Home Audio, Haptik und Piezo Audiowandler Audio-CODECs
Home
Audio, Haptik und Piezo
Audiowandler
Audio-CODECs

TAC5112-Q1

AKTIV

Stereo-Audio-Codec für die Automobilindustrie mit geringem Stromverbrauch, mit 105dB A/D-Wandler mit

Jetzt bestellen
Datenblatt

TAC5112-Q1

AKTIV
Jetzt bestellen

Produktdetails

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface I2S, LJ, TDM Control interface I2C, SPI Analog inputs 2 Analog outputs 2, 4 Features Digital mic support, Headset detect, Low latency, Low power, Mic bias, Phase-locked loop (PLL), PowerTune, Single supply, Stereo headphone amplifier, Thermal Foldback Sampling rate (max) (kHz) 768 Rating Automotive ADC SNR (typ) (dB) 105 DAC SNR (typ) (dB) 114 Operating temperature range (°C) -40 to 125
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface I2S, LJ, TDM Control interface I2C, SPI Analog inputs 2 Analog outputs 2, 4 Features Digital mic support, Headset detect, Low latency, Low power, Mic bias, Phase-locked loop (PLL), PowerTune, Single supply, Stereo headphone amplifier, Thermal Foldback Sampling rate (max) (kHz) 768 Rating Automotive ADC SNR (typ) (dB) 105 DAC SNR (typ) (dB) 114 Operating temperature range (°C) -40 to 125
WQFN (RTV) 32 25 mm² (5 mm × 5 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Stereo low-power audio ADC
    • Performance:
      • Line/Microphone differential input dynamic range: 105dB
      • THD+N: –97dB
      • Channel summing mode supports high SNR: 108dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • Input mix/mux options
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (up to 3V)
    • Up to 4 Record Channels
      • 2 Channel Analog + 2 Channel Digital
      • 1 Channel Analog + 3 Channel Digital
      • 4 Channel Digital
  • Stereo differential or Quad single-ended high performance audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 114dB
      • DAC to differential headphone-out dynamic range: 114dB
      • THD+N:–96dB
    • Line-out/headphone output voltage :
      • Differential, 2VRMS full-scale
      • Pseudo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fS) = 4kHz to 768kHz
  • Common features
    • Analog input to output bypass
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 8mW for 2-Ch recording (1.8V Supply)
      • 10.5mW for 2-Ch playback (1.8V Supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Stereo low-power audio ADC
    • Performance:
      • Line/Microphone differential input dynamic range: 105dB
      • THD+N: –97dB
      • Channel summing mode supports high SNR: 108dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • Input mix/mux options
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (up to 3V)
    • Up to 4 Record Channels
      • 2 Channel Analog + 2 Channel Digital
      • 1 Channel Analog + 3 Channel Digital
      • 4 Channel Digital
  • Stereo differential or Quad single-ended high performance audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 114dB
      • DAC to differential headphone-out dynamic range: 114dB
      • THD+N:–96dB
    • Line-out/headphone output voltage :
      • Differential, 2VRMS full-scale
      • Pseudo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fS) = 4kHz to 768kHz
  • Common features
    • Analog input to output bypass
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 8mW for 2-Ch recording (1.8V Supply)
      • 10.5mW for 2-Ch playback (1.8V Supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V

The TAC5112-Q1 is an automotive, low-power stereo audio codec with 2VRMS differential input, 105dB stereo ADC and 2VRMS differential output, 114dB stereo or 1VRMS single-ended output, 107dB quad DAC. The TAC5112-Q1 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. The TAC5112-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra-low latency filter modes, and allows for sample rates up to 768kHz for both ADC and DAC signal chains. The TAC5112-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5112-Q1 an excellent choice for space-constrained automotive systems.

The TAC5112-Q1 is an automotive, low-power stereo audio codec with 2VRMS differential input, 105dB stereo ADC and 2VRMS differential output, 114dB stereo or 1VRMS single-ended output, 107dB quad DAC. The TAC5112-Q1 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. The TAC5112-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra-low latency filter modes, and allows for sample rates up to 768kHz for both ADC and DAC signal chains. The TAC5112-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5112-Q1 an excellent choice for space-constrained automotive systems.
filter Andere Audio-CODECs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 8
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TAC5112-Q1 Automotive low-power stereo audio codec with 105 dB dynamic range ADC and 114 dB dynamic range DAC datasheet (Rev. A) PDF | HTML 19.03.2025
Anwendungshinweis Input Common-Mode Tolerance Modes for TAx5x1x/ TAx5x1x-Q1 Devices PDF | HTML 30.04.2026
Anwendungshinweis IADC Configuration for Non-Audio Applications PDF | HTML 20.04.2026
Anwendungshinweis Manual Clocking Configuration for the TAx5x1x Family PDF | HTML 26.03.2026
Anwendungshinweis Using the TAC5x1x-Q1 Audio Codec in Automotive Infotainment Systems PDF | HTML 26.02.2026
Anwendungshinweis Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family (Rev. A) PDF | HTML 05.09.2024
Anwendungshinweis Headset Detection for TAx52xx Family PDF | HTML 11.04.2024
Anwendungshinweis Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family PDF | HTML 07.11.2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TAC5112EVM-K — TAC5112 – Evaluierungsmodul

Das TAC5112-Evaluierungsmodul (EVM) ermöglicht es dem Anwender, die Fähigkeiten des TAC5112 zu evaluieren. Der TAD5112 ist ein energieeffizienter Zwei-Kanal-Stereo-Codec, der für Anwendungen in den Bereichen Mobilfunk, IP-Telefonie oder professionelle Audioanwendungen vorgesehen ist. Das EVM wird (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Anwendungssoftware und Frameworks

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console ist eine hochintegrierte und benutzerfreundliche Suite für die Entwicklung von Audioanwendungen, die speziell für die Vereinfachung des mit der Entwicklung von Audioprodukten verbundenen Evaluierungs-, Konfigurations- und Debug-Prozesses entwickelt wurde. Sehen Sie sich an, wie (...)

Unterstützte Produkte und Hardware
Treiber oder Bibliothek

TAC5X1X-LINUX-DRIVER — These Linux drivers support our TAC5x1x family including ADC, DAC and CODEC.

These Linux drivers support our TAC5x1x family including ADC, DAC and CODEC. These drivers include both .c and .h files.
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RTV) 32 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos