ZHCSNF8A March   2021  – December 2023 TUSB216I

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Device Comparison
  6. Pin Configuration and Functions
  7. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics
    7. 6.7 Timing Requirements
  8. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 High-Speed Boost
      2. 7.3.2 RX Sensitivity
    4. 7.4 Device Functional Modes
      1. 7.4.1 Low-Speed (LS) Mode
      2. 7.4.2 Full-Speed (FS) Mode
      3. 7.4.3 High-Speed (HS) Mode
      4. 7.4.4 High-Speed Downstream Port Electrical Compliance Test Mode
      5. 7.4.5 Shutdown Mode
      6. 7.4.6 I2C Mode
      7. 7.4.7 BC 1.2 Battery Charging Controller
    5. 7.5 TUSB216 Registers
  9. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Test Procedure to Construct USB High-speed Eye Diagram
          1. 8.2.2.1.1 For a Host Side Application
          2. 8.2.2.1.2 For a Device Side Application
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. Device and Documentation Support
    1. 9.1 接收文档更新通知
    2. 9.2 支持资源
    3. 9.3 Trademarks
    4. 9.4 静电放电警告
    5. 9.5 术语表
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Device Comparison

TUSB211A TUSB212 TUSB214 TUSB216 TUSB217A
Industrial Variant Available Y Y Y Y Y
Automotive Variant Available Y Y Y Y Y
Supply (V) 2.3 to 6.5 3.3 3.3 2.3 to 6.5 2.3 to 6.5
DC Boost Tandem with AC Boost 3 levels 3 levels Tandem with AC Boost Tandem with AC Boost
I2C Control N Y Y Y Y
RX pre-equalization for ISI compensation N/A N/A N/A 3 levels 3 levels
Charging Downstream Port (CDP) controller N/A N/A Always ON Pin Controlled Always ON. Dynamically selected by DCP/CDP pin
Dedicated Charging Port (DCP) controller N/A N/A N/A N/A Always ON. Dynamically selected by DCP/CDP pin
Cable length compensation for near-end high-speed eye mask Compliance (pre-channel before redriver/post-channel after redriver) (meter - gauge) 6/3 - 28AWG (10 - 24AWG with one redriver on each end) 4/2 - 28AWG 4/2 - 28AWG 6/3 - 28AWG (10 - 24AWG with one redriver on each end) 6/3 - 28AWG (10 - 24AWG with one redriver on each end)
Cable length compensation for far-end high-speed eye mask Compliance (pre-channel before redriver/post-channel after redriver) (meter - gauge) 10/8 - 26AWG (10 - 28AWG with one redriver on each end) 8/6 - 28AWG 8/6 - 28AWG 10/8 - 26AWG (10 - 28AWG with one redriver on each end) 10/8 - 26AWG (10 - 28AWG with one redriver on each end)