产品详细信息

Protocols Bluetooth 5.2 Low Energy, Thread, Zigbee 3.0 RAM (KB) 40 Type Wireless MCU Features LE 1M PHY, LE 2M PHY, LE Coded PHY (long range), Bluetooth mesh, Zigbee coordinator, Zigbee network processor, Sleepy end device, OAD GPIO 31 Peripherals 1 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S Security Cryptographic acceleration, Debug security, Device identity, Software IP protection Sensitivity (best) (dBm) -104 Operating temperature range (C) -40 to 105 Rating Catalog
Protocols Bluetooth 5.2 Low Energy, Thread, Zigbee 3.0 RAM (KB) 40 Type Wireless MCU Features LE 1M PHY, LE 2M PHY, LE Coded PHY (long range), Bluetooth mesh, Zigbee coordinator, Zigbee network processor, Sleepy end device, OAD GPIO 31 Peripherals 1 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S Security Cryptographic acceleration, Debug security, Device identity, Software IP protection Sensitivity (best) (dBm) -104 Operating temperature range (C) -40 to 105 Rating Catalog
VQFN (RGZ) 48
  • Microcontroller
    • Powerful 48-MHz Arm Cortex-M4 processor
    • EEMBC CoreMark score: 148
    • 352KB of in-system Programmable Flash
    • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
    • 32KB of ultra-low leakage SRAM
    • 2-Pin cJTAG and JTAG debugging
    • Supports Over-the-Air upgrade (OTA)
  • RoHS-compliant package
    • 7-mm × 7-mm RGZ VQFN48 ( 31 GPIOs)
    • 5-mm × 5-mm RKP VQFN40 ( 23 GPIOs)
  • Peripherals
    • Digital peripherals can be routed to any GPIO
    • 4x 32-bit or 8x 16-bit general-purpose timers
    • 12-bit ADC, 200 ksps, 8 channels
    • Comparator with internal DAC
    • UART
    • SSI (SPI, MICROWIRE, TI)
    • I2C
    • I2S
    • Real-Time Clock (RTC)
    • AES 128-bit Crypto Accelerator
    • True Random Number Generator (TRNG)
    • Integrated temperature and battery monitor
  • External system
    • On-chip Buck DC/DC converter
  • Low power
    • Wide supply voltage range: 1.8 V to 3.8 V
    • Active-Mode RX: 6.8 mA
    • Active-Mode TX 0 dBm: 7.1 mA
    • Active-Mode TX 5 dBm: 9.6 mA
    • Active-Mode MCU 48 MHz (CoreMark): 3.60 mA (75 µA/MHz)
    • Standby: 0.92 µA (RTC on, 32KB RAM and CPU retention)
    • Shutdown: 150 nA (wakeup on external events)
  • Radio section
    • 2.4 GHz RF transceiver compatible with Bluetooth 5.2 Low Energy and earlier Low Energy specifications and IEEE 802.15.4 PHY and MAC
    • Excellent receiver sensitivity: -100 dBm for 802.15.4 (2.4 GHz), -104 dBm for Bluetooth 125-kbps (Low Energy Coded PHY)
    • Output power up to +5 dBm with temperature compensation
    • Suitable for systems targeting compliance with worldwide radio frequency regulations
      • EN 300 328, (Europe)
      • EN 300 440 Category 2
      • FCC CFR47 Part 15
      • ARIB STD-T66 (Japan)
  • Wireless protocols
  • Development Tools and Software
  • Microcontroller
    • Powerful 48-MHz Arm Cortex-M4 processor
    • EEMBC CoreMark score: 148
    • 352KB of in-system Programmable Flash
    • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
    • 32KB of ultra-low leakage SRAM
    • 2-Pin cJTAG and JTAG debugging
    • Supports Over-the-Air upgrade (OTA)
  • RoHS-compliant package
    • 7-mm × 7-mm RGZ VQFN48 ( 31 GPIOs)
    • 5-mm × 5-mm RKP VQFN40 ( 23 GPIOs)
  • Peripherals
    • Digital peripherals can be routed to any GPIO
    • 4x 32-bit or 8x 16-bit general-purpose timers
    • 12-bit ADC, 200 ksps, 8 channels
    • Comparator with internal DAC
    • UART
    • SSI (SPI, MICROWIRE, TI)
    • I2C
    • I2S
    • Real-Time Clock (RTC)
    • AES 128-bit Crypto Accelerator
    • True Random Number Generator (TRNG)
    • Integrated temperature and battery monitor
  • External system
    • On-chip Buck DC/DC converter
  • Low power
    • Wide supply voltage range: 1.8 V to 3.8 V
    • Active-Mode RX: 6.8 mA
    • Active-Mode TX 0 dBm: 7.1 mA
    • Active-Mode TX 5 dBm: 9.6 mA
    • Active-Mode MCU 48 MHz (CoreMark): 3.60 mA (75 µA/MHz)
    • Standby: 0.92 µA (RTC on, 32KB RAM and CPU retention)
    • Shutdown: 150 nA (wakeup on external events)
  • Radio section
    • 2.4 GHz RF transceiver compatible with Bluetooth 5.2 Low Energy and earlier Low Energy specifications and IEEE 802.15.4 PHY and MAC
    • Excellent receiver sensitivity: -100 dBm for 802.15.4 (2.4 GHz), -104 dBm for Bluetooth 125-kbps (Low Energy Coded PHY)
    • Output power up to +5 dBm with temperature compensation
    • Suitable for systems targeting compliance with worldwide radio frequency regulations
      • EN 300 328, (Europe)
      • EN 300 440 Category 2
      • FCC CFR47 Part 15
      • ARIB STD-T66 (Japan)
  • Wireless protocols
  • Development Tools and Software

The SimpleLink™ CC2651R3 device is a multiprotocol 2.4 GHz wireless microcontroller (MCU) supporting Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), and proprietary systems, including the TI 15.4-Stack (2.4 GHz). The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK).
  • Longer battery life wireless applications with low standby current of 0.92 µA with full RAM retention.
  • Industrial temperature ready with lowest standby current of 11 µA at 105°C.
  • Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ® Low Energy (-104 dBm for 125-kbps LE Coded PHY).

The CC2651R3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

The SimpleLink™ CC2651R3 device is a multiprotocol 2.4 GHz wireless microcontroller (MCU) supporting Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), and proprietary systems, including the TI 15.4-Stack (2.4 GHz). The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK).
  • Longer battery life wireless applications with low standby current of 0.92 µA with full RAM retention.
  • Industrial temperature ready with lowest standby current of 11 µA at 105°C.
  • Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ® Low Energy (-104 dBm for 125-kbps LE Coded PHY).

The CC2651R3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

下载

您可能感兴趣的类似产品

open-in-new 产品比较
功能与比较器件相同且具有相同引脚。
CC2652R 正在供货 具有 352kB 闪存的 SimpleLink™ 32 位 Arm Cortex-M4F 多协议 2.4GHz 无线 MCU Pin-to-pin upgrade with increased flash and RAM

技术文档

star = TI 精选相关文档
未找到结果。请清除搜索,并重试。
显示全部 6 项
类型 标题 下载最新的英文版本 日期
* 数据表 CC2651R3 SimpleLink™ Multiprotocol 2.4 GHz Wireless MCU 数据表 2021年 9月 10日
* 勘误表 CC2651R3 Silicon Errata 2021年 9月 13日
技术文章 An out-of-the-box Internet of Things: building a seamless and secure smart home network 2018年 6月 12日
技术文章 Thread vs. Zigbee – what’s the difference? 2018年 5月 16日
技术文章 Your microcontroller deserves a nap – designing “sleepy” wireless applications 2018年 3月 28日
技术文章 SimpleLink™ MCU SDKs: Breaking down TI Drivers 2017年 4月 12日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

评估板

LAUNCHXL-CC26X2R1 — SimpleLink™ 多标准 CC26x2R 无线 MCU LaunchPad™ 开发套件

重要提示:

该套件支持评估 SimpleLink 低功耗 Bluetooth® CC2642R 无线 MCUSimpleLink 多标准 CC2652R 无线 MCU


CC26x2R 器件是 SimpleLink™ 微控制器 (MCU) 平台的一部分,该平台包括 Wi-Fi®、低功耗 Bluetooth®、低于 1GHz、Thread、zigbee、802.15.4 和主机 MCU,它们共用一个易于使用的通用开发环境,其中包含单核软件开发套件 (SDK) 和丰富的工具集。借助一次性集成的 SimpleLink 平台,可以将产品组合中的任何器件组合添加至您的设计中,从而在设计要求变更时实现 100% 代码重用。更多详细信息,请访问 www.ti.com.cn/simplelink。此 LaunchPad 套件支持通过 Code Composer Studio™ 和 (...)

软件开发套件 (SDK)

SIMPLELINK-CC13X2-26X2-SDK — SimpleLink™ CC13x2 和 CC26x2 软件开发套件 (SDK)

SimpleLink CC13x2 和 CC26x2 软件开发套件 (SDK) 为低于 1GHz 和 2.4GHz 应用的开发提供了综合性软件包,包括支持 SimpleLink CC13x2 和 CC26x2 无线 MCU 上的低功耗 Bluetooth®、Zigbee®、Thread、基于 802.15.4 的专有解决方案和多协议解决方案。

开始使用

第 1 步:购买 LaunchPad
第 2 步:下载 CC13x2 和 CC26x2 SDK
第 3 步:开始使用 SimpleLink Academy


SimpleLink CC13X2 和 26X2 SDK

 

IDE、配置、编译器或调试器

ARM-CGT — Arm® 代码生成工具 - 编译器

TI Arm® 代码生成工具支持开发适用于 TI Arm 平台的应用,尤其是采用 TI Arm Cortex-M 和 Cortex-R 系列器件的应用。目前有两个 TI Arm® C/C++ 编译器工具链,它们均可用于编译和链接 C/C++ 和汇编源文件,以构建可在 Arm® Cortex-M 和 Cortex-R 系列器件上加载和运行的静态可执行应用程序。将根据器件系列推荐特定的编译器工具链。请参阅器件的 SDK 或软件包,以获取有关使用哪个工具链的信息。
  • 全新的 TI Arm® Clang 编译器工具 (ARM-CGT-CLANG-X) 是从开源的 clang 编译器及其支持的 LLVM 基础架构衍生出来的。今后所有新功能的开发都将在 TI Arm® Clang 编译器工具中完成。
  • 必要时将继续维护 TI Arm® C/C++ 编译器工具 (ARM-CGT-XX)。但是,旧版 TI Arm® C/C++ 编译器工具的 v20.2.x.LTS 维护版本中将仅提供漏洞修复。
Code Composer Studio 是适用于 TI 嵌入式器件的集成开发环境 (...)
IDE、配置、编译器或调试器

CCSTUDIO-WCS — 适用于无线连接的 Code Composer Studio (CCS) 集成开发环境 (IDE)

Download the latest version of Code Composer Studio

Code Composer Studio™ - Integrated Development Environment for SimpleLink™ Wireless Connectivity Solutions

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to (...)

光绘文件

LAUNCHXL-CC26x2R1 Design Files (Rev. A)

SWRC346A.ZIP (7301 KB)
封装 引脚 下载
VQFN (RGZ) 48 了解详情

订购与质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/FIT 估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品的参数、评估模块或参考设计可能与此 TI 产品相关

支持与培训

视频