Home Energiemanagement DC/DC-Schaltregler DC/DC-Controller
Home
Energiemanagement
DC/DC-Schaltregler
DC/DC-Controller

LV5144

AKTIV

Synchroner DC/DC-Abwärtsregler, 95 V 

Jetzt bestellen
Datenblatt

LV5144

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 95 Vin (min) (V) 6 Vout (max) (V) 60 Vout (min) (V) 0.8 Control mode Voltage mode Features Adjustable current limit, Enable, Light Load Efficiency, Load Disconnect, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO adjustable Duty cycle (max) (%) 99 Iq (typ) (A) 0.002 Number of phases 1 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 95 Vin (min) (V) 6 Vout (max) (V) 60 Vout (min) (V) 0.8 Control mode Voltage mode Features Adjustable current limit, Enable, Light Load Efficiency, Load Disconnect, Output discharge, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO adjustable Duty cycle (max) (%) 99 Iq (typ) (A) 0.002 Number of phases 1 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
VQFN (RGY) 20 15.75 mm² 4.5 x 3.5
    • Device temperature grade 1: –40°C to +125°C ambient temperature range
  • Versatile synchronous buck DC/DC controller
    • 6-V to 95-V wide input voltage range
    • 125°C maximum junction temperature
    • 0.8-V reference with ±1% feedback accuracy
    • 0.8-V to 60-V adjustable output voltage
    • 45-ns t ON(min) for high V IN / V OUT ratio
    • 145-ns t OFF(min) for low dropout
    • Lossless R DS(on) or shunt current sensing
    • Optimized for CISPR 11 and CISPR 32 Class B EMI requirements
  • 100-kHz to 1-MHz switching frequency
    • SYNC in and SYNC out capability
    • Selectable diode emulation or FPWM
  • 7.5-V gate drivers for standard V TH MOSFETs
    • 14-ns adaptive dead-time control
    • 2.3-A source and 3.5-A sink capability
  • Inherent protection features for robust design
    • Adjustable output voltage soft start
    • Hiccup-mode overcurrent protection
    • Input UVLO with hysteresis
    • VCC and gate-drive UVLO protection
    • Precision enable input and open-drain PGOOD indicator for sequencing and control
    • Thermal shutdown protection with hysteresis
  • 20-pin VQFN package with wettable flanks
    • Device temperature grade 1: –40°C to +125°C ambient temperature range
  • Versatile synchronous buck DC/DC controller
    • 6-V to 95-V wide input voltage range
    • 125°C maximum junction temperature
    • 0.8-V reference with ±1% feedback accuracy
    • 0.8-V to 60-V adjustable output voltage
    • 45-ns t ON(min) for high V IN / V OUT ratio
    • 145-ns t OFF(min) for low dropout
    • Lossless R DS(on) or shunt current sensing
    • Optimized for CISPR 11 and CISPR 32 Class B EMI requirements
  • 100-kHz to 1-MHz switching frequency
    • SYNC in and SYNC out capability
    • Selectable diode emulation or FPWM
  • 7.5-V gate drivers for standard V TH MOSFETs
    • 14-ns adaptive dead-time control
    • 2.3-A source and 3.5-A sink capability
  • Inherent protection features for robust design
    • Adjustable output voltage soft start
    • Hiccup-mode overcurrent protection
    • Input UVLO with hysteresis
    • VCC and gate-drive UVLO protection
    • Precision enable input and open-drain PGOOD indicator for sequencing and control
    • Thermal shutdown protection with hysteresis
  • 20-pin VQFN package with wettable flanks

The LV5144 95-V, synchronous, buck controller regulates from a high input voltage source or from an input rail subject to high-voltage transients, minimizing the need for external surge suppression components. A high-side switch minimum on-time of 45 ns gives large step-down ratios, enabling the direct step-down conversion from a 48-V nominal input to low-voltage rails for reduced system complexity and design cost. The LV5144 continues to operate during input voltage dips as low as 6 V, at nearly 100% duty cycle if needed, making an excellent choice for high-performance industrial controls, robotics, datacom, and RF applications.

Forced-PWM (FPWM) operation eliminates switching frequency variation to minimize EMI, while user-selectable diode emulation lowers current consumption at light-load conditions. The adjustable switching frequency as high as 1 MHz can be synchronized to an external clock source to eliminate beat frequencies in noise-sensitive applications.

The LV5144 95-V, synchronous, buck controller regulates from a high input voltage source or from an input rail subject to high-voltage transients, minimizing the need for external surge suppression components. A high-side switch minimum on-time of 45 ns gives large step-down ratios, enabling the direct step-down conversion from a 48-V nominal input to low-voltage rails for reduced system complexity and design cost. The LV5144 continues to operate during input voltage dips as low as 6 V, at nearly 100% duty cycle if needed, making an excellent choice for high-performance industrial controls, robotics, datacom, and RF applications.

Forced-PWM (FPWM) operation eliminates switching frequency variation to minimize EMI, while user-selectable diode emulation lowers current consumption at light-load conditions. The adjustable switching frequency as high as 1 MHz can be synchronized to an external clock source to eliminate beat frequencies in noise-sensitive applications.
filter Andere DC/DC-Controller suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet LV5144 95-V, Synchronous, BuckDC/DCController With Wide Duty Cycle Range datasheet PDF | HTML 17 Aug 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM5146-Q1-EVM12V — Evaluierungsmodul für synchronen Abwärtsregler

Das Evaluierungsmodul (EVM) mit hoher Dichte LM5146-Q1-EVM12V wurde entwickelt, um die Leistung des hochleistungsfähigen synchronen DC/DC-Abwärtsreglers mit LM5146-Q1, und großem Eingangsspannungsbereich zu demonstrieren. Das Design ist in einem miniaturisierten Gehäuse mit geringer (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RGY) 20 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos