Home Data converters Analog-to-digital converters (ADCs) High-speed ADCs (≥10 MSPS)
Home
Data converters
Analog-to-digital converters (ADCs)
High-speed ADCs (≥10 MSPS)

ADC12DJ4000RF

ACTIVE

RF-sampling 12-bit ADC with 4-GSPS dual channel or 8-GSPS single channel

Order now
Data sheet

ADC12DJ4000RF

ACTIVE
Data sheet Order now

Product details

Sample rate (max) (Msps) 4000, 8000 Resolution (Bits) 12 Number of input channels 1, 2 Interface type JESD204B, JESD204C Analog input BW (MHz) 8000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.8 Power consumption (typ) (mW) 3650 Architecture Folding Interpolating SNR (dB) 57 ENOB (bit) 9 SFDR (dB) 66 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 4000, 8000 Resolution (Bits) 12 Number of input channels 1, 2 Interface type JESD204B, JESD204C Analog input BW (MHz) 8000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.8 Power consumption (typ) (mW) 3650 Architecture Folding Interpolating SNR (dB) 57 ENOB (bit) 9 SFDR (dB) 66 Operating temperature range (°C) -40 to 85 Input buffer Yes
FCCSP (AAV) 144 100 mm² 10 x 10 FCCSP (ZEG) 144 100 mm² 10 x 10
  • ADC core:
    • 12-bit resolution
    • Up to 8 GSPS in single-channel mode
    • Up to 4 GSPS in dual-channel mode
  • Performance specifications:
    • Noise floor (–20 dBFS, VFS = 1 VPP-DIFF):
      • Dual-channel mode: –152.3 dBFS/Hz
      • Single-channel mode: –155.0 dBFS/Hz
    • ENOB (dual channel, FIN = 2.4 GHz): 8.8 Bits
  • Buffered analog inputs with VCMI of 0 V:
    • Analog input bandwidth (–3 dB): 8 GHz
    • Usable input frequency range: > 10 GHz
    • Full-scale input voltage (VFS, default): 0.8 VPP
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19-fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16 Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power (Diff): +26.5 dBm (+ 27.5 dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 3.7 W
  • Power supplies: 1.1 V, 1.9 V
  • ADC core:
    • 12-bit resolution
    • Up to 8 GSPS in single-channel mode
    • Up to 4 GSPS in dual-channel mode
  • Performance specifications:
    • Noise floor (–20 dBFS, VFS = 1 VPP-DIFF):
      • Dual-channel mode: –152.3 dBFS/Hz
      • Single-channel mode: –155.0 dBFS/Hz
    • ENOB (dual channel, FIN = 2.4 GHz): 8.8 Bits
  • Buffered analog inputs with VCMI of 0 V:
    • Analog input bandwidth (–3 dB): 8 GHz
    • Usable input frequency range: > 10 GHz
    • Full-scale input voltage (VFS, default): 0.8 VPP
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19-fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16 Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power (Diff): +26.5 dBm (+ 27.5 dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 3.7 W
  • Power supplies: 1.1 V, 1.9 V

The ADC12DJ4000RF device is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10 GHz. ADC12DJ4000RF can be configured as a dual-channel, 4 GSPS ADC or single-channel, 8 GSPS ADC. Support of a useable input frequency range of up to 10 GHz enables direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems.

The ADC12DJ4000RF uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16 Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.

The ADC12DJ4000RF device is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10 GHz. ADC12DJ4000RF can be configured as a dual-channel, 4 GSPS ADC or single-channel, 8 GSPS ADC. Support of a useable input frequency range of up to 10 GHz enables direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems.

The ADC12DJ4000RF uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16 Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.
open-in-new Find other High-speed ADCs (≥10 MSPS)
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
ADC08DJ5200RF ACTIVE RF-sampling 8-bit ADC with dual-channel 5.2 GSPS or single-channel 10.4 GSPS ADC08DJ5200RF offers higher speed, lower resolution, and no DDC.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet ADC12DJ4000RF 8-GSPS Single-Channel or 4-GSPS Dual-Channel, 12-bit, RF-Sampling Analog-to-Digital Converter (ADC) datasheet (Rev. B) PDF | HTML 08 Feb 2023
EVM User's guide ADCxxDJxx00RF-TRF1208 Evaluation Module User's Guide PDF | HTML 12 Oct 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ADC12DJ4000RFEVM — ADC12DJ4000RF evaluation module for 4-GSPS dual- or 8-GSPS single-channel, RF-sampling, 12-bit ADC

The ADC12DJ4000RF evaluation module (EVM) is a platform for evaluating the ADC12DJ4000RF. ADC12DJ4000RF is a low-power, 12-bit, dual-channel 4-GSPS or single-channel 8-GSPS, RF-sampling analog-to-digital converter (ADC) with a buffered analog input and integrated digital downconverter with (...)

User guide: PDF | HTML
Not available on TI.com
Firmware

TI-JESD204-IP — JESD204 Rapid Design IP for FPGAs connected to TI high-speed data converters

The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)
Request
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins Download
FCCSP (AAV) 144 View options
FCCSP (ZEG) 144 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos