The DS125DF1610 is a sixteen-channel multi-rate retimer with integrated signal conditioning features. The device includes a fully adaptive Continuous Time Linear Equalizer (CTLE), Decision Feedback Equalizer (DFE), clock and data recovery (CDR), and a transmit FIR filter to enhance the reach and robustness over long, lossy, crosstalk impaired high speed serial links to achieve BER < 1×10-15.
Each channel of the DS125DF1610 independently locks to serial data at 9.8 to 12.5 Gbps and the divide by 2, 4 and 8 sub-multiples. A simple external oscillator (±100ppm) that is synchronous or asynchronous with the incoming data stream is used as a reference clock. Integrated 4x4 cross point switches allow for full non-blocking routing or broadcasting within each quad of the DS125DF1610.
Programmable transmit FIR filter offers control of the pre-cursor, main tap and post-cursor for transmit equalization. The fully adaptive receive equalization (CTLE and DFE) enables longer distance transmission in lossy copper interconnects and backplanes with multiple connectors.
A non-disruptive mission mode eye-monitor feature allows link monitoring internal to the receiver. The built-in PRBS generator and checker compliment the internal diagnostic features to complete standalone BERT measurements. Built-in JTAG enables manufacturing tests.
| Top-Dokumentation | Typ | Titel | Format-Optionen | Neueste englische Version herunterladen | Datum |
|---|---|---|---|---|---|
| * | Datenblatt | DS125DF1610 9.8 to 12.5 Gbps 16-Channel Retimer datasheet (Rev. B) | PDF | HTML | 13.01.2017 | |
| Anwendungshinweis | Extend reach with Ethernet Redrivers and Retimers for 10G-12.5G Applications (Rev. A) | 31.01.2023 | |||
| Technischer Artikel | Eye doctor: Reflections and how to deal with them in high-speed systems | PDF | HTML | 08.09.2016 | ||
| Analog Design Journal | Green box testing: A method for optimizing high-speed serial links | 21.07.2016 | |||
| Anwendungshinweis | Understanding EEPROM Programming for 10G to 12.5G Retimers | PDF | HTML | 13.01.2016 | ||
| Anwendungshinweis | Selecting TI SigCon Devices for SFF-8431 SFP+ Applications | 06.05.2014 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
The DS125DF1610EVM allows for easy evaluation of the DS125DF1610. Users are required to supply power and high speed traffic to the EVM via the SMA connectors. A low cost on board oscillator provides a reference clock for the DS125DF1610’s PPM counter, so external clocking equipment is not (...)
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| FCBGA (ABB) | 196 | Ultra Librarian |
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.