Home HF & Mikrowellen HF-Verstärker HF-Verstärker mit variabler Verstärkung (VGAs)
Home
HF & Mikrowellen
HF-Verstärker
HF-Verstärker mit variabler Verstärkung (VGAs)

LMH6521

AKTIV

Hochleistungsfähige Dual-DVGA

Jetzt bestellen
Datenblatt

LMH6521

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

2nd harmonic (dBc) -84 3rd harmonic (dBc) 83 Frequency of harmonic distortion measurement (MHz) 200 Acl, min spec gain (V/V) 0.53 Architecture Fully Differential ADC Driver, VGA BW at Acl (MHz) 1400 Gain (max) (dB) 26 Gain (min) (dB) -5.5 Step size (dB) 0.5 Type RF VGA Iq per channel (typ) (mA) 113 Number of channels 2 Rating Catalog Operating temperature range (°C) -40 to 85 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.75 Vs (min) (V) 4.75 Vs (max) (V) 5.25
2nd harmonic (dBc) -84 3rd harmonic (dBc) 83 Frequency of harmonic distortion measurement (MHz) 200 Acl, min spec gain (V/V) 0.53 Architecture Fully Differential ADC Driver, VGA BW at Acl (MHz) 1400 Gain (max) (dB) 26 Gain (min) (dB) -5.5 Step size (dB) 0.5 Type RF VGA Iq per channel (typ) (mA) 113 Number of channels 2 Rating Catalog Operating temperature range (°C) -40 to 85 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.75 Vs (min) (V) 4.75 Vs (max) (V) 5.25
WQFN (RTV) 32 25 mm² 5 x 5
  • OIP3 of 48.5 dBm at 200 MHz
  • Maximum Voltage Gain of 26 dB
  • Gain Range: 31.5 dB with 0.5-dB Step Size
  • Channel Gain Matching of ±0.04 dB
  • Noise Figure: 7.3 dB at Maximum Gain
  • –3-dB Bandwidth of 1200 MHz
  • Low Power Dissipation
  • Independent Channel Power Down
  • Three Gain Control Modes:
    • Parallel Interface
    • Serial Interface (SPI)
    • Pulse Mode Interface
  • Temperature Range: –40°C to +85°C
  • Thermally-Enhanced, 32-Pin WQFN Package
  • OIP3 of 48.5 dBm at 200 MHz
  • Maximum Voltage Gain of 26 dB
  • Gain Range: 31.5 dB with 0.5-dB Step Size
  • Channel Gain Matching of ±0.04 dB
  • Noise Figure: 7.3 dB at Maximum Gain
  • –3-dB Bandwidth of 1200 MHz
  • Low Power Dissipation
  • Independent Channel Power Down
  • Three Gain Control Modes:
    • Parallel Interface
    • Serial Interface (SPI)
    • Pulse Mode Interface
  • Temperature Range: –40°C to +85°C
  • Thermally-Enhanced, 32-Pin WQFN Package

The LMH6521 contains two high performance, digitally controlled variable gain amplifiers (DVGA).

Both channels of the LMH6521 have an independent, digitally controlled attenuator followed by a high linearity, differential output amplifier. Each block has been optimized for low distortion and maximum system design flexibility. Each channel has a high speed power down mode.

The internal digitally controlled attenuator provides precise 0.5-dB gain steps over a 31.5-dB range. Serial and parallel programming options are provided. Serial mode programming uses the SPI interface. A pulse mode is also offered where simple up or down commands can change the gain one step at a time.

The output amplifier has a differential output allowing 10-VPPD signal swings on a single 5-V supply. The low impedance output provides maximum flexibility when driving filters or analog to digital converters.

The LMH6521 contains two high performance, digitally controlled variable gain amplifiers (DVGA).

Both channels of the LMH6521 have an independent, digitally controlled attenuator followed by a high linearity, differential output amplifier. Each block has been optimized for low distortion and maximum system design flexibility. Each channel has a high speed power down mode.

The internal digitally controlled attenuator provides precise 0.5-dB gain steps over a 31.5-dB range. Serial and parallel programming options are provided. Serial mode programming uses the SPI interface. A pulse mode is also offered where simple up or down commands can change the gain one step at a time.

The output amplifier has a differential output allowing 10-VPPD signal swings on a single 5-V supply. The low impedance output provides maximum flexibility when driving filters or analog to digital converters.
filter Andere HF-Verstärker mit variabler Verstärkung (VGAs) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 12
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet LMH6521 High Performance Dual DVGA datasheet (Rev. E) PDF | HTML 23 Aug 2016
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mär 2017
User guide Using the LMH6521 in DC Coupled Applications Design Guide 08 Jan 2015
Design guide TSW1265 Dual-Wideband RF-to-Digital Receiver Design Guide 03 Sep 2013
Design guide TSW1266 Wideband RF-to-Digital Complex Receiver-Feedback Signal Chain 03 Sep 2013
Application note AN-1719 Noise Figure Analysis Fully Differential Amplifier (Rev. A) 01 Mai 2013
Application note AN-2235 Ckt Brd Design for LMH6517/21/22 & Other H-Sp IF/RF F Amp (Rev. A) 01 Mai 2013
Application note Between the Amplifier and ADC: Managing Filter Loss in Communications Systems (Rev. B) 26 Apr 2013
Application note Drivng HSpeed ADCs w/LMH6521 DVGA for High IF AC-Coupled Apps (Rev. A) 26 Apr 2013
Application note Using High Speed Diff Amp to Drive ADCs (Rev. A) 26 Apr 2013
More literature Featured High Speed Differential Amplifiers 23 Okt 2012
Application note A Walk Along the Signal Path (High-Speed Signal Path) 30 Mär 2005

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TSW1265EVM — Referenzdesign und Evaluierungsplattform für Breitband-Zweifach-Empfänger

The TSW1265EVM is a wideband dual receiver reference design and evaluation platform. The signal chain allows conversion from RF to bits using a dual-channel downconverter mixer, the LMH6521 dual-channel DVGA, and the ADS4249 14-bit 250-MSPS ADC. The TSW1265EVM also includes the LMK04800 dual-PLL (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationsmodell

LMH6521 ADS2009 Spice Model

SNOJ009.ZIP (46 KB) - Spice Model
Herunterladen
Simulationsmodell

LMH6521 PSpice Model

SNOM715.ZIP (68 KB) - PSpice Model
Herunterladen
Simulationsmodell

LMH6521 TINA-TI Reference Design

SNOM321.TSC (286 KB) - TINA-TI Reference Design
Herunterladen
Simulationsmodell

LMH6521 TINA-TI Spice Model

SNOM322.ZIP (8 KB) - TINA-TI Spice Model
Herunterladen
Berechnungstool

RF-CASCADE-CALC-TOOL — TI RF Cascade Calculator

A browser-based RF lineup analysis tool supporting up to 10 stages. Computes gain, NF, OIP3, OIP2, OP1dB, and derived metrics. Features dual-axis Plotly charts, P1dB saturation detection, and export to CSV
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Herunterladen
Referenzdesigns

TIDA-00360 — 700–2.700 MHz, Zweikanal-Empfänger mit 16-Bit-ADC und 100-MHz-IF-Bandbreite – Referenzdesign

The increasing demand on wireless networks to provide faster data links to customers has driven transceiver hardware to increasingly demanding performance with enough bandwidth to support the largest standardized multi-carrier frequency bands (with band aggregation in some cases) and enough (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-00353 — Referenzdesign für die Entzerrungsoptimierung von seriellen JESD204B-Schnittstellen

Employing equalization techniques is an effective way of compensating for channel loss in JESD204B high speed serial interfaces for data converters. This reference design features the ADC16DX370, a dual 16-bit, 370 MSPS analog-to-digital converter (ADC) that utilizes de-emphasis equalization to (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-00074 — Breitbandige HF-Digital-Komplexempfänger-Feedback-Signalkette

This is a wideband complex-receiver reference design and evaluation platform that is ideally suited for use as a feedback receiver for transmitter digital predistortion. The EVM signal chain is ideal for high intermediate-frequency (IF) complex-feedback applications and contains a complex (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-00073 — Dual-Breitband-HF-zu-Digital-Empfänger-Design

The TSW1265EVM is an example design of a wideband RF to digital dual receiver solution capable of digitizing up to 125MHz of spectrum. The system provides a reference on how to use the ADS4249, LMH6521, LMK0480x, and a dual mixer to achieve this.  This reference EVEM coupled with a capture (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RTV) 32 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos