2N7001T-Q1

AKTIV

Gepufferter Spannungssignalumsetzer für die Automobilindustrie, 1 Bit, doppelte Spannungsversorgung

Produktdetails

Bits (#) 1 Data rate (max) (Mbps) 100 Topology Push-Pull Direction control (typ) Fixed-direction Vin (min) (V) 1.65 Vin (max) (V) 3.6 Vout (min) (V) 1.65 Vout (max) (V) 3.6 Applications GPIO Features Partial power down (Ioff), Vcc isolation Prop delay (ns) 20 Technology family 2N Supply current (max) (mA) 0.014 Rating Automotive Operating temperature range (°C) -40 to 125
Bits (#) 1 Data rate (max) (Mbps) 100 Topology Push-Pull Direction control (typ) Fixed-direction Vin (min) (V) 1.65 Vin (max) (V) 3.6 Vout (min) (V) 1.65 Vout (max) (V) 3.6 Applications GPIO Features Partial power down (Ioff), Vcc isolation Prop delay (ns) 20 Technology family 2N Supply current (max) (mA) 0.014 Rating Automotive Operating temperature range (°C) -40 to 125
SOT-SC70 (DCK) 5 4.2 mm² (2 mm × 2.1 mm)
  • Up and down translation across 1.65 V to 3.6 V
  • AEC-Q100 automotive qualified
  • Operating temperature grade 1: –40°C to +125°C
  • Maximum quiescent current (ICCA + ICCB) of 14 µA (125°C maximum)
  • Up to 100 Mbps support across the full supply range
  • VCC Isolation Feature
    • If either VCC input is below 100 mV, the output becomes high-impedance
  • Ioff supports partial-power-down mode operation
  • Latch-up performance exceeds 100 mA per JESD 78, Class II
  • ESD protection exceeds JEDEC JS-001
    • 2000-V human body model
    • 1000-V charged-device model
  • Up and down translation across 1.65 V to 3.6 V
  • AEC-Q100 automotive qualified
  • Operating temperature grade 1: –40°C to +125°C
  • Maximum quiescent current (ICCA + ICCB) of 14 µA (125°C maximum)
  • Up to 100 Mbps support across the full supply range
  • VCC Isolation Feature
    • If either VCC input is below 100 mV, the output becomes high-impedance
  • Ioff supports partial-power-down mode operation
  • Latch-up performance exceeds 100 mA per JESD 78, Class II
  • ESD protection exceeds JEDEC JS-001
    • 2000-V human body model
    • 1000-V charged-device model

The AEC-Q100 qualified 2N7001T-Q1 device is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65 V and up to 3.60 V. VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output.

This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.

The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.

The AEC-Q100 qualified 2N7001T-Q1 device is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65 V and up to 3.60 V. VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output.

This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.

The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
TXU0101-Q1 AKTIV Unidirektionaler Einkanal-Pegelumsetzer (Automobilindustrie) Automotive one channel fixed direction level translator with 5-V support

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt 2N7001T-Q1 Single-bit Dual-supply Buffered Voltage Signal Converter datasheet (Rev. A) PDF | HTML 29.07.2020
Anwendungshinweis Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators PDF | HTML 12.07.2024
Anwendungshinweis Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 03.07.2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

2N7001TEVM — 2N7001T Evaluierungsmodul für das unidirektionale Umsetzungsbauteil

Dieses EVM wurde zur Unterstützung des unidirektionalen Umsetzungsbausteins 2N7001T entwickelt. Der 2N7001T arbeitet in einem Eingangsspannungsbereich von 1,8 V bis 3,6 V und hat eine höhere Antriebsstärke von bis zu 12 mA.
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

5-8-LOGIC-EVM — Generisches Logik-Evaluierungsmodul für 5- bis 8-polige DCK-, DCT-, DCU-, DRL- und DBV-Gehäuse

Flexibles EVM zur Unterstützung aller Geräte mit 5- bis 8-poligem DCK-, DCT-, DCU-, DRL- oder DBV-Gehäuse.
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

2N7001T-Q1 IBIS Model

SCEM697.ZIP (42 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-SC70 (DCK) 5 Ultra Librarian

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos