Home Motortreiber Treiber für bürstenlose Gleichstrommotoren (BLDC) BLDC-Treiber mit integrierter Steuerung
Home
Motortreiber
Treiber für bürstenlose Gleichstrommotoren (BLDC)
BLDC-Treiber mit integrierter Steuerung

MCT8329A

AKTIV

60-V-Drei-Phasen-BLDC-Gate-Treiber für die sensorlose Trapezsteuerung

Jetzt bestellen
Datenblatt

MCT8329A

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Architecture Gate driver Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 60 Features 120 or 150 degree modulation for improved acoustic performance, Code-free high speed sensorless trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO,OCP,OTW-OTSD,AVS, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 60 Features 120 or 150 degree modulation for improved acoustic performance, Code-free high speed sensorless trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO,OCP,OTW-OTSD,AVS, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
WQFN (REE) 36 20 mm² 4 x 5
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports up to 3 kHz (electrical frequency)
    • Very fast startup time (<50 ms)
    • Fast Deceleration (<150 ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Forward and reverse windmilling support
    • Analog, PWM, freq. or I2C based control input
    • Configurable motor startup and stop options
    • Optional closed loop speed or power control, open loop voltage control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Variable monitoring through DACOUT
  • 65-V Three phase half-bridge gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low power sleep mode
    • 5-µA (maximum) at VPVDD = 24-V, TA = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Supports up to 100-kHz PWM frequency
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports up to 3 kHz (electrical frequency)
    • Very fast startup time (<50 ms)
    • Fast Deceleration (<150 ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Forward and reverse windmilling support
    • Analog, PWM, freq. or I2C based control input
    • Configurable motor startup and stop options
    • Optional closed loop speed or power control, open loop voltage control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Variable monitoring through DACOUT
  • 65-V Three phase half-bridge gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low power sleep mode
    • 5-µA (maximum) at VPVDD = 24-V, TA = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Supports up to 100-kHz PWM frequency
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCT8329A provides a single-chip, code-free sensorless trapezoidal solution for applications requiring high speed operation or very fast startup time for three phase brushless-DC motors. The device provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The gate drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The MCT8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

Sensorless trapezoidal control is highly configurable through register settings in a non-volatile EEPROM (MCT8329A1I) ranging from motor start-up behavior to closed loop operation, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current sensing amplifier supporting single external shunt resistor. The device receives a speed command through a PWM input or analog voltage or variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8329A, intended to protect the device, motor, and system against fault events.

The MCT8329A provides a single-chip, code-free sensorless trapezoidal solution for applications requiring high speed operation or very fast startup time for three phase brushless-DC motors. The device provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The gate drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The MCT8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

Sensorless trapezoidal control is highly configurable through register settings in a non-volatile EEPROM (MCT8329A1I) ranging from motor start-up behavior to closed loop operation, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current sensing amplifier supporting single external shunt resistor. The device receives a speed command through a PWM input or analog voltage or variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8329A, intended to protect the device, motor, and system against fault events.
filter Andere BLDC-Treiber mit integrierter Steuerung suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
MCF8329A AKTIV Dreiphasiger, sensorloser 60-V-BLDC-Gate-Treiber für die feldorientierte Regelung (FOC) FOC version
Ähnliche Funktionalität wie verglichener Baustein
MCT8316A AKTIV 3-phasiger BLDC-Motortreiber, max. 40 V, 8 A Spitzenstrom, sensorlose Trapezregelung Integrated FETs for up to 70 W of power

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 8
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet MCT8329A High Speed Sensorless Trapezoidal Control Three-phase BLDC Gate Driver datasheet PDF | HTML 05 Jan 2023
Application note How to Program I2C for MCx83xx Device Family PDF | HTML 24 Mär 2025
Application note Motor Pre-Startup Tuning for MCx83xx PDF | HTML 24 Mär 2025
Application note MCF83xx and MCT83xx EEPROM Read and Write Procedure PDF | HTML 13 Mär 2025
Technical article Selecting the right level of integration to meet motor design requirements PDF | HTML 04 Jan 2024
Technical article Top 3 ways to reduce audible noise in motion control applications PDF | HTML 21 Dez 2023
Application brief High-Efficiency Sensorless, Code-Free BLDC Motor Drives for Scalable Systems 03 Mai 2023
Certificate MCT8329EVM EU RoHS Declaration of Conformity (DoC) 16 Dez 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

MCT8329EVM — Evaluierungsmodul MCT8329 für dreiphasigen sensorlosen Trapez-BLDC-Gate-Treiber

Der MCT8329 ist ein 4,5-V- bis 60-V-Dreiphasen-BLDC-Gate-Treiber-IC mit codefreier sensorloser Trapezregelung für Motorantriebsanwendungen. Er verfügt über drei Halbbrücken-Gate-Treiber, die jeweils High-Side- und Low-Side-N-Kanal-Leistungs-MOSFETs ansteuern können.

Der Baustein erzeugt die (...)

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
GUI für Evaluierungsmodul (EVM)

MCT8329A-GUI — GUI for the MCT8329EVM

GUI used to evaluate MCT8329A on the MCT8329EVM
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Download-Optionen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (REE) 36 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos