2N7001T

AKTIV

Gepufferter Einbit-Signalwandler mit zwei Stromversorgungen

Jetzt bestellen

Datenblatt

document-pdfAcrobat 2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter datasheet (Rev. C) (Englisch) PDF | HTML

2N7001T

AKTIV

Jetzt bestellen

Produktdetails

Bits (#)

1

Data rate (max) (Mbps)

100

Topology

Push-Pull

Direction control (typ)

Fixed-direction

Vin (min) (V)

1.65

Vin (max) (V)

3.6

Vout (min) (V)

1.65

Vout (max) (V)

3.6

Applications

GPIO

Features

Partial power down (Ioff), Vcc isolation

Prop delay (ns)

20

Technology family

2N

Supply current (max) (mA)

0.014

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Bits (#)

1

Data rate (max) (Mbps)

100

Topology

Push-Pull

Direction control (typ)

Fixed-direction

Vin (min) (V)

1.65

Vin (max) (V)

3.6

Vout (min) (V)

1.65

Vout (max) (V)

3.6

Applications

GPIO

Features

Partial power down (Ioff), Vcc isolation

Prop delay (ns)

20

Technology family

2N

Supply current (max) (mA)

0.014

Rating

Catalog

Operating temperature range (°C)

-40 to 125

X2SON (DPW)

5

0.64 mm² (0.8 mm × 0.8 mm)

SOT-SC70 (DCK)

5

4.2 mm² (2 mm × 2.1 mm)

Up and down translation across 1.65V to 3.6V
Operating temperature: –40°C to +125°C
Maximum quiescent current (ICCA + ICCB) of 14µA (125°C maximum)
Up to 100Mbps support across the full supply range
VCC isolation feature
- If either VCC input is below 100mV, the output becomes high-impedance
Ioff supports partial-power-down mode operation
Latch-up performance exceeds 100mA per JESD 78, Class II
ESD protection exceeds JESD 22
- 2000V Human body model
- 1000V Charged-device model

Up and down translation across 1.65V to 3.6V
Operating temperature: –40°C to +125°C
Maximum quiescent current (ICCA + ICCB) of 14µA (125°C maximum)
Up to 100Mbps support across the full supply range
VCC isolation feature
- If either VCC input is below 100mV, the output becomes high-impedance
Ioff supports partial-power-down mode operation
Latch-up performance exceeds 100mA per JESD 78, Class II
ESD protection exceeds JESD 22
- 2000V Human body model
- 1000V Charged-device model

The 2N7001T is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65V and up to 3.60V. VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output.

This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.

The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.

The 2N7001T is a single-bit buffered voltage signal converter that uses two separate configurable power-supply rails to up or down translate a unidirectional signal. The device is operational with both VCCA and VCCB supplies down to 1.65V and up to 3.60V. VCCA defines the input threshold voltage on the A input. VCCB defines the output drive voltage on the B output.

This device is fully specified for partial-power-down applications using the Ioff current. The Ioff protection circuitry ensures that no excessive current is drawn from or to an input, output, or combined I/O that is biased to a specific voltage while the device is powered down.

The VCC isolation feature ensures that if either VCCA or VCCB is less than 100 mV, the output port (B) enters a high-impedance state.

filter

Andere Spannungsumsetzer suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 10

Top-Dokumentation	Typ	Titel	Format-Optionen
*	Datenblatt	2N7001T Single-Bit Dual-Supply Buffered Voltage Signal Converter datasheet (Rev. C)	PDF \| HTML	01.05.2024
	Anwendungshinweis	Schematic Checklist - A Guide to Designing With Fixed or Direction Control Translators	PDF \| HTML	02.10.2024
	Anwendungshinweis	Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators	PDF \| HTML	12.07.2024
	Anwendungshinweis	Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A)	PDF \| HTML	03.07.2024
	Auswahlhilfe	Voltage Translation Buying Guide (Rev. A)		15.04.2021
	Anwendungshinweis	2N7001T Voltage Level Translator for SPI, UART, JTAG Interface (Rev. A)	PDF \| HTML	29.03.2021
	Technischer Artikel	How smart thermostats get their degrees	PDF \| HTML	09.03.2020
	Technischer Artikel	What’s with chirping smoke detectors?	PDF \| HTML	06.03.2019
	Anwendungshinweis	Common Risks of Discrete FET Voltage Translation and Advantages of TI’s Integrat (Rev. A)		26.06.2018
	Anwendungshinweis	Designing and Manufacturing with TI's X2SON Packages		23.08.2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

2N7001TEVM — 2N7001T Evaluierungsmodul für das unidirektionale Umsetzungsbauteil

Dieses EVM wurde zur Unterstützung des unidirektionalen Umsetzungsbausteins 2N7001T entwickelt. Der 2N7001T arbeitet in einem Eingangsspannungsbereich von 1,8 V bis 3,6 V und hat eine höhere Antriebsstärke von bis zu 12 mA.

Benutzerhandbuch: PDF

Unterstützte Produkte und Hardware

Vorrätig

Limit:

Zum Bestellen bitte anmelden

lock

Melden Sie sich an, um den Lagerbestand einzusehen

??asset.out-of-stock-ti_de_DE??

Nicht verfügbar

Evaluierungsplatine