ZHCS996D June   2012  – February 2018 TPS81256

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      典型应用
      2.      效率与负载电流间的关系
  4. 4 修订历史记录
  5. 5 Device Options
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Operation
      2. 8.3.2 Power-Save Mode
      3. 8.3.3 Current Limit Operation, Maximum Output Current
    4. 8.4 Device Functional Modes
      1. 8.4.1 Softstart, Enable
      2. 8.4.2 Load Disconnect and Reverse Current Protection
      3. 8.4.3 Undervoltage Lockout
      4. 8.4.4 Thermal Regulation
      5. 8.4.5 Thermal Shutdown
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Output Capacitor Selection CEXT
        2. 9.2.2.2 Input Capacitor Selection
      3. 9.2.3 Application Curves
    3. 9.3 System Examples
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Surface Mount Information
    4. 11.4 Thermal and Reliability Information
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 第三方产品免责声明
    2. 12.2 社区资源
    3. 12.3 商标
    4. 12.4 静电放电警告
    5. 12.5 Glossary
  13. 13机械、封装和可订购信息

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • SIP|9
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.5 Electrical Characteristics

Minimum and maximum values are at VIN = 2.5V to 5.5V, VOUT = 5.0V (or VIN, whichever is higher), EN = 1.8V, TA = –40°C to 85°C; Circuit of Parameter Measurement Information section (unless otherwise noted). Typical values are at VIN = 3.6V, VOUT = 5.0V, EN = 1.8V, TA = 25°C (unless otherwise noted).
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY CURRENT
IQ Operating quiescent current into VIN(1) IOUT = 0mA, VOUT = 5.0V, VIN = 3.6V
EN = VIN
Device not switching		 30 50 µA
Operating quiescent current into VOUT(1) 7 20 µA
ISD Shutdown current(1) EN = GND 0.85 5.0 μA
VUVLO Under-voltage lockout threshold Falling 2.0 2.1 V
Hysteresis 0.1 V
ENABLE
VIL Low-level input voltage 0.4 V
VIH High-level input voltage 1.0 V
Ilkg Input leakage current Input connected to GND or VIN 0.5 µA
OUTPUT
VOUT Regulated DC output voltage 2.5V ≤ VIN ≤ 4.85V, IOUT = 0mA
PWM operation. Open Loop		 4.92 5 5.08 V
3.3V ≤ VIN ≤ 4.85V, 0mA ≤ IOUT ≤ 550mA
PFM/PWM operation		 4.85 5 5.2 V
2.9V ≤ VIN ≤ 4.85V, 0mA ≤ IOUT ≤ 450mA
PFM/PWM operation		 4.85 5 5.2 V
ΔVOUT Power-save mode output ripple voltage PFM operation, IOUT = 1mA 35 mVpk
PWM mode output ripple voltage PWM operation, IOUT = 200mA 8 mVpk
POWER SWITCH
rDS(on) Input-to-output On-resistance VI = 5.25 V. Device not switching 320 mΩ
Ilkg Reverse leakage current into VOUT(1) EN = GND 5 µA
ILIM Average input current limit EN = VIN. VIN = 3.3V 1180 mA
Overtemperature protection 140 °C
Overtemperature hysteresis 20 °C
OSCILLATOR
fOSC Oscillator frequency VIN = 3.6V, VOUT = 5.0V, IOUT = 500mA 4 MHz
TIMING
Start-up time IOUT = 0mA
Time from active EN to start switching		 70 µs
IOUT = 0mA
Time from active EN to VOUT 		400 µs
(1) Maximum values can vary over lifetime due to intrinsic capacitor ageing effects. For more details, refer to Thermal and Reliability Information section.