ZHCSL04A March   2020  – July 2020 ISO1044

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Pin Configuration and Functions
    1.     Pin Functions—8 Pins
  6. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Power Ratings
    6. 6.6  Insulation Specifications
    7. 6.7  Safety-Related Certifications
    8. 6.8  Safety Limiting Values
    9. 6.9  Electrical Characteristics - DC Specification
    10. 6.10 Switching Characteristics
    11. 6.11 Insulation Characteristics Curves
    12. 6.12 Typical Characteristics
  7. Parametric Measurement Information
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 CAN Bus States
      2. 8.3.2 Digital Inputs and Outputs: TXD (Input) and RXD (Output)
      3. 8.3.3 Protection Features
        1. 8.3.3.1 TXD Dominant Timeout (DTO)
        2. 8.3.3.2 Thermal Shutdown (TSD)
        3. 8.3.3.3 Undervoltage Lockout and Default State
        4. 8.3.3.4 Floating Pins
        5. 8.3.3.5 Unpowered Device
        6. 8.3.3.6 CAN Bus Short Circuit Current Limiting
    4. 8.4 Device Functional Modes
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Bus Loading, Length and Number of Nodes
        2. 9.2.2.2 CAN Termination
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
      1. 11.1.1 PCB Material
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Support Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

特性

  • 符合 ISO 11898-2:2016 物理层标准
  • 支持高达 1Mbps 的经典 CAN 和高达 5Mbps 的 FD(灵活数据速率)
  • 保护特性
    • 直流总线故障保护电压:±58V
    • 总线引脚的 IEC ESD 容差:±8kV
    • 总线引脚的 HBM ESD 容差:±10kV
    • 驱动器显性超时 (TXD DTO)
    • VCC1 和 VCC2 欠压保护
  • 共模电压范围:±12V
  • 未上电时的理想无源、高阻抗总线终端
  • 高 CMTI:85kV/µs(最小值)
  • VCC1 电压范围:1.71V 至 5.5V
    • 支持连接到 CAN 控制器的 1.8V、2.5V、3.3V 和 5.0V 逻辑接口
  • VCC2 电压范围:4.5V 至 5.5V
  • 优异的电磁兼容性 (EMC)
    • 系统级 ESD、EFT 和浪涌抗扰性
    • 低辐射
  • 环境温度范围:–40°C 至 +125°C
  • 8-SOIC 封装
  • 安全相关认证:
    • 所有计划认证
    • 符合 DIN VDE V 0884-11:2017-01 标准的 VDE 增强型绝缘
    • UL 1577 组件认证计划
    • IEC 60950-1、IEC 62368-1、IEC 61010-1 和 GB 4943.1-2011 认证