产品详细信息

Vin (Min) (V) 4.5 Vin (Max) (V) 17 Vout (Min) (V) 0.25 Vout (Max) (V) 5.5 Iout (Max) (A) 765 Iq (Typ) (uA) 50000 Switching frequency (Min) (kHz) 300 Switching frequency (Max) (kHz) 1500 Features Adjustable Current Limit, Dynamic Voltage Scaling, Enable, Frequency Synchronization, I2C, Light Load Efficiency, Multiple Outputs, PMBus, Phase Interleaving, Power Good, Pre-Bias Start-Up, Remote Sense, SVID, Synchronous Rectification, UVLO Adjustable, Voltage Margining Operating temperature range (C) -40 to 125 Regulated outputs (#) 2 Number of phases 8 Rating Catalog
Vin (Min) (V) 4.5 Vin (Max) (V) 17 Vout (Min) (V) 0.25 Vout (Max) (V) 5.5 Iout (Max) (A) 765 Iq (Typ) (uA) 50000 Switching frequency (Min) (kHz) 300 Switching frequency (Max) (kHz) 1500 Features Adjustable Current Limit, Dynamic Voltage Scaling, Enable, Frequency Synchronization, I2C, Light Load Efficiency, Multiple Outputs, PMBus, Phase Interleaving, Power Good, Pre-Bias Start-Up, Remote Sense, SVID, Synchronous Rectification, UVLO Adjustable, Voltage Margining Operating temperature range (C) -40 to 125 Regulated outputs (#) 2 Number of phases 8 Rating Catalog
WQFN (RSB) 40 25 mm² 5 x 5
  • Input voltage range: 4.5 V to 17 V
  • Output voltage range: 0.25 V to 5.5 V
  • Dual output supporting N+M phase configurations (N+M ≤ 8, M ≤ 4)
  • Intel VR14 SVID compliant with PSYS support
  • Backward compatible to VR13.HC/VR13.0 SVID
  • Automatic NVM fault status logging
  • Dynamic current limit for improved Fast-Vmode performance
  • Fully compatible with TI NexFET™ power stage for high-density solutions
  • Enhanced D-CAP+ control to provider superior transient performance with excellent dynamic current sharing
  • Dynamic phase shedding with programmable thresholds for optimizing efficiency at light and heavy loads
  • Configurable with non-volatile memory (NVM) for low external component count
  • Accurate, adjustable, adaptive voltage positioning (AVP, load line) support
  • Individual per-phase IMON calibration, with multi-slope gain calibration to increase system accuracy.
  • Fast phase-adding for transient undershoot reduction
  • Diode braking with programmable timeout for reduced transient overshoot
  • Patented AutoBalance™ current sharing
  • Programmable per-phase valley current limit (OCL)
  • PMBus™ v1.3.1 system interface for telemetry of voltage, current, power, temperature, and fault conditions
  • Programmable loop compensation through PMBus
  • Driverless configuration for efficient high- frequency switching
  • 5.00 mm × 5.00 mm, 40-pin, QFN package
  • Input voltage range: 4.5 V to 17 V
  • Output voltage range: 0.25 V to 5.5 V
  • Dual output supporting N+M phase configurations (N+M ≤ 8, M ≤ 4)
  • Intel VR14 SVID compliant with PSYS support
  • Backward compatible to VR13.HC/VR13.0 SVID
  • Automatic NVM fault status logging
  • Dynamic current limit for improved Fast-Vmode performance
  • Fully compatible with TI NexFET™ power stage for high-density solutions
  • Enhanced D-CAP+ control to provider superior transient performance with excellent dynamic current sharing
  • Dynamic phase shedding with programmable thresholds for optimizing efficiency at light and heavy loads
  • Configurable with non-volatile memory (NVM) for low external component count
  • Accurate, adjustable, adaptive voltage positioning (AVP, load line) support
  • Individual per-phase IMON calibration, with multi-slope gain calibration to increase system accuracy.
  • Fast phase-adding for transient undershoot reduction
  • Diode braking with programmable timeout for reduced transient overshoot
  • Patented AutoBalance™ current sharing
  • Programmable per-phase valley current limit (OCL)
  • PMBus™ v1.3.1 system interface for telemetry of voltage, current, power, temperature, and fault conditions
  • Programmable loop compensation through PMBus
  • Driverless configuration for efficient high- frequency switching
  • 5.00 mm × 5.00 mm, 40-pin, QFN package

The TPS53689 is a VR14 SVID compliant step down controller with two channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET™ power stages. Advanced control features such as the D-CAP+ architecture with undershoot reduction (USR) and overshoot reduction (OSR) provide fast transient response, low output capacitance, and good dynamic current sharing. The device also provides novel phase interleaving strategy and dynamic phase shedding for efficiency improvement at different loads. Adjustable control of output voltage slew rate and adaptive voltage positioning are natively supported. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the host system. All programmable parameters can be configured through the PMBus interface and can be stored in NVM as the new default values, to minimize the external component count.

The TPS53689 device is offered in a thermally enhanced 40-pin QFN packaged and is rated to operate from –40°C to 125°C.

The TPS53689 is a VR14 SVID compliant step down controller with two channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET™ power stages. Advanced control features such as the D-CAP+ architecture with undershoot reduction (USR) and overshoot reduction (OSR) provide fast transient response, low output capacitance, and good dynamic current sharing. The device also provides novel phase interleaving strategy and dynamic phase shedding for efficiency improvement at different loads. Adjustable control of output voltage slew rate and adaptive voltage positioning are natively supported. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the host system. All programmable parameters can be configured through the PMBus interface and can be stored in NVM as the new default values, to minimize the external component count.

The TPS53689 device is offered in a thermally enhanced 40-pin QFN packaged and is rated to operate from –40°C to 125°C.

下载
Information

申请更多信息

可提供完整数据表。立即申请 

您可能感兴趣的类似产品

open-in-new 产品比较
功能与比较器件相同但引脚有所不同。
TPS53688 正在供货 Dual-channel, 8-phase step-down, digital multiphase D-CAP+™ controller with VR13.HC SVID and PMBus VR13.HC supporting version of the TPS53689
TPS536C9 预发布 具有 VR14 SVID 和 PMBus 的双通道十二相降压数字多相 D-CAP+™ 控制器 12-phase version of the TPS53689

技术文档

star = TI 精选相关文档
未找到结果。请清除搜索,并重试。
显示全部 1 项
类型 标题 下载最新的英文版本 日期
* 数据表 TPS53689 Dual-channel (N + M ≤ 8 phase) D-CAP+™, Step-down, Multiphase Controller with PMBus and VR14 SVID Interfaces 数据表 2021年 6月 3日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

仿真工具

PSPICE-FOR-TI — PSPICE® for TI design and simulation tool

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中,您可以搜索 TI 器件、了解产品系列、打开测试台并对您的设计进行仿真,从而进一步分析选定的器件。您还可对多个 TI 器件进行联合仿真,以更好地展现您的系统。

除了一个完整的预加载模型库之外,您还可以在 PSPICE-FOR-TI 工具中轻松访问 TI 器件的全新技术资料。在您确认找到适合您应用的器件后,可访问 TI store 购买产品。 

借助 PSpice for TI,您可使用合适的工具来满足您在整个设计周期(从电路探索到设计开发和验证)的仿真需求。免费获取、轻松入门。立即下载 PSpice 设计和仿真套件,开始您的设计。

入门

  1. 申请使用 PSPICE-FOR-TI 仿真器
  2. 下载并安装
  3. 观看有关仿真入门的培训
封装 引脚 下载
WQFN (RSB) 40 了解详情

订购与质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/FIT 估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品的参数、评估模块或参考设计可能与此 TI 产品相关

支持与培训

视频