SBAU416 November   2022


  1.   Abstract
  2.   Trademarks
  3. 1 Overview
    1. 1.1 ADS9817EVM-PDK Features
  4. 2Analog Interface
    1. 2.1 ADS9817 Device Connections
    2. 2.2 Input SMA Connections
  5. 3Digital Interface
  6. 4Power Supplies
  7. 5EVM Operation
    1. 5.1 ADS9817EVM Software Installation
    2. 5.2 USB Driver Installation
    3. 5.3 Connecting the Hardware and Starting the Software
    4. 5.4 Initial Required Setup on the Config Tab
    5. 5.5 Initial Required Setup on the Capture Tab
    6. 5.6 Using the INL/DNL Tool
  8. 6Bill of Materials, Schematics, and Layout
    1. 6.1 Bill of Materials (BOM)
    2. 6.2 Schematics
    3. 6.3 Layout


This user's guide describes the characteristics, operation, and use of the ADS9817EVM-PDK evaluation module (EVM) performance demonstration kit (PDK). This kit is an evaluation platform for the ADS9817, which is an 8-channel, 18-bit, 2-MSPS per channel, single-ended input, successive approximation register (SAR) analog-to-digital converter (ADC) with a complementary metal oxide semiconductor (CMOS) digital interface. The EVM-PDK also includes an adapter printed circuit board (PCB) that facilitates connection to a standard FPGA mezzanine card (FMC) connecter used in many field-programmable gate array (FPGA) kits. The EVM-PDK eases the evaluation of the ADS9817 device with hardware, software, and computer connectivity through the universal serial bus (USB) interface. This user's guide includes complete circuit descriptions, schematic diagrams, and a bill of materials (BOM). Throughout this document, the terms demonstration kit, evaluation board, evaluation module, EVM, and EVM-PDK are synonymous with the ADS9817EVM-PDK.

ADS9817EVM-PDK Evaluation Module