SLLSF86C May   2018  – March 2022

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Description Continued
  6. 6 Device Comparison Table
  7. 7 Pin Configuration and Functions
  8. 8 Specifications
    1. 8.1  Absolute Maximum Ratings
    2. 8.2  Recommended Operating Conditions
    3. 8.3  Thermal Information
    4. 8.4  Power Ratings
    5. 8.5  Insulation Specifications
    6. 8.6  Safety-Related Certifications
    7. 8.7  Safety Limiting Values
    8. 8.8  Electrical Characteristics
    9. 8.9  Supply Current Characteristics at VISOOUT = 3.3 V
    10. 8.10 Supply Current Characteristics at  VISOOUT = 5 V
    11. 8.11 Switching Characteristics at VISOOUT = 3.3 V
    12. 8.12 Switching Characteristics at VISOOUT = 5 V
    13. 8.13 Insulation Characteristics Curves
    14. 8.14 Typical Characteristics
  9. 9 Parameter Measurement Information
  10. 10Detailed Description
    1. 10.1 Overview
    2. 10.2 Power Isolation
    3. 10.3 Signal Isolation
    4. 10.4 RS-485
    5. 10.5 Functional Block Diagram
    6. 10.6 Feature Description
      1. 10.6.1 Power-Up and Power-Down Behavior
      2. 10.6.2 Protection Features
      3. 10.6.3 Failsafe Receiver
      4. 10.6.4 Glitch-Free Power Up and Power Down
    7. 10.7 Device Functional Modes
    8. 10.8 Device I/O Schematics
  11. 11Application and Implementation
    1. 11.1 Application Information
    2. 11.2 Typical Application
      1. 11.2.1 Design Requirements
      2. 11.2.2 Detailed Design Procedure
        1. 11.2.2.1 Data Rate, Bus Length and Bus Loading
        2. 11.2.2.2 Stub Length
        3. 11.2.2.3 Insulation Lifetime
  12. 12Power Supply Recommendations
  13. 13Layout
    1. 13.1 Layout Guidelines
    2. 13.2 Layout Example
  14. 14Device and Documentation Support
    1. 14.1 Documentation Support
      1. 14.1.1 Related Documentation
    2. 14.2 Receiving Notification of Documentation Updates
    3. 14.3 Support Resources
    4. 14.4 Trademarks
    5. 14.5 Electrostatic Discharge Caution
    6. 14.6 Glossary
  15. 15Mechanical, Packaging, and Orderable Information

8.9 Supply Current Characteristics at VISOOUT = 3.3 V

over recommended operating conditions, VDD = VIO = 3 to 5.5 V, MODE=GND2, GND1 = GNDIO, GND2 = GISOIN (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Power converter disabled
IDD Power converter supply current EN=GND1, D, DE, RE  floating 0.23 0.45 mA
IIO Logic supply current EN=GND1, D, DE, RE  floating 0.24 0.55 mA
Power converter supply current: Driver enabled, receiver disabled
IDD Power converter supply current VDE = VIO, VRE = VIO, bus load = 120 Ω, VD= VIO, VDD = 5 V ± 10%, A and B floating 56 77 mA
VDE = VIO, VRE = VIO, bus load = 120 Ω, VD= VIO, VDD = 3.3 V ± 10%, A and B floating 69 125 mA
IDD Power converter supply current, ISOW1412 VDE = VIO, VRE = VIO, bus load = 120 Ω || 50 pF, D = 500-kbps square wave 50% duty, VDD = 5 V ± 10% 62 86 mA
VDE = VIO, VRE = VIO, bus load = 100 Ω || 50 pF, D = 500-kbps square wave 50% duty, VDD = 5 V ± 10% 69 88 mA
VDE = VIO, VRE = VIO, bus load = 54 Ω || 50 pF, D = 500-kbps square wave 50% duty, VDD = 5 V ± 10% 90 122 mA
VDE = VIO, VRE = VIO, bus load = 120 Ω || 50 pF, D = 500-kbps square wave 50% duty, VDD = 3.3 V ± 10% 76 131 mA
VDE = VIO, VRE = VIO, bus load = 100 Ω || 50 pF, D = 500-kbps square wave 50% duty, VDD = 3.3 V ± 10% 84 131 mA
VDE = VIO, VRE = VIO, bus load = 54 Ω || 50 pF, D = 500-kbps square wave 50% duty, VDD = 3.3 V ± 10% 111 158 mA
IDD Power converter supply current, ISOW1432 VDE = VIO, VRE = VIO, bus load = 120 Ω || 50 pF, D = 12-Mbps square wave 50% duty, VDD = 5 V ± 10% 87 99 mA
VDE = VIO, VRE = VIO, bus load = 100 Ω || 50 pF, D = 12-Mbps square wave 50% duty, VDD = 5 V ± 10% 69 96 mA
VDE = VIO, VRE = VIO, bus load = 54 Ω || 50 pF, D = 12-Mbps square wave 50% duty, VDD = 5 V ± 10% 114 130 mA
VDE= VIO, VRE = VIO, bus load = 120 Ω || 50 pF, D = 12-Mbps square wave 50% duty, VDD = 3.3 V ± 10% 105 135 mA
VDE= VIO, VRE = VIO, bus load = 100 Ω || 50 pF, D = 12-Mbps square wave 50% duty, VDD = 3.3 V ± 10% 84 140 mA
VDE = VIO, VRE = VIO, bus load = 54 Ω || 50 pF, D = 12-Mbps square wave 50% duty, VDD = 3.3 V ± 10% 137 163 mA
Power converter supply current: Driver disabled, receiver enabled
IDD Power converter supply current, ISOW1412 VDE = VGND1, VRE= VGND1, Y and Z bus loaded and unloaded, A-B = square wave 500-kbps 50% duty VD= VGND1, VDD = 5 V ± 10%, CL on R = 15 pF 16 28 mA
VDE = VGND1, VRE= VGND1, Y and Z bus loaded and unloaded, A-B = square wave 500-kbps 50% duty VD= VGND1, VDD = 3.3 V ± 10%, CL on R = 15 pF 18 30
IDD Power converter supply current, ISOW1432 VDE = VGND1, VRE= VGND1, Y and Z bus loaded and unloaded, A-B = square wave 12-Mbps 50% duty VD= VGND1, VDD = 5 V ± 10%, CL on R = 15 pF 15 22 mA
VDE = VGND1, VRE= VGND1, Y and Z bus loaded and unloaded, A-B = square wave 12-Mbps 50% duty VD= VGND1, VDD = 3.3 V ± 10%, CL on R = 15 pF 17 27
Power converter supply current: Driver enabled, receiver enabled
IDD Power converter supply current, ISOW1412 VDE = VIO, VRE= VGND1, Y and Z bus load = 120 Ω || 50 pF, loopback(1), D = 500-kbps 50% duty, VDD = 5 V ± 10%, CL on R = 15 pF 63 102 mA
VDE = VIO, VRE= VGND1, Y and Z bus load = 120 Ω || 50 pF, loopback(1), D = 500-kbps 50% duty, VDD = 3.3 V ± 10%, CL on R = 15 pF 77 129
IDD Power converter supply current, ISOW1432 VDE = VIO, VRE= VGND1, Y and Z bus load = 120 Ω || 50 pF, loopback(1), D = 12-Mbps 50% duty, VDD = 5 V ± 10%, CL on R = 15 pF 90 105 mA
VDE = VIO, VRE= VGND1, Y and Z bus load = 120 Ω || 50 pF, loopback(1), D = 12-Mbps 50% duty, VDD = 3.3 V ± 10%, CL on R = 15 pF 109 138
Logic supply current: Driver disabled, receiver disabled
IIO Logic supply current VDE = VGND1, VRE = VIO , VD = VIO, VIO= 3.3 V ± 10% 3.2 6.0 mA
Logic supply current: Driver enabled, Receiver enabled, static
IIO Logic supply current VDE = VIO, VRE= VGND1, VD = VIO, loopback(1), VIO= 3.3 V ± 10% 4 6.8 mA
Logic supply current: Driver enabled, receiver enabled, dynamic
IIO Logic supply current, ISOW1412 VDE = VIO, VRE= VGND1, D = 500-kbps 50% duty square wave, loopback(1), VIO = 3.3 V ± 10% 4.6 7.2 mA
IIO Logic supply current, ISOW1432 VDE = VIO, VRE = VGND1 , D = 12-Mbps 50% duty square wave, loopback(1), VIO = 3.3 V ± 10% 4.6 7.2 mA
(1) The output of the driver is connected to the input of a receiverin a loopback mode.