Home Energiemanagement AC/DC-Schaltregler Wechselstrom/Gleichstrom-Wandler
Home
Energiemanagement
AC/DC-Schaltregler
Wechselstrom/Gleichstrom-Wandler

LM25183-Q1

AKTIV

No-Opto-Flyback-Wandler für die Automobilindustrie, 42 V Eingangsspannung, mit integriertem MOSFET,

Jetzt bestellen
Datenblatt

LM25183-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Automotive Topology PSR flyback Switch current limit (typ) (A) 2.5 Iout (max) (A) 2.5 Vin (max) (V) 42 Vin (min) (V) 4.5 Features Enable, Integrated Switch, Light load efficiency, Pre-bias soft start, UVLO adjustable Control mode Peak current mode Switching frequency (min) (kHz) 12 Switching frequency (max) (kHz) 350 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 150 Duty cycle (max) (%) 82
Rating Automotive Topology PSR flyback Switch current limit (typ) (A) 2.5 Iout (max) (A) 2.5 Vin (max) (V) 42 Vin (min) (V) 4.5 Features Enable, Integrated Switch, Light load efficiency, Pre-bias soft start, UVLO adjustable Control mode Peak current mode Switching frequency (min) (kHz) 12 Switching frequency (max) (kHz) 350 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 150 Duty cycle (max) (%) 82
WSON (NGU) 8 16 mm² (4 mm × 4 mm)
  • AEC-Q100-qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient temperature range
  • Functional Safety-Capable
  • Designed for reliable and rugged applications
    • Wide input voltage range of 4.5 V to 42 V
    • Robust solution with only one component crossing the isolation barrier
    • ±1.5% total output regulation accuracy
    • Optional VOUT temperature compensation
    • –40°C to +150°C junction temperature range
  • Integration reduces solution size and cost
    • Integrated 65-V, 0.11-Ω power MOSFET
    • No optocoupler or transformer auxiliary winding required for VOUT regulation
  • High-efficiency PSR flyback operation
    • Quasi-resonant MOSFET turnoff in BCM
    • Single- and multi-output implementations
  • Ultra-low conducted and radiated EMI signatures
    • Soft switching avoids diode reverse recovery
    • Optimized for CISPR 25 Class 5 requirement
  • Create a custom flyback regulator design using WEBENCH Power Designer
  • AEC-Q100-qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient temperature range
  • Functional Safety-Capable
  • Designed for reliable and rugged applications
    • Wide input voltage range of 4.5 V to 42 V
    • Robust solution with only one component crossing the isolation barrier
    • ±1.5% total output regulation accuracy
    • Optional VOUT temperature compensation
    • –40°C to +150°C junction temperature range
  • Integration reduces solution size and cost
    • Integrated 65-V, 0.11-Ω power MOSFET
    • No optocoupler or transformer auxiliary winding required for VOUT regulation
  • High-efficiency PSR flyback operation
    • Quasi-resonant MOSFET turnoff in BCM
    • Single- and multi-output implementations
  • Ultra-low conducted and radiated EMI signatures
    • Soft switching avoids diode reverse recovery
    • Optimized for CISPR 25 Class 5 requirement
  • Create a custom flyback regulator design using WEBENCH Power Designer

The LM25183-Q1 is a primary-side regulated (PSR) flyback converter with high efficiency over a wide input voltage range of 4.5 V to 42 V. The isolated output voltage is sampled from the primary-side flyback voltage. The high level of integration results in a simple, reliable, and high-density design with only one component crossing the isolation barrier. Boundary conduction mode (BCM) switching enables a compact magnetic solution and better than ±1.5% load and line regulation performance. An integrated 65-V power MOSFET provides output power up to 10 W with enhanced headroom for line transients.

The LM25183-Q1 simplifies the implementation of isolated DC/DC supplies with optional features to optimize performance for the target end equipment. The output voltage is set by one resistor, while an optional resistor improves output voltage accuracy by negating the thermal coefficient of the flyback diode voltage drop. Additional features include an internally-fixed or externally-programmable soft-start, precision enable input with hysteresis for adjustable line UVLO, hiccup-mode overload protection, and thermal shutdown protection with automatic recovery.

The LM25183-Q1 converter is qualified to automotive AEC-Q100 grade 1 and is available in 8-pin WSON package with 0.8-mm pin pitch and wettable flanks.

The LM25183-Q1 is a primary-side regulated (PSR) flyback converter with high efficiency over a wide input voltage range of 4.5 V to 42 V. The isolated output voltage is sampled from the primary-side flyback voltage. The high level of integration results in a simple, reliable, and high-density design with only one component crossing the isolation barrier. Boundary conduction mode (BCM) switching enables a compact magnetic solution and better than ±1.5% load and line regulation performance. An integrated 65-V power MOSFET provides output power up to 10 W with enhanced headroom for line transients.

The LM25183-Q1 simplifies the implementation of isolated DC/DC supplies with optional features to optimize performance for the target end equipment. The output voltage is set by one resistor, while an optional resistor improves output voltage accuracy by negating the thermal coefficient of the flyback diode voltage drop. Additional features include an internally-fixed or externally-programmable soft-start, precision enable input with hysteresis for adjustable line UVLO, hiccup-mode overload protection, and thermal shutdown protection with automatic recovery.

The LM25183-Q1 converter is qualified to automotive AEC-Q100 grade 1 and is available in 8-pin WSON package with 0.8-mm pin pitch and wettable flanks.
filter Andere Wechselstrom/Gleichstrom-Wandler suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 10
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt LM25183-Q1 42-VIN PSR Flyback DC/DC Converter with 65-V, 2.5-A MOSFET datasheet (Rev. A) PDF | HTML 22.09.2020
Analog Design Journal Why use PSR‐flyback isolated converters in dual‐battery mHEV systems (Rev. A) PDF | HTML 25.05.2023
Technischer Artikel MHEVs: Optimizing the automotive powertrain for efficiency and cost PDF | HTML 24.05.2021
Anwendungshinweis LM5180 EMI Performance PDF | HTML 04.04.2021
Informationen zur funktionalen Sicherheit LM2518x, LM2518x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and P PDF | HTML 26.08.2020
Technischer Artikel How to raise regulation performance with a stacked-output PSR flyback DC/DC conver PDF | HTML 02.06.2020
Analog Design Journal How an auxless PSR-flyback converter can increase PLC reliability and density 30.09.2019
Whitepaper An overview of radiated EMI specifications for power supplies 05.06.2018
Whitepaper An overview of conducted EMI specifications for power supplies 01.02.2018
Application brief PSR Flyback DC/DC Converter Transformer Design for mHEV Applications 13.11.2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM25184EVM-S12 — Evaluierungsmodul für PSR-Flyback-Wandler mit einem Ausgang, 42 VIN, 1 AOUT

Das LM25184EVM-S12-Evaluierungsmodul (EVM) wurde entwickelt, um die Leistung des PSR-Flyback-Wandlers LM25184-Q1 mit großem Eingangsspannungsbereich zu demonstrieren. Das Design ist in einem miniaturisierten Gehäuse mit geringer Komponentenanzahl erhältlich. Der Baustein arbeitet über einen großen (...)
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

LM25183-Q1 PSpice Transient Model

SNVMBZ3.ZIP (134 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Berechnungstool

LM25183-LM25184DESIGN-CALC — LM25183 and LM25184 Quickstart Design Tool

Welcome to the LM25183 and LM25184 quickstart design tool. This standalone tool facilitates and assists the power-supply engineer with the design of a DC/DC flyback regulator based on the LM25183 and LM25184 PSR flyback converter. As such, the user can expeditiously arrive at an optimized design (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WSON (NGU) 8 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos