Produktdetails

Input signal PWM Output voltage (max) (V) 50 Shutdown current (ISD) (µA) 6800 Architecture Class-D, Fully Differential, Single-ended Bandwidth (typ) (MHz) 0.0005 Iq (typ) (mA) 33 Rating Catalog Operating temperature range (°C) 0 to 125
Input signal PWM Output voltage (max) (V) 50 Shutdown current (ISD) (µA) 6800 Architecture Class-D, Fully Differential, Single-ended Bandwidth (typ) (MHz) 0.0005 Iq (typ) (mA) 33 Rating Catalog Operating temperature range (°C) 0 to 125
HTSSOP (DDV) 44 113.4 mm² (14 mm × 8.1 mm)
  • Wide 12V to 48V supply voltage operation
  • Supports up to 50W peak power
  • High-Efficiency Power Stage with 90mΩ Output MOSFETs
  • Power-On Reset for Protection on Power Up Without Any Power-Supply Sequencing
  • Integrated Self-Protection Circuits Including
    • Undervoltage protection
    • Over temperature protection
    • Overload protection
    • Short Circuit protection
  • Available in 44-pin HTSSOP package (DDV)
  • Wide 12V to 48V supply voltage operation
  • Supports up to 50W peak power
  • High-Efficiency Power Stage with 90mΩ Output MOSFETs
  • Power-On Reset for Protection on Power Up Without Any Power-Supply Sequencing
  • Integrated Self-Protection Circuits Including
    • Undervoltage protection
    • Over temperature protection
    • Overload protection
    • Short Circuit protection
  • Available in 44-pin HTSSOP package (DDV)

The DRV2901 is a high-performance lens cleaner transducer driver. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency amplification with proven EMI compliance. This device requires two power supplies, at 12V for GVDD and VDD, and 12V to 48V for PVDD. The DRV2901 does not require power-up sequencing due to an internal power-on reset.

The DRV2901 has an remarkable protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that can damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The DRV2901 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level transients.

The DRV2901 is a high-performance lens cleaner transducer driver. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency amplification with proven EMI compliance. This device requires two power supplies, at 12V for GVDD and VDD, and 12V to 48V for PVDD. The DRV2901 does not require power-up sequencing due to an internal power-on reset.

The DRV2901 has an remarkable protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that can damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The DRV2901 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level transients.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt DRV2901 Single -Channel PWM-input Piezo Transducer Driver for Ultrasonic Cleaning with Wide Supply Voltage datasheet (Rev. A) PDF | HTML 08.07.2025
Zertifikat ULC1001-DRV2911EVM EU Declaration of Conformity (DoC) PDF | HTML 29.09.2023
Technischer Artikel Ultrasonic lens cleaning: A solid-state technology you didn’t know you needed PDF | HTML 16.12.2022
Technischer Artikel What is ultrasonic lens cleaning technology? PDF | HTML 05.05.2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ULC1001-DRV290XEVM — Hardware-Evaluierungs-Bündel aus ULC1001 und DRV2901 zur Ultraschall-Linsenreinigung (ULC)

Das ULC1001-DRV290XEVM ist ein Evaluierungsmodul (EVM), das eine zwei-Chip-Lösung des konfigurierbaren Digitaler Signalprozessor (DSP)-Controllers ULC1001 und des Piezo-Treibers DRV2901 zeigt. Die beiden Komponenten arbeiten zusammen, um Funktionen zur Selbstreinigung mit Funktionen wie (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

ULC-HPB-DEMO — 2-MP-Kamera mit integrierter Ultraschallobjektivreinigung und Mini-Sprühflasche

Die ULC-HPB-DEMO wurde in Zusammenarbeit zwischen Texas Instruments und HPB Optoelectronics als All-in-One-Evaluierungssystem zur Ultraschalobjektivreinigung (Ultrasonic Lens Cleaning, ULC) entwickelt. Die Konstruktion des Demonstrationskits wird von HPB Optoelectronics durchgeführt. Diese Demo, (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (DDV) 44 Ultra Librarian

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos