• Menu
  • Product
  • Email
  • PDF
  • Order now
  • THVD8000 RS-485 Transceiver with OOK Modulation for Power Line Communication

    • SLLSFD6A May   2020  – March 2021 THVD8000

      PRODUCTION DATA  

  • CONTENTS
  • SEARCH
  • THVD8000 RS-485 Transceiver with OOK Modulation for Power Line Communication
  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 ESD Ratings - IEC Specifications
    4. 6.4 Recommended Operating Conditions
    5. 6.5 Thermal Information
    6. 6.6 Electrical Characteristics
    7. 6.7 Power Dissipation Characteristics
    8. 6.8 Switching Characteristics
    9. 6.9 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagrams
    3. 8.3 Feature Description
      1. 8.3.1 OOK Modulation with F_SET pin
      2. 8.3.2 OOK Demodulation
      3. 8.3.3 Transmitter Timeout
      4. 8.3.4 Polarity Free Operation
      5. 8.3.5 Glitch Free Mode Change
      6. 8.3.6 Integrated IEC ESD and EFT Protection
    4. 8.4 Device Functional Modes
      1. 8.4.1 OOK Mode
      2. 8.4.2 Thermal shutdown (TSD)
  9. 9 Application Information Disclaimer
    1. 9.1 Application information
    2. 9.2 Typical application (OOK mode)
      1. 9.2.1 Design requirements
        1. 9.2.1.1 Carrier frequency
      2. 9.2.2 Detailed design procedure
        1. 9.2.2.1 Inductor value selection
        2. 9.2.2.2 Capacitor value selection
      3. 9.2.3 Application Curves
  10. 10Power supply recommendations
  11. 11Layout
    1. 11.1 Layout guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Device Support
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Support Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. IMPORTANT NOTICE
search No matches found.
  • Full reading width
    • Full reading width
    • Comfortable reading width
    • Expanded reading width
  • Card for each section
  • Card with all content

 

DATA SHEET

THVD8000 RS-485 Transceiver with OOK Modulation for Power Line Communication

1 Features

  • 3-V – 5.5-V supply voltage
  • Half-duplex communication
    • Up to 500 kbps data rate with f0 / bps = 10
    • Higher data rates are possible with f0 / bps < 10
  • RS-485 electrical signaling with on-off keying (OOK) modulation
  • Pin selectable carrier frequency: 125 kHz – 5 MHz
  • Spread spectrum clocking for excellent EMI performance
  • Polarity free
  • TX timeout to avoid stuck bus conditions
  • Operational common-mode range: –7 V to 12 V
  • Bus I/O protection
    • ± 18-V DC fault protection
    • ± 16 kV HBM ESD
    • ± 8 kV IEC 61000-4-2 contact discharge
    • ± 15 kV IEC 61000-4-2 air gap discharge
    • ± 4 kV IEC 61000-4-4 fast transient burst
  • Extended temperature range: -40°C to 125°C
  • 8-Pin SOT-23 package for space constrained applications

2 Applications

  • HVAC systems
  • Building automation
  • Factory automation & control
  • Appliances
  • Lighting
  • Grid infrastructure
  • Power delivery

3 Description

THVD8000 is an RS-485 transceiver with on-off keying (OOK) modulation and demodulation built in for power line communication. Modulating data onto existing power lines allows power delivery and data communication to share a common pair of wires, resulting in a significant reduction of the system cost.

A pin programmable interface simplifies the system design. The carrier frequency can be adjusted by changing an external resistor on the F_SET pin. A broad range of carrier frequencies gives the system designer the flexibility to choose the external inductors and capacitors. In addition, OOK modulation operates with immunity to data polarity for ease of system installations.

Device Information
PART NUMBER PACKAGE(1) BODY SIZE (NOM)
THVD8000 SOT-23 (8) 2.90 mm × 1.60 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
GUID-20210225-CA0I-M1PM-K5GC-Q4FNZSKBHCQV-low.svg Simplified Schematic

4 Revision History

Changes from Revision * (May 2020) to Revision A (March 2021)

  • Changed the data sheet status From: Advanced Information To: Production dataGo

 

Texas Instruments

© Copyright 1995-2025 Texas Instruments Incorporated. All rights reserved.
Submit documentation feedback | IMPORTANT NOTICE | Trademarks | Privacy policy | Cookie policy | Terms of use | Terms of sale