Home Audio, Haptik und Piezo Audioverstärker Audioverstärker für Automobilanwendungen
Home
Audio, Haptik und Piezo
Audioverstärker
Audioverstärker für Automobilanwendungen
NEU

TAS6501-Q1

AKTIV

Class-D-Monokanal-Audioverstärker für Automobilind., mit Digitaleingang + Load-Dump, 2,1 MHz, 15 W

Jetzt bestellen
Datenblatt

TAS6501-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Output power (W) 15 Power stage supply (max) (V) 19 Power stage supply (min) (V) 4.5 Speaker channels (max) Mono Features Low latency, Small Size, real-time load diagnostics, thermal pad down Audio input type Digital Input Control interface I2C THD + N at 1 kHz (%) 0.02 Switching frequency (max) (Hz) 2000000 Output noise voltage (µV) 41 Sampling rate (max) (Hz) 192000 Rating Automotive Operating temperature range (°C) -40 to 125
Output power (W) 15 Power stage supply (max) (V) 19 Power stage supply (min) (V) 4.5 Speaker channels (max) Mono Features Low latency, Small Size, real-time load diagnostics, thermal pad down Audio input type Digital Input Control interface I2C THD + N at 1 kHz (%) 0.02 Switching frequency (max) (Hz) 2000000 Output noise voltage (µV) 41 Sampling rate (max) (Hz) 192000 Rating Automotive Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² (9.7 mm × 6.4 mm) VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5V to 19V supply voltage, 40V load dump
    • Support for 1.8V and 3.3V I/O’s
    • I2C control with 8 address options
    • <0.5W idle power loss at 14.4V, <5uA max PVDD shutdown loss
  • Output current sensing via I2S or TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions while playing audio
    • Open load, Shorted load, Short-to-power, Short-to-ground detection
  • Integrated DSP processing
    • Thermal monitoring and foldback
    • PVDD monitoring and foldback
    • Clip detection
    • Low Latency Path, >70% reduced signal delay at 48kHz
  • DC and AC Standby load diagnostics
  • Audio inputs
    • I2S and TDM support up to TDM16
    • Input sample rates: 16, 32, 44.1, 48, 96, 192kHz
  • Audio outputs
    • 384kHz to 2MHz configurable output switching frequency
    • 15W (14.4V, 4Ω, 10% THD+N)
  • Audio Performance
    • THD+N <0.02% (4Ω, 1W, 1kHz)
    • 105dB SNR
    • Output noise: 41µVRMS at 14.4V, A-weighting
  • Protection
    • Output short protection
    • Speaker GuardTM Pro power limiter
    • Configurable overtemperature warning and shutdown
    • I2C temperature and supply voltage readout
    • DC offset, undervoltage and overvoltage
  • Easily meet CISPR25-L5 EMC specification
    • Advanced spread-spectrum
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5V to 19V supply voltage, 40V load dump
    • Support for 1.8V and 3.3V I/O’s
    • I2C control with 8 address options
    • <0.5W idle power loss at 14.4V, <5uA max PVDD shutdown loss
  • Output current sensing via I2S or TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions while playing audio
    • Open load, Shorted load, Short-to-power, Short-to-ground detection
  • Integrated DSP processing
    • Thermal monitoring and foldback
    • PVDD monitoring and foldback
    • Clip detection
    • Low Latency Path, >70% reduced signal delay at 48kHz
  • DC and AC Standby load diagnostics
  • Audio inputs
    • I2S and TDM support up to TDM16
    • Input sample rates: 16, 32, 44.1, 48, 96, 192kHz
  • Audio outputs
    • 384kHz to 2MHz configurable output switching frequency
    • 15W (14.4V, 4Ω, 10% THD+N)
  • Audio Performance
    • THD+N <0.02% (4Ω, 1W, 1kHz)
    • 105dB SNR
    • Output noise: 41µVRMS at 14.4V, A-weighting
  • Protection
    • Output short protection
    • Speaker GuardTM Pro power limiter
    • Configurable overtemperature warning and shutdown
    • I2C temperature and supply voltage readout
    • DC offset, undervoltage and overvoltage
  • Easily meet CISPR25-L5 EMC specification
    • Advanced spread-spectrum

The TAS6501-Q1 is a mono-channel, digital-input, Class-D audio amplifier that supports 2MHz switching frequency enabling a cost and size-optimized single-channel audio amplifier design. The device operates from 4.5V to 19V and delivers up to 15W (14.4V, 4Ω, 10% THD+N). The device integrates DC and AC load diagnostics to determine the status of the connected load before enabling the output stage. Additionally, the device can monitor the output load condition while in PLAY mode with or without audio using real-time load diagnostics which operates independently from the host and audio input.

TAS6501-Q1 can monitor the output current, PVDD voltage, and temperature of the device and can report this data through TDM or I2S. The integrated DSP of the TAS6501-Q1 enables advanced protection features such as PVDD foldback, thermal foldback, and Speaker Guard™ Pro power limiter. The DSP also enables an additional low-latency signal path, providing up to 70% faster signal processing at 48kHz for time-sensitive Active Noise Cancellation (ANC) and Road Noise Cancellation (RNC) applications.

The device is available in a small pad-down TSSOP and QFN with wettable flanks packages, enabling a heatsink-free audio amplifier design.

The TAS6501-Q1 is a mono-channel, digital-input, Class-D audio amplifier that supports 2MHz switching frequency enabling a cost and size-optimized single-channel audio amplifier design. The device operates from 4.5V to 19V and delivers up to 15W (14.4V, 4Ω, 10% THD+N). The device integrates DC and AC load diagnostics to determine the status of the connected load before enabling the output stage. Additionally, the device can monitor the output load condition while in PLAY mode with or without audio using real-time load diagnostics which operates independently from the host and audio input.

TAS6501-Q1 can monitor the output current, PVDD voltage, and temperature of the device and can report this data through TDM or I2S. The integrated DSP of the TAS6501-Q1 enables advanced protection features such as PVDD foldback, thermal foldback, and Speaker Guard™ Pro power limiter. The DSP also enables an additional low-latency signal path, providing up to 70% faster signal processing at 48kHz for time-sensitive Active Noise Cancellation (ANC) and Road Noise Cancellation (RNC) applications.

The device is available in a small pad-down TSSOP and QFN with wettable flanks packages, enabling a heatsink-free audio amplifier design.

filter Andere Audioverstärker für Automobilanwendungen suchen
Herunterladen Video mit Transkript ansehen Video

Weitere Informationen anfordern

Es sind detailliertere Designressourcen verfügbar. Jetzt anfordern

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TAS6501-Q1 , 15W, 2MHz Digital Input 1-Channel Automotive Heatsink-Free Class-D Audio Amplifier with Current Sense and Real-time Load Diagnostics datasheet PDF | HTML 17.09.2025
Technischer Artikel Advancements in audio technology help humanoids hear and speak in the real world PDF | HTML 17.07.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TAS6501Q1EVM — TAS6501-Q1 – Evaluierungsmodul

Das TAS65x1-Q1 Evaluierungsmodul (EVM) präsentiert alle Funktionen der einkanaligen Klasse-D-Verstärker TAS6511-Q1 und TAS6501-Q1 mit integrierter digitaler Signalverarbeitung (DSP). Die grafische Benutzeroberfläche (GUI) namens PurePath™ Console wird als Schnittstelle zu USB zum EVM verwendet. (...)
Unterstützte Produkte und Hardware
Evaluierungsplatine

TAS6511Q1EVM — TAS6511-Q1 – Evaluierungsmodul

Das Evaluierungsmodul (EVM) TAS6511-Q1 zeigt alle Funktionen des einkanaligen Klasse-D-Verstärkers TAS6511-Q1 mit integriertem DSP. Die grafische Benutzeroberfläche (GUI) PurePath™ Console 3 wird als Schnittstelle per USB zum EVM verwendet. Der EVM verfügt über optische SPDIF-Eingänge, I2S, TDM (...)
Unterstützte Produkte und Hardware
Support-Software

TAS6501-Q1-DESIGN — TAS6501-Q1 technical documentation

TAS6501-Q1 technical documentation
Unterstützte Produkte und Hardware
Support-Software

TAS6511-TAS6501-SW — TAS6511-Q1 and TAS6501-Q1 PPC3 GUI

TAS6511-Q1 and TAS6501-Q1 PPC3 GUI
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 28 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos