Home Batteriemanagement-ICs Akkuschutz
Home
Batteriemanagement-ICs
Akkuschutz

BQ77307

AKTIV

Low-Power-Protektor für 2S bis 7S mit hochgenauer Zellenspannungsmessung

Jetzt bestellen
Datenblatt

BQ77307

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Number of series cells (max) 7 Number of series cells (min) 2 Features FET drive, Low-side driver, Open wire (OW), Over-temperature (OT), Overcurrent during charge (OCC), Overcurrent during discharge (OCD), Overvoltage, Short-circuit Discharge (SCD), Under-temperature (UT), Undervoltage Function Protection Operating current (typ) (µA) 6 Vin (max) (V) 38.5 Operating temperature range (°C) -40 to 110 Battery overvoltage protection (min) (V) 0 Battery overvoltage protection (max) (V) 5.5
Rating Catalog Number of series cells (max) 7 Number of series cells (min) 2 Features FET drive, Low-side driver, Open wire (OW), Over-temperature (OT), Overcurrent during charge (OCC), Overcurrent during discharge (OCD), Overvoltage, Short-circuit Discharge (SCD), Under-temperature (UT), Undervoltage Function Protection Operating current (typ) (µA) 6 Vin (max) (V) 38.5 Operating temperature range (°C) -40 to 110 Battery overvoltage protection (min) (V) 0 Battery overvoltage protection (max) (V) 5.5
VQFN (RGR) 20 12.25 mm² 3.5 x 3.5
  • Primary or secondary voltage, current, and temperature protection for 2-series to 7-series cells with an autonomous recovery option
  • Voltage protection:
    • Cell overvoltage (COV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
    • Cell undervoltage (CUV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
  • Current protection:
    • Short circuit in discharge (SCD): 10 mV–500 mV, varying steps
    • Overcurrent in charge (OCC): 3 mV–123 mV, 2-mV steps
    • Overcurrent in discharge 1 and 2 (OCD1 and OCD2): 4 mV–200 mV, 2-mV steps
  • Temperature protection using external NTC thermistor:
    • Overtemperature in charge and discharge (OTC and OTD)
    • Undertemperature in charge and discharge (UTC and UTD)
    • Internal die overtemperature
  • Integrated low-side drivers for NFET protection with an optional autonomous recovery
  • Low power operation:
    • NORMAL mode, both FETs enabled: 8 µA
    • NORMAL mode, FETs disabled: 5 µA
    • SHUTDOWN Mode: < 1 µA
  • High voltage tolerance of 45 V on cell connect and select additional pins
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • Programmable interrupt for host processor, status information available through I 2C
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN 3.5 mm × 3.5 mm × 0.9 mm (RGR) package
  • Primary or secondary voltage, current, and temperature protection for 2-series to 7-series cells with an autonomous recovery option
  • Voltage protection:
    • Cell overvoltage (COV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
    • Cell undervoltage (CUV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
  • Current protection:
    • Short circuit in discharge (SCD): 10 mV–500 mV, varying steps
    • Overcurrent in charge (OCC): 3 mV–123 mV, 2-mV steps
    • Overcurrent in discharge 1 and 2 (OCD1 and OCD2): 4 mV–200 mV, 2-mV steps
  • Temperature protection using external NTC thermistor:
    • Overtemperature in charge and discharge (OTC and OTD)
    • Undertemperature in charge and discharge (UTC and UTD)
    • Internal die overtemperature
  • Integrated low-side drivers for NFET protection with an optional autonomous recovery
  • Low power operation:
    • NORMAL mode, both FETs enabled: 8 µA
    • NORMAL mode, FETs disabled: 5 µA
    • SHUTDOWN Mode: < 1 µA
  • High voltage tolerance of 45 V on cell connect and select additional pins
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • Programmable interrupt for host processor, status information available through I 2C
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN 3.5 mm × 3.5 mm × 0.9 mm (RGR) package

The Texas Instruments BQ77307 family of products features a highly integrated,high-accuracy primary protector for 2-series to 7-series Li-ion, Li-polymer, LiFePO 4 (LFP), and LTO battery packs. Each device includes a high-accuracy voltage, current, and temperature protection subsystem with integrated low-side protection NFET drivers and a programmable LDO for external system use. The BQ77307 provides an interrupt to a host processor and integrates an I 2C host communication interface, supporting up to 400-kHz operation with optional CRC to read status information and program settings. The BQ77307 is available in a 20-pin QFN package.

The Texas Instruments BQ77307 family of products features a highly integrated,high-accuracy primary protector for 2-series to 7-series Li-ion, Li-polymer, LiFePO 4 (LFP), and LTO battery packs. Each device includes a high-accuracy voltage, current, and temperature protection subsystem with integrated low-side protection NFET drivers and a programmable LDO for external system use. The BQ77307 provides an interrupt to a host processor and integrates an I 2C host communication interface, supporting up to 400-kHz operation with optional CRC to read status information and program settings. The BQ77307 is available in a 20-pin QFN package.
filter Andere Akkuschutz suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet BQ77307 2-Series to 7-Series High Accuracy Battery Primary or Secondary Protector for Li-Ion, Li-Polymer, LiFePO4(LFP), and LTO Battery Packs datasheet PDF | HTML 05 Dez 2023
User guide BQ77307 Technical Reference Manual PDF | HTML 06 Dez 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Anwendungssoftware und Frameworks

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – untested version downloads

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Download-Optionen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RGR) 20 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos