产品详细信息

Number of full bridges 2 Vs (Min) (V) 1.65 Vs ABS (Max) (V) 12 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mOhms) 800 Sleep current (uA) 0.04 Control mode PWM Features Current Regulation Rating Catalog Operating temperature range (C) -40 to 125
Number of full bridges 2 Vs (Min) (V) 1.65 Vs ABS (Max) (V) 12 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mOhms) 800 Sleep current (uA) 0.04 Control mode PWM Features Current Regulation Rating Catalog Operating temperature range (C) -40 to 125
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • Dual H-bridge motor driver, can drive -
    • One bipolar stepper motor
    • One or two brushed DC motors
    • Solenoids and other inductive loads

  • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C)
  • Wide Power Supply Voltage Range
    • 1.65 to 11 V
  • Pin-to-pin compatible with -

  • High output current capability: 2.5-A Peak
  • PWM control interface

  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current regulation
  • Low-power sleep mode
    • ≤ 30 nA at VVM = 5 V, TJ = 25°C
  • Small package and footprint

    • 16-pin HTSSOP with PowerPAD™, 5.0×4.4 mm

    • 16-Pin WQFN with PowerPAD™, 3.0×3.0 mm

  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault Indication Pin (nFAULT)

  • Dual H-bridge motor driver, can drive -
    • One bipolar stepper motor
    • One or two brushed DC motors
    • Solenoids and other inductive loads

  • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C)
  • Wide Power Supply Voltage Range
    • 1.65 to 11 V
  • Pin-to-pin compatible with -

  • High output current capability: 2.5-A Peak
  • PWM control interface

  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current regulation
  • Low-power sleep mode
    • ≤ 30 nA at VVM = 5 V, TJ = 25°C
  • Small package and footprint

    • 16-pin HTSSOP with PowerPAD™, 5.0×4.4 mm

    • 16-Pin WQFN with PowerPAD™, 3.0×3.0 mm

  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault Indication Pin (nFAULT)

The DRV8410 is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation. The inputs and outputs can be paralleled to drive high current brush DC motors with half the RDS(ON).

The device implements current regulation by comparing an internal refernce voltage to the voltage on the xISEN pins, which is proportional to motor current through an external sense resistor. The ability to limit current can significantly reduce large currents during motor startup and stall conditions.

A low-power sleep mode achieves ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features include undervoltage, overcurrent, and overtemperature.

The DRV8410 is part of a family of devices which come in pin-to-pin, scalable RDS(ON) options to support various loads with minimal design changes. See Section 5 for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.

The DRV8410 is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation. The inputs and outputs can be paralleled to drive high current brush DC motors with half the RDS(ON).

The device implements current regulation by comparing an internal refernce voltage to the voltage on the xISEN pins, which is proportional to motor current through an external sense resistor. The ability to limit current can significantly reduce large currents during motor startup and stall conditions.

A low-power sleep mode achieves ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features include undervoltage, overcurrent, and overtemperature.

The DRV8410 is part of a family of devices which come in pin-to-pin, scalable RDS(ON) options to support various loads with minimal design changes. See Section 5 for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.

下载

您可能感兴趣的相似产品

open-in-new 比较产品
功能与比较器件相同且具有相同引脚。
NEW DRV8411 预发布 具有电流调节功能的 1.65V 至 11V、4A、双 H 桥电机驱动器

Lower Rdson and higher output current

技术文档

star = 有关此产品的 TI 精选热门文档
未找到结果。请清除搜索,并重试。
查看全部 8
类型 项目标题 下载最新的英语版本 日期
* 数据表 DRV8410 Dual H-Bridge Motor Driver with Current Regulation 数据表 PDF | HTML 22 Jul 2021
证书 DRV8410EVM EU RoHS Declaration of Conformity (DoC) 19 Aug 2022
用户指南 DRV8410 EVM User's Guide PDF | HTML 02 Feb 2022
技术文章 Drive unipolar stepper motors as bipolar stepper motors with a simple wiring reconfiguration 09 Apr 2020
技术文章 How stepper motors improve noise and efficiency in automotive system design 19 Nov 2019
技术文章 Getting smart about tuning your stepper motor 23 Aug 2018
技术文章 The story of motor-drive integration 09 Jan 2017
应用手册 所选封装材料的热学和电学性质 16 Oct 2008

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。

评估板

DRV8410EVM — 适用于 DRV8410 具有电流调节功能的双 H 桥电机驱动器的评估模块

DRV8410 评估模块 (EVM) 支持设计人员评估 DRV8410 双 H 桥驱动器。该 EVM 包括一个 MCU 和一个图形用户界面 (GUI),用于轻松控制电机驱动器。该 EVM 附带所有必要的工具和软件,可立即开始旋转电机并加快电机驱动器评估。

用户指南: PDF | HTML
TI.com 無法提供
封装 引脚数 下载
HTSSOP (PWP) 16 了解详情

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持与培训

视频