主页 接口 I2C & I3C ICs I2C 通用 I/O (GPIO)
主页
接口
I2C & I3C ICs
I2C 通用 I/O (GPIO)

LM8327

正在供货

移动 I/O 配套支持 Keyscan、I/O 扩展、PWM 和 ACCESS.bus 主机接口

立即订购
数据表

LM8327

正在供货
数据表 立即订购

产品详情

Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 1.98 Rating Catalog Operating temperature range (°C) -40 to 85
Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 1.98 Rating Catalog Operating temperature range (°C) -40 to 85
CS-BGA (NYB) 36 12.25 mm² 3.5 x 3.5
  • Internal RC Oscillator, no External Clock Required
  • Internal PWM Clock Generation, no External Clock Required
  • Programmable I2C-compatible ACCESS.Bus Address (Default 0x8A)
  • Support for Keypad Matrices of up to of 8 x 12 Keys, Plus 8 Special Function (SF) Keys, for a Full 104 Key Support
  • Support for up to 26 Direct Connect Keys
  • I2C-Compatible ACCESS.Bus Slave Interface at 100 kHz (Standard-Mode) and 400 kHz (Fast-Mode)
  • Three Host-Programmable PWM Outputs for Smooth LED Brightness Modulation
  • Supports General-Purpose I/O Expansion on Pins not Otherwise Used for Keypad or PWM Output
  • 15-byte Key Event Buffer
  • Multiple Key Event Storage
  • Key Events, Errors, and Dedicated Hardware Interrupts Request Host Service by Asserting an IRQ Output
  • Automatic HALT Mode for Low Power Operation
  • Wake-Up from HALT Mode on any Interface (Rising Edge, Falling Edge or Pulse)
  • Three PWM Outputs with Dedicated Script Buffer for up to 32 Commands
  • Register-Based Command Interpreter with Auto-Increment Address

Features, Host-Controlled

  • PWM Scripting for Three PWM Outputs
  • Period of Inactivity that Triggers Entry into HALT Mode
  • Debounce Time for Reliable Key Event Polling
  • Configuration of General Purpose I/O Ports
  • Various Initialization Options (Keypad Size, etc.)

Features, Key Device

  • 1.8V ± 10% Single-Supply Operation
  • On-Chip Power-On Reset (POR)
  • ESD Glitch Filter on RESETN Pin
  • Watchdog Timer
  • Dedicated Slow Clock Input for 32 kHz up to 8MHz
  • −40°C to +85°C Temperature Range
  • 36-pin csBGA Package

All trademarks are the property of their respective owners.

  • Internal RC Oscillator, no External Clock Required
  • Internal PWM Clock Generation, no External Clock Required
  • Programmable I2C-compatible ACCESS.Bus Address (Default 0x8A)
  • Support for Keypad Matrices of up to of 8 x 12 Keys, Plus 8 Special Function (SF) Keys, for a Full 104 Key Support
  • Support for up to 26 Direct Connect Keys
  • I2C-Compatible ACCESS.Bus Slave Interface at 100 kHz (Standard-Mode) and 400 kHz (Fast-Mode)
  • Three Host-Programmable PWM Outputs for Smooth LED Brightness Modulation
  • Supports General-Purpose I/O Expansion on Pins not Otherwise Used for Keypad or PWM Output
  • 15-byte Key Event Buffer
  • Multiple Key Event Storage
  • Key Events, Errors, and Dedicated Hardware Interrupts Request Host Service by Asserting an IRQ Output
  • Automatic HALT Mode for Low Power Operation
  • Wake-Up from HALT Mode on any Interface (Rising Edge, Falling Edge or Pulse)
  • Three PWM Outputs with Dedicated Script Buffer for up to 32 Commands
  • Register-Based Command Interpreter with Auto-Increment Address

Features, Host-Controlled

  • PWM Scripting for Three PWM Outputs
  • Period of Inactivity that Triggers Entry into HALT Mode
  • Debounce Time for Reliable Key Event Polling
  • Configuration of General Purpose I/O Ports
  • Various Initialization Options (Keypad Size, etc.)

Features, Key Device

  • 1.8V ± 10% Single-Supply Operation
  • On-Chip Power-On Reset (POR)
  • ESD Glitch Filter on RESETN Pin
  • Watchdog Timer
  • Dedicated Slow Clock Input for 32 kHz up to 8MHz
  • −40°C to +85°C Temperature Range
  • 36-pin csBGA Package

All trademarks are the property of their respective owners.

The LM8327 GenI/O-Expander and Keypad Controller is a dedicated device to unburden a host processor from scanning a matrix-addressed keypad and to provide flexible and general purpose, host-programmable input/output functions. Three independent PWM timer outputs are provided for dynamic LED brightness modulation.

It communicates with a host processor through an I2C-compatible ACCESS.bus serial interface. It can communicate in Standard (100 kHz) and Fast-Mode (400 kHz) in slave Mode only.

All available input/output pins can alternately be used as a direct key input connection, an input or an output in a keypad matrix, or as a host-programmable general purpose input or output.

Any pin programmed as an input can also sense hardware interrupts. The interrupt polarity (“high-to-low” or “low-to-high” transition) is thereby programmable.

The LM8327 follows a predefined register based set of commands. Upon startup (power on) a configuration file must be sent from the host to setup the hardware of the device.

The LM8327 GenI/O-Expander and Keypad Controller is a dedicated device to unburden a host processor from scanning a matrix-addressed keypad and to provide flexible and general purpose, host-programmable input/output functions. Three independent PWM timer outputs are provided for dynamic LED brightness modulation.

It communicates with a host processor through an I2C-compatible ACCESS.bus serial interface. It can communicate in Standard (100 kHz) and Fast-Mode (400 kHz) in slave Mode only.

All available input/output pins can alternately be used as a direct key input connection, an input or an output in a keypad matrix, or as a host-programmable general purpose input or output.

Any pin programmed as an input can also sense hardware interrupts. The interrupt polarity (“high-to-low” or “low-to-high” transition) is thereby programmable.

The LM8327 follows a predefined register based set of commands. Upon startup (power on) a configuration file must be sent from the host to setup the hardware of the device.
open-in-new 查找其他 I2C 通用 I/O (GPIO)
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 4
类型 标题 下载最新的英语版本 日期
* 数据表 LM8327 Mobile I/O Companion Supporting Keyscan, I/O Expansion, PWM, & ACCESS.bus 数据表 (Rev. A) 2013年 5月 2日
应用手册 Understanding the I2C Bus PDF | HTML 2015年 6月 30日
应用手册 Maximum Clock Frequency of I2C Bus Using Repeaters 2015年 5月 15日
应用手册 I2C Bus Pull-Up Resistor Calculation PDF | HTML 2015年 2月 13日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
模拟工具

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表 

需要 HSpice (...)

用户指南: PDF
英语版 (Rev.A): PDF
查看选项
封装 引脚 下载
CS-BGA (NYB) 36 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频