产品详细信息

Iout (Max) (A) 1 Vin (Min) (V) 2.4 Vin (Max) (V) 5.5 Vout (Min) (V) 0.6 Vout (Max) (V) 4 Soft start Fixed Features EMI Tested, Enable, Output Discharge, Overcurrent protection, Power Good Operating temperature range (C) -40 to 125 Iq (Typ) (uA) 4 Regulated outputs (#) 1 Switching frequency (Max) (kHz) 4000 Switching frequency (Min) (kHz) 4000 Duty cycle (Max) (%) 100 Topology Buck, Synchronous Buck
Iout (Max) (A) 1 Vin (Min) (V) 2.4 Vin (Max) (V) 5.5 Vout (Min) (V) 0.6 Vout (Max) (V) 4 Soft start Fixed Features EMI Tested, Enable, Output Discharge, Overcurrent protection, Power Good Operating temperature range (C) -40 to 125 Iq (Typ) (uA) 4 Regulated outputs (#) 1 Switching frequency (Max) (kHz) 4000 Switching frequency (Min) (kHz) 4000 Duty cycle (Max) (%) 100 Topology Buck, Synchronous Buck
uSiP (SIL) 10
  • 1.1-mm profile MicroSiP™ power module

  • CISPR 11 class B compliant
  • Up to 95% efficiency
  • 2.4-V to 5.5-V input voltage range
  • 0.6-V to 4-V adjustable output voltage
  • Fixed output voltages available: 1.2-V, 1.8-V, 2.5-V and 3.3-V
  • 4-µA operating quiescent current
  • DCS-control topology
  • Power save mode option available for light load efficiency
  • Forced-PWM option available for CCM operation

  • 100% duty cycle for lowest dropout
  • Hiccup short circuit protection
  • Output discharge
  • Power good output with window comparator
  • Integrated soft start-up
  • Overtemperature protection
  • PSPICE models available for: TPSM82821, TPSM82822 and TPSM82823
  • 2.0-mm × 2.5-mm × 1.1-mm 10-pin µSiL package
  • 12 mm2 total solution size (for the fixed output voltage versions)
  • 1.1-mm profile MicroSiP™ power module

  • CISPR 11 class B compliant
  • Up to 95% efficiency
  • 2.4-V to 5.5-V input voltage range
  • 0.6-V to 4-V adjustable output voltage
  • Fixed output voltages available: 1.2-V, 1.8-V, 2.5-V and 3.3-V
  • 4-µA operating quiescent current
  • DCS-control topology
  • Power save mode option available for light load efficiency
  • Forced-PWM option available for CCM operation

  • 100% duty cycle for lowest dropout
  • Hiccup short circuit protection
  • Output discharge
  • Power good output with window comparator
  • Integrated soft start-up
  • Overtemperature protection
  • PSPICE models available for: TPSM82821, TPSM82822 and TPSM82823
  • 2.0-mm × 2.5-mm × 1.1-mm 10-pin µSiL package
  • 12 mm2 total solution size (for the fixed output voltage versions)

The TPSM8282x device family consists of a 1-A, 2-A, and 3-A step-down converter MicroSiP™ power modules optimized for small solution size and high efficiency.

The power modules integrate a synchronous step-down converter and an inductor to simplify design, reduce external components and save PCB area. The TPSM8282x is available in two flavors. The first includes an automatically entered power save mode to maintain high efficiency down to very light loads for extending the system battery run-time. The second version, the TPSM8282xA, runs in forced-PWM maintaining a continuous conduction mode at all currents to minimize the output ripple. In PWM mode the converter operates with a nominal switching frequency of 4MHz.

In power save mode, the device operates with typically 4-µA quiescent current. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation. The EN and PG pins, which support sequencing configurations, bring a flexible system design. An integrated soft start-up reduces the inrush current required from the input supply. Overtemperature protection and hiccup short circuit protection deliver a robust and reliable solution.

The TPSM8282x device family consists of a 1-A, 2-A, and 3-A step-down converter MicroSiP™ power modules optimized for small solution size and high efficiency.

The power modules integrate a synchronous step-down converter and an inductor to simplify design, reduce external components and save PCB area. The TPSM8282x is available in two flavors. The first includes an automatically entered power save mode to maintain high efficiency down to very light loads for extending the system battery run-time. The second version, the TPSM8282xA, runs in forced-PWM maintaining a continuous conduction mode at all currents to minimize the output ripple. In PWM mode the converter operates with a nominal switching frequency of 4MHz.

In power save mode, the device operates with typically 4-µA quiescent current. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation. The EN and PG pins, which support sequencing configurations, bring a flexible system design. An integrated soft start-up reduces the inrush current required from the input supply. Overtemperature protection and hiccup short circuit protection deliver a robust and reliable solution.

下载

技术文档

star = TI 精选相关文档
未找到结果。请清除搜索,并重试。
显示全部 3 项
类型 标题 下载最新的英文版本 日期
* 数据表 TPSM8282x, TPSM8282xA 1-A, 2-A, and 3-A High Efficiency Step-Down Converter MicroSiP™ Power Module with Integrated Inductor 数据表 (Rev. F) 2021年 11月 22日
证书 TPSM82821AEVM-127 EU RoHS Declaration of Conformity (DoC) 2021年 11月 16日
用户指南 Design Summary for MicroSiP™-Enabled TPS8267xSiP (Rev. A) 2021年 6月 16日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

仿真工具

PSPICE-FOR-TI — PSPICE® for TI design and simulation tool

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 引脚 下载
uSiP (SIL) 10 了解详情

订购与质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/FIT 估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品的参数、评估模块或参考设计可能与此 TI 产品相关

支持与培训

视频