4 Revision History
Changes from D Revision (June 2017) to E Revision
-
Moved the automotive device to a standalone data sheet (SNIS201) Go
-
Changed TO-92 GND pin number from: 1 to: 3 Go
-
Changed TO-92 VDD pin number from: 3 to: 1 Go
Changes from C Revision (October 2015) to D Revision
-
Updated data sheet text to the latest documentation and translations standardsGo
-
Added AEC-Q100 automotive qualification bullets to FeaturesGo
-
Added Time Constant graphGo
-
Removed disk drivers, games, wireless transceivers, and cell phones from ApplicationsGo
-
Added LPG (TO-92S) packageGo
-
Added Figure 10 to Typical CharacteristicsGo
Changes from B Revision (May 2014) to C Revision
-
Deleted all mentions of TO-126 packageGo
-
Added TO-92 LPM pin configuration graphicGo
-
Changed Handling Ratings to ESD Ratings and moved Storage Temperature to Absolute Maximum Ratings tableGo
-
Changed KV to V Go
-
Added layout recommendation for TO-92 LP and LPM packagesGo
Changes from A Revision (June 2013) to B Revision
-
Changed data sheet flow and layout to conform with new TI standards. Added the following sections: Application and Implementation, Power Supply Recommendations, Layout, Device and Documentation Support, Mechanical, Packaging, and Orderable Information Go
-
Added TO92 and TO126 package information.Go
-
Changed from 450°C/W to 275 °C/W. New specification is derived using TI ' s latest methodology. Go
-
Changed Temperature Accuracy VDD condition from 2.4V to 2.2V for range of 40°C to 150°C. Go
-
Deleted Note: The input current is leakage only and is highest at high temperature. It is typically only 0.001 µA. The 1 µA limit is solely based on a testing limitation and does not reflect the actual performance of the part.Go