SPRUGR9H November   2010  – April 2015 66AK2E05 , 66AK2H06 , 66AK2H12 , 66AK2H14 , 66AK2L06 , AM5K2E02 , AM5K2E04 , SM320C6678-HIREL , TMS320C6652 , TMS320C6654 , TMS320C6655 , TMS320C6657 , TMS320C6670 , TMS320C6671 , TMS320C6672 , TMS320C6674 , TMS320C6678

 

  1.   Preface
    1.     About This Manual
    2.     Trademarks
    3.     Notational Conventions
    4.     Related Documentation from Texas Instruments
  2. 1Introduction
    1. 1.1  Terminology Used in This Document
    2. 1.2  KeyStone I Features
    3. 1.3  KeyStone I Functional Block Diagram
    4. 1.4  KeyStone II Changes to QMSS
    5. 1.5  KeyStone II QMSS Modes of Use
      1. 1.5.1 Shared Mode
      2. 1.5.2 Split Mode
    6. 1.6  Overview
    7. 1.7  Queue Manager
    8. 1.8  Packet DMA (PKTDMA)
    9. 1.9  Navigator Cloud
    10. 1.10 Virtualization
    11. 1.11 ARM-DSP Shared Use
    12. 1.12 PDSP Firmware
  3. 2Operational Concepts
    1. 2.1 Packets
    2. 2.2 Queues
      1. 2.2.1 Packet Queuing
      2. 2.2.2 Packet De-queuing
      3. 2.2.3 Queue Proxy
    3. 2.3 Queue Types
      1. 2.3.1 Transmit Queues
      2. 2.3.2 Transmit Completion Queues
      3. 2.3.3 Receive Queues
      4. 2.3.4 Free Descriptor Queues (FDQ)
        1. 2.3.4.1 Host Packet Free Descriptors
        2. 2.3.4.2 Monolithic Free Descriptors
      5. 2.3.5 Queue Pend Queues
    4. 2.4 Descriptors
      1. 2.4.1 Host Packet
      2. 2.4.2 Host Buffer
      3. 2.4.3 Monolithic Packet
    5. 2.5 Packet DMA
      1. 2.5.1 Channels
      2. 2.5.2 RX Flows
    6. 2.6 Packet Transmission Overview
    7. 2.7 Packet Reception Overview
    8. 2.8 ARM Endianess
  4. 3Descriptor Layouts
    1. 3.1 Host Packet Descriptor
    2. 3.2 Host Buffer Descriptor
    3. 3.3 Monolithic Descriptor
  5. 4Registers
    1. 4.1 Queue Manager
      1. 4.1.1 Queue Configuration Region
        1. 4.1.1.1 Revision Register (0x00000000)
        2. 4.1.1.2 Queue Diversion Register (0x00000008)
        3. 4.1.1.3 Linking RAM Region 0 Base Address Register (0x0000000C)
        4. 4.1.1.4 Linking RAM Region 0 Size Register (0x00000010)
        5. 4.1.1.5 Linking RAM Region 1 Base Address Register (0x00000014)
        6. 4.1.1.6 Free Descriptor/Buffer Starvation Count Register N (0x00000020 + N×4)
      2. 4.1.2 Queue Status RAM
      3. 4.1.3 Descriptor Memory Setup Region
        1. 4.1.3.1 Memory Region R Base Address Register (0x00000000 + 16×R)
        2. 4.1.3.2 Memory Region R Start Index Register (0x00000004 + 16×R)
        3. 4.1.3.3 Memory Region R Descriptor Setup Register (0x00000008 + 16×R)
      4. 4.1.4 Queue Management/Queue Proxy Regions
        1. 4.1.4.1 Queue N Register A (0x00000000 + 16×N)
        2. 4.1.4.2 Queue N Register B (0x00000004 + 16×N)
        3. 4.1.4.3 Queue N Register C (0x00000008 + 16×N)
        4. 4.1.4.4 Queue N Register D (0x0000000C + 16×N)
      5. 4.1.5 Queue Peek Region
        1. 4.1.5.1 Queue N Status and Configuration Register A (0x00000000 + 16×N)
        2. 4.1.5.2 Queue N Status and Configuration Register B (0x00000004 + 16×N)
        3. 4.1.5.3 Queue N Status and Configuration Register C (0x00000008 + 16×N)
        4. 4.1.5.4 Queue N Status and Configuration Register D (0x0000000C + 16×N)
    2. 4.2 Packet DMA
      1. 4.2.1 Global Control Registers Region
        1. 4.2.1.1 Revision Register (0x00)
        2. 4.2.1.2 Performance Control Register (0x04)
        3. 4.2.1.3 Emulation Control Register (0x08)
        4. 4.2.1.4 Priority Control Register (0x0C)
        5. 4.2.1.5 QMn Base Address Register (0x10, 0x14, 0x18, 0x1c)
      2. 4.2.2 TX DMA Channel Configuration Region
        1. 4.2.2.1 TX Channel N Global Configuration Register A (0x000 + 32×N)
        2. 4.2.2.2 TX Channel N Global Configuration Register B (0x004 + 32×N)
      3. 4.2.3 RX DMA Channel Configuration Region
        1. 4.2.3.1 RX Channel N Global Configuration Register A (0x000 + 32×N)
      4. 4.2.4 RX DMA Flow Configuration Region
        1. 4.2.4.1 RX Flow N Configuration Register A (0x000 + 32×N)
        2. 4.2.4.2 RX Flow N Configuration Register B (0x004 + 32×N)
        3. 4.2.4.3 RX Flow N Configuration Register C (0x008 + 32×N)
        4. 4.2.4.4 RX Flow N Configuration Register D (0x00C + 32×N)
        5. 4.2.4.5 RX Flow N Configuration Register E (0x010 + 32×N)
        6. 4.2.4.6 RX Flow N Configuration Register F (0x014 + 32×N)
        7. 4.2.4.7 RX Flow N Configuration Register G (0x018 + 32×N)
        8. 4.2.4.8 RX Flow N Configuration Register H (0x01C + 32×N)
      5. 4.2.5 TX Scheduler Configuration Region
        1. 4.2.5.1 TX Channel N Scheduler Configuration Register (0x000 + 4×N)
    3. 4.3 QMSS PDSPs
      1. 4.3.1 Descriptor Accumulation Firmware
        1. 4.3.1.1 Command Buffer Interface
        2. 4.3.1.2 Global Timer Command Interface
        3. 4.3.1.3 Reclamation Queue Command Interface
        4. 4.3.1.4 Queue Diversion Command Interface
      2. 4.3.2 Quality of Service Firmware
        1. 4.3.2.1 QoS Algorithms
          1. 4.3.2.1.1 Modified Token Bucket Algorithm
        2. 4.3.2.2 Command Buffer Interface
        3. 4.3.2.3 QoS Firmware Commands
        4. 4.3.2.4 QoS Queue Record
        5. 4.3.2.5 QoS Cluster Record
        6. 4.3.2.6 RR-Mode QoS Cluster Record
        7. 4.3.2.7 SRIO Queue Monitoring
          1. 4.3.2.7.1 QoS SRIO Queue Monitoring Record
      3. 4.3.3 Open Event Machine Firmware
      4. 4.3.4 Interrupt Operation
        1. 4.3.4.1 Interrupt Handshaking
        2. 4.3.4.2 Interrupt Processing
        3. 4.3.4.3 Interrupt Generation
        4. 4.3.4.4 Stall Avoidance
      5. 4.3.5 QMSS PDSP Registers
        1. 4.3.5.1 Control Register (0x00000000)
        2. 4.3.5.2 Status Register (0x00000004)
        3. 4.3.5.3 Cycle Count Register (0x0000000C)
        4. 4.3.5.4 Stall Count Register (0x00000010)
    4. 4.4 QMSS Interrupt Distributor
      1. 4.4.1 INTD Register Region
        1. 4.4.1.1  Revision Register (0x00000000)
        2. 4.4.1.2  End Of Interrupt (EOI) Register (0x00000010)
        3. 4.4.1.3  Status Register 0 (0x00000200)
        4. 4.4.1.4  Status Register 1 (0x00000204)
        5. 4.4.1.5  Status Register 2 (0x00000208)
        6. 4.4.1.6  Status Register 3 (0x0000020c)
        7. 4.4.1.7  Status Register 4 (0x00000210)
        8. 4.4.1.8  Status Clear Register 0 (0x00000280)
        9. 4.4.1.9  Status Clear Register 1 (0x00000284)
        10. 4.4.1.10 Status Clear Register 4 (0x00000290)
        11. 4.4.1.11 Interrupt N Count Register (0x00000300 + 4xN)
  6. 5Mapping Information
    1. 5.1 Queue Maps
    2. 5.2 Interrupt Maps
      1. 5.2.1 KeyStone I TCI661x, C6670, C665x devices
      2. 5.2.2 KeyStone I TCI660x, C667x devices
      3. 5.2.3 KeyStone II devices
    3. 5.3 Memory Maps
      1. 5.3.1 QMSS Register Memory Map
      2. 5.3.2 KeyStone I PKTDMA Register Memory Map
      3. 5.3.3 KeyStone II PKTDMA Register Memory Map
    4. 5.4 Packet DMA Channel Map
  7. 6Programming Information
    1. 6.1 Programming Considerations
      1. 6.1.1 System Planning
      2. 6.1.2 Notification of Completed Work
    2. 6.2 Example Code
      1. 6.2.1 QMSS Initialization
      2. 6.2.2 PKTDMA Initialization
      3. 6.2.3 Normal Infrastructure DMA with Accumulation
      4. 6.2.4 Bypass Infrastructure notification with Accumulation
      5. 6.2.5 Channel Teardown
    3. 6.3 Programming Overrides
    4. 6.4 Programming Errors
    5. 6.5 Questions and Answers
  8. AExample Code Utility Functions
  9. BExample Code Types
  10. CExample Code Addresses
    1. C.1 KeyStone I Addresses:
    2. C.2 KeyStone II Addresses:
  11.   Revision History

4.2.4.1 RX Flow N Configuration Register A (0x000 + 32×N)

The RX Flow N Configuration Register A contains static configuration information for the RX DMA flow. The fields in this register can be safely changed only when all of the DMA channels that use this flow have been disabled. The fields in this register are shown in Figure 4-27:

Figure 4-27 RX Flow N Configuration Register A (0x000 + 32×N)
31 30 29 28 27 26 25
Reserved RX_EINFO_PRESENT RX_PSINFO
_PRESENT		 RX_ERROR
_HANDLING		 RX_DESC
_TYPE		 RX_PS
_LOCATION
W-0 W-0 W-0 W-0 W-0 W-0
24 16 15 14 13 12 11 0
RX_SOP_OFFSET Reserved RX_DEST
_QMGR		 RX_DEST_QNUM
W-0 W-0 W-0 W-0
Legend: W = Write only; - n = value after reset

Table 4-35 RX Flow N Configuration Register A Field Descriptions

Bit Field Description
31 Reserved Reads return 0 and writes have no effect.
30 RX_EINFO_PRESENT RX Extended Packet Data Block Present: This bit controls whether or not the extended packet info block (EPIB) will be present in the RX packet descriptor.
  • 0 = The port DMA will clear the EPIB Present bit in the PD and will drop any EPIB data words that are presented from the back end application.
  • 1 = The port DMA will set the EPIB Present bit in the PD and will copy any EPIB data words that are presented across the RX streaming interface into the EPIB words in the descriptor. If no EPIB words are presented from the back end application, the port DMA will overwrite the fields with 0s.
29 RX_PSINFO_PRESENT RX Protocol Specific Words Present: This bit controls whether or not the protocol specific words will be present in the RX packet descriptor.
  • 0 = The port DMA will set the PS word count to 0 in the PD and will drop any PS words that are presented from the back end application.
  • 1 = The port DMA will set the PS word count to the value given by the back end application and will copy the PS words from the back end application to the location specified by RX_PS_LOCATION.
28 RX_ERROR_HANDLING RX Error Handling Mode: This bit controls the error handling mode for the flow and is used only when channel errors (i.e. descriptor or buffer starvation) occurs:
  • 0 = Starvation errors result in dropping packet and reclaiming any used descriptor or buffer resources back to the original queues/pools they were allocated to.
  • 1 = Starvation errors result in subsequent re-try of the descriptor allocation operation. In this mode, the DMA will save its internal operational state back to the internal state RAM without issuing an advance operation to its internal FIFO buffers. This results in the DMA re-initiating the data transfer at the time specified in the TIMEOUT field of the Performance Control Register with the intention that additional free buffers and/or descriptors will be added.
27-26 RX_DESC_TYPE RX Descriptor Type: This field indicates the descriptor type to use:
  • 0 = Host
  • 1 = Reserved
  • 2 = Monolithic
  • 3 = Reserved
25 RX_PS_LOCATION RX Protocol Specific Location: This bit controls where the protocol-specific words will be placed in the host mode data structure.
  • 0 = The DMA will clear the protocol specific region location bit in the PD and will place the protocol-specific words at the end of the packet descriptor.
  • 1 = The DMA will set the protocol specific region location bit in the PD and will place the protocol specific words at the beginning of the data buffer. When this mode is used, it is required that the resulting target data buffer pointer (which is calculated by adding the host_rx_sop_offset to the original buffer pointer in the packet descriptor) is aligned to a 32-bit boundary to avoid unwanted buffer truncation as the DMA will round up to the next 32-bit aligned boundary.
24-16 RX_SOP_OFFSET RX Start of Packet Offset: For Host packets, this field specifies the number of bytes that are to be skipped in the SOP buffer before beginning to write the payload or Protocol Specific bytes (if PS is located in the SOP buffer). If PS words are located in the SOP buffer, the first word of payload data will immediately follow the last word of PS data. Either way, this field can be used to create a hole at the start of the SOP buffer for software use.

For Monolithic packets, the value of this field must always include the 12 byte descriptor header (offset starts from the descriptor address). So, it must be initialized to be greater than or equal to the size of the descriptor header (12 bytes) plus the size of the maximum number of Protocol Specific words that will be encountered in any of the packets that will be transferred by this flow (if EPIB is present, 20 additional bytes must be added to this offset). This is important as the primary purpose of this field is to ensure that the Protocol Specific words are not overwritten by payload data. The secondary purpose of this field is to allow a hole to be created prior to the payload that can be used by software.

Valid values are 0 – 511 bytes.
15-14 Reserved Reads return 0 and writes have no effect.
13-12 RX_DEST_QMGR RX Destination Queue Manager. This field indicates the default receive queue manager that this channel should use.
11-0 RX_DEST_QNUM RX Destination Queue. This field indicates the default receive queue that packets on this flow should be placed onto.