
                                PLANES PROCESSOR
                                ----------------

                        01:06 PM Tuesday, March 11, 2014
Job Name: D:\PCB Projects\Expedition\Nanopower\EVM\ADS704x_SE_EVM\PCB\ADS704x_SE_EVM.pcb




    POSITIVE PLANE LAYER : 1

        Plane Shapes Found On This Layer : 0
        Plane Holes  Found On This Layer : 3


        PLANE NET : AGND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : YES
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 8th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 8th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 8th
            Default Hatch Distance            : 8th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 59
            Total Thru Pads Of This Net       : 10
            Total SMD  Pads Of This Net       : 15

            Plane Created : Layer 1 - Net AGND

                Via Pads In This Plane           : 49
                Thru Pads In This Plane          : 10
                SMD Pads In This Plane           : 11
                     
                Pads To Be Buried In Plane       : 51
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 8
                Pads With 3/4 Tie Connections    : 1
                Pads With 2/4 Tie Connections    : 7
                Pads With 1/4 Tie Connection     : 3

                    Pads With 3 Tie Legs : 1
                        Coordinates (th) :
                                1) X=231.75      Y=1,231.5       Pin: R44-2  

                    Pads With 2 Tie Legs : 7
                        Coordinates (th) :
                                1) X=503         Y=814.25        Pin: C27-2  
                                2) X=527         Y=270           Pin: R74-1  
                                3) X=530         Y=627           Pin: C22-2  
                                4) X=550         Y=738           Pin: R21-2  
                                5) X=608.75      Y=1,292.5       Pin: R45-2  
                                6) X=1,951.56    Y=1,112.95      Pin: J1-50  
                                7) X=1,953.04    Y=357.05        Pin: J1-2  

                    Pads With 1 Tie Legs : 3
                        Coordinates (th) :
                                1) X=1,953.04    Y=388.54        Pin: J1-4  
                                2) X=1,953.04    Y=483.03        Pin: J1-10  
                                3) X=1,953.04    Y=577.52        Pin: J1-16  


    POSITIVE PLANE LAYER : 2

        Plane Shapes Found On This Layer : 0
        Plane Holes  Found On This Layer : 0


        PLANE NET : AGND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : YES
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 59
            Total Thru Pads Of This Net       : 10
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 2 - Net AGND

                Via Pads In This Plane           : 59
                Thru Pads In This Plane          : 10
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 61
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 8


    POSITIVE PLANE LAYER : 3

        Plane Shapes Found On This Layer : 8
        Plane Holes  Found On This Layer : 0


        PLANE NET : AGND

            Total Plane Shapes For This Net   : 2
            Use Route Border As Plane Shape   : YES
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 10th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 59
            Total Thru Pads Of This Net       : 10
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net AGND

                Via Pads In This Plane           : 16
                Thru Pads In This Plane          : 4
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 16
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 3
                Pads With 2/4 Tie Connections    : 1

                    Pads With 2 Tie Legs : 1
                        Coordinates (th) :
                                1) X=890         Y=252.5         Pin: P4-2  (Thermal Override - 12/12/T4/P45)

            Plane Created : Layer 3 - Net AGND

                Via Pads In This Plane           : 8
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 8
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


        PLANE NET : +5P5V

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 4
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net +5P5V

                Via Pads In This Plane           : 4
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 4
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


        PLANE NET : OPA+

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 10th
            Mounting Hole / Contour Clearance : 20th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 3
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net OPA+

                Via Pads In This Plane           : 3
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 3
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


        PLANE NET : OPA-

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 10th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 5
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net OPA-

                Via Pads In This Plane           : 5
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 5
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


        PLANE NET : AVDD

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 8
            Total Thru Pads Of This Net       : 1
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net AVDD

                Via Pads In This Plane           : 8
                Thru Pads In This Plane          : 1
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 8
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 1


        PLANE NET : +5V

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 11
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net +5V

                Via Pads In This Plane           : 11
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 11
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


        PLANE NET : +3.3VD

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 10th
            Mounting Hole / Contour Clearance : 20th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 18
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net +3.3VD

                Via Pads In This Plane           : 18
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 18
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0


        PLANE NET : DVDD

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 7
            Total Thru Pads Of This Net       : 1
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 3 - Net DVDD

                Via Pads In This Plane           : 7
                Thru Pads In This Plane          : 1
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 7
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 2/4 Tie Connections    : 1

                    Pads With 2 Tie Legs : 1
                        Coordinates (th) :
                                1) X=890         Y=352.5         Pin: P4-1  (Thermal Override - 12/12/T4/P45)


    POSITIVE PLANE LAYER : 4

        Plane Shapes Found On This Layer : 1
        Plane Holes  Found On This Layer : 4


        PLANE NET : OPA-

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Number Tie Legs               : BURIED
            Default Thru Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 10th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 10th
            Default Hatch Distance            : 10th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 5
            Total Thru Pads Of This Net       : 0
            Total SMD  Pads Of This Net       : 3

            Plane Created : Layer 4 - Net OPA-

                Via Pads In This Plane           : 4
                Thru Pads In This Plane          : 0
                SMD Pads In This Plane           : 2
                     
                Pads To Be Buried In Plane       : 4
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 2/4 Tie Connections    : 2

                    Pads With 2 Tie Legs : 2
                        Coordinates (th) :
                                1) X=345         Y=448           Pin: R82-1  
                                2) X=400         Y=448           Pin: R81-1  


        PLANE NET : AGND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : YES
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 10th
            Plane To Other Metal Clearance    : 15th
            Mounting Hole / Contour Clearance : 25th
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : NO
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 8th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 8th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 8th
                Thermal Clearance             : 10th
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : YES
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 8th
            Default Hatch Distance            : 8th
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 59
            Total Thru Pads Of This Net       : 10
            Total SMD  Pads Of This Net       : 43

            Plane Created : Layer 4 - Net AGND

                Via Pads In This Plane           : 41
                Thru Pads In This Plane          : 10
                SMD Pads In This Plane           : 33
                     
                Pads To Be Buried In Plane       : 43
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 8
                Pads With 3/4 Tie Connections    : 15
                Pads With 2/4 Tie Connections    : 14
                Pads With 1/4 Tie Connection     : 3
                Pads With 0/4 Tie Connections    : 1

                Total With 0 Tie Connections     : 1
                    Connected To Trace           : 1

                No tieleg connections were due to isolation from plane,
                or the tielegs would have violated clearance requirements,
                or no tielegs were assigned to be created,
                or the pad belongs to a Routed Plane Pin,
                or the pad was a TestPad on top of another connected pad,
                or the pad was contained in a Plane No Connect Area.
                The pads connected to traces are not guaranteed to be
                fully electrically connected.  Connectivity DRC will
                report if this net is not fully connected.

                    Pads With 3 Tie Legs : 15
                        Coordinates (th) :
                                1) X=152.5       Y=1,069.25      Pin: C11-2  
                                2) X=288         Y=843           Pin: C17-2  
                                3) X=326         Y=59.5          Pin: R77-2  
                                4) X=375.75      Y=1,322.5       Pin: C36-2  
                                5) X=528         Y=1,256         Pin: C7-2  
                                6) X=638         Y=269           Pin: R76-1  
                                7) X=679.5       Y=520.5         Pin: C41-2  
                                8) X=682.5       Y=181.81        Pin: L1-2  
                                9) X=1,056.5     Y=1,015         Pin: C46-2  
                               10) X=1,183.68    Y=1,440.71      Pin: J2-12  
                               11) X=1,201.4     Y=870.83        Pin: J2-13  
                               12) X=1,406       Y=701.79        Pin: U1-1  
                               13) X=1,516.32    Y=642.5         Pin: C1-2  
                               14) X=1,551.79    Y=870.83        Pin: J2-14  
                               15) X=1,957.32    Y=1,271.61      Pin: J1-PAD  (Thermal Override - 12/12/T4/P45)

                    Pads With 2 Tie Legs : 14
                        Coordinates (th) :
                                1) X=345         Y=402           Pin: R82-2  
                                2) X=356.5       Y=843           Pin: R41-2  
                                3) X=499.5       Y=58            Pin: C58-2  
                                4) X=543         Y=242.5         Pin: C57-1  
                                5) X=790.02      Y=559.5         Pin: U12-2  
                                6) X=827.52      Y=1,052.5       Pin: U15-2  
                                7) X=857         Y=460.5         Pin: C40-2  
                                8) X=911         Y=1,415         Pin: C9-2  
                                9) X=1,327.38    Y=1,326.54      Pin: J2-6  
                               10) X=1,406       Y=727.38        Pin: U1-2  
                               11) X=1,406       Y=752.97        Pin: U1-3  
                               12) X=1,406       Y=778.56        Pin: U1-4  
                               13) X=1,461.24    Y=870.83        Pin: J2-9  
                               14) X=1,648.82    Y=590           Pin: R12-2  

                    Pads With 1 Tie Legs : 3
                        Coordinates (th) :
                                1) X=307.5       Y=631           Pin: R54-1  
                                2) X=544.9       Y=167.03        Pin: U13-5  
                                3) X=898.75      Y=1,347.5       Pin: C2-2  



                        01:06 PM Tuesday, March 11, 2014