −40°C to 105°C, and M-suffix devices over the full military temperature range of −55°C to 125°C.

The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing.

Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from −40°C to 105°C, and M-suffix devices over the full military temperature range of −55°C to 125°C.

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 4

Top-Dokumentation	Typ	Titel	Format-Optionen
*	Datenblatt	Excalibur Low-Noise High-Speed Precision Operational Amplifiers datasheet (Rev. E)	PDF \| HTML	11.07.2025
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28.03.2017
	Anwendungshinweis	TLE2141 and TLE2141-Q1 EMI Immunity Performance (Rev. B)		01.07.2015
	Anwendungshinweis	Bipolar Voltage Outputs for the TLV56xx Family of DACs (Rev. A)		18.05.2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Simulationsmodell