Home Verstärker Operationsverstärker (OpAmps) Hochgeschwindigkeits-Operationsverstärker (Transitfrequenz ≥ 50 MHz)
Home
Verstärker
Operationsverstärker (OpAmps)
Hochgeschwindigkeits-Operationsverstärker (Transitfrequenz ≥ 50 MHz)

LMH6733

AKTIV

Dreifach-Operationsverstärker mit Betrieb an einzelner Stromversorgung, 1,0 GHz

Jetzt bestellen
Datenblatt

LMH6733

AKTIV
Jetzt bestellen

Produktdetails

Architecture Current FB Number of channels 3 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 1000 BW at Acl (MHz) 1000 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3750 Vn at flatband (typ) (nV√Hz) 2.1 Vn at 1 kHz (typ) (nV√Hz) 2.1 Iq per channel (typ) (mA) 6.5 Vos (offset voltage at 25°C) (max) (mV) 2.2 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 55 Input bias current (max) (pA) 19000000 Offset drift (typ) (µV/°C) 30 Iout (typ) (mA) 80 2nd harmonic (dBc) 72 3rd harmonic (dBc) 63 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 3 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 1000 BW at Acl (MHz) 1000 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3750 Vn at flatband (typ) (nV√Hz) 2.1 Vn at 1 kHz (typ) (nV√Hz) 2.1 Iq per channel (typ) (mA) 6.5 Vos (offset voltage at 25°C) (max) (mV) 2.2 Rail-to-rail No Features Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 55 Input bias current (max) (pA) 19000000 Offset drift (typ) (µV/°C) 30 Iout (typ) (mA) 80 2nd harmonic (dBc) 72 3rd harmonic (dBc) 63 Frequency of harmonic distortion measurement (MHz) 10
SSOP (DBQ) 16 29.4 mm² (4.9 mm × 6 mm)
  • Supply Range 3 to 12V Single Supply
  • Supply Range ±1.5V to ±6V Split Supply
  • 1.0 GHz −3 dB Small Signal Bandwidth
    • (AV = +1, VS = ±5V)
  • 650 MHz −3 dB Small Signal Bandwidth
    • (AV = +2, VS = 5V)
  • Low Supply Current (5.5 mA per op Amp, VS = 5V)
  • 2.1 nV/√Hz Input Noise Voltage
  • 3750 V/μs Slew Rate
  • 70 mA Linear Output Current
  • CMIR and Output Swing to 1V from Each Supply Rail

All trademarks are the property of their respective owners.

  • Supply Range 3 to 12V Single Supply
  • Supply Range ±1.5V to ±6V Split Supply
  • 1.0 GHz −3 dB Small Signal Bandwidth
    • (AV = +1, VS = ±5V)
  • 650 MHz −3 dB Small Signal Bandwidth
    • (AV = +2, VS = 5V)
  • Low Supply Current (5.5 mA per op Amp, VS = 5V)
  • 2.1 nV/√Hz Input Noise Voltage
  • 3750 V/μs Slew Rate
  • 70 mA Linear Output Current
  • CMIR and Output Swing to 1V from Each Supply Rail

All trademarks are the property of their respective owners.

The LMH6733 is a triple, wideband, operational amplifier designed specifically for use where high speed and low power are required. Input voltage range and output voltage swing are optimized for operation on supplies as low as 3V and up to ±6V. Benefiting from TI’s current feedback architecture, the LMH6733 offers a gain range of ±1 to ±10 while providing stable operation without external compensation, even at unity gain. These amplifiers provide 650 MHz small signal bandwidth at a gain of 2 V/V , a low 2.1 nV/√Hz input referred noise and only consume 5.5 mA (per amplifier) from a single 5V supply.

The LMH6733 is offered in a 16-Pin SSOP package with flow through pinout for ease of layout and is also pin compatible with the LMH6738. Each amplifier has an individual shutdown pin.

The LMH6733 is a triple, wideband, operational amplifier designed specifically for use where high speed and low power are required. Input voltage range and output voltage swing are optimized for operation on supplies as low as 3V and up to ±6V. Benefiting from TI’s current feedback architecture, the LMH6733 offers a gain range of ±1 to ±10 while providing stable operation without external compensation, even at unity gain. These amplifiers provide 650 MHz small signal bandwidth at a gain of 2 V/V , a low 2.1 nV/√Hz input referred noise and only consume 5.5 mA (per amplifier) from a single 5V supply.

The LMH6733 is offered in a 16-Pin SSOP package with flow through pinout for ease of layout and is also pin compatible with the LMH6738. Each amplifier has an individual shutdown pin.
filter Andere Hochgeschwindigkeits-Operationsverstärker (Transitfrequenz ≥ 50 MHz) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt LMH6733 Single Supply, 1.0 GHz, Triple Operational Amplifier datasheet (Rev. D) 02.05.2013
Technischer Artikel 3 common questions when designing with high-speed amplifiers PDF | HTML 17.07.2020
E-book The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 28.03.2017
Anwendungshinweis AN-1822 LMH6733 High Definition Video Transmission Over CAT5 (Rev. A) 23.04.2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

LMH6733 PSPICE Model

SNOM122.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SSOP (DBQ) 16 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos