ZHCSMA7C january   2022  – december 2022 TPS4811-Q1

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Revision History
  6. Device Comparison Table
  7. Pin Configuration and Functions
  8. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Switching Characteristics
    7. 7.7 Typical Characteristics
  9. Parameter Measurement Information
  10. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1  Charge Pump and Gate Driver output (VS, PU, PD, BST, SRC)
      2. 9.3.2  Capacitive Load Driving
        1. 9.3.2.1 FET Gate Slew Rate Control
        2. 9.3.2.2 Using Precharge FET - (with TPS48111-Q1 Only)
      3. 9.3.3  Overcurrent and Short-Circuit Protection
        1. 9.3.3.1 Overcurrent Protection With Auto-Retry
        2. 9.3.3.2 Overcurrent Protection With Latch-Off
      4. 9.3.4  Short-Circuit Protection
      5. 9.3.5  Analog Current Monitor Output (IMON)
      6. 9.3.6  Overvoltage (OV) and Undervoltage Protection (UVLO)
      7. 9.3.7  Device Functional Mode (Shutdown Mode)
      8. 9.3.8  Remote Temperature sensing and Protection (DIODE)
      9. 9.3.9  Output Reverse Polarity Protection
      10. 9.3.10 TPS4811x-Q1 as a Simple Gate Driver
  11. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application: Driving HVAC PTC Heater Load on KL40 Line in Power Distribution Unit
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Curves
    3. 10.3 Typical Application: Driving B2B FETs With Pre-charging the Output Capacitance
      1. 10.3.1 Design Requirements
      2. 10.3.2 External Component Selection
      3. 10.3.3 Application Curves
    4. 10.4 Power Supply Recommendations
    5. 10.5 Layout
      1. 10.5.1 Layout Guidelines
      2. 10.5.2 Layout Example
  12. 11Device and Documentation Support
    1. 11.1 接收文档更新通知
    2. 11.2 支持资源
    3. 11.3 Trademarks
    4. 11.4 静电放电警告
    5. 11.5 术语表
  13. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

说明

TPS4811x-Q1 系列是一款具有保护和诊断功能的 100V 智能高侧驱动器。该器件的宽工作电压范围为 3.5V 至 80V,适合 12V、24V 和 48V 系统设计。

它具有强大的 3.7A 峰值拉电流 (PU) 和 4A 峰值灌电流 (PD) 栅极驱动器,可在大电流系统设计中使用并联 FET 进行电源开关。将 INP 用作栅极驱动器控制输入。

该器件具有精确的电流检测 (±2 %) 输出 (IMON) 支持系统设计,可用于能源管理。该器件集成了具有 FLT_I 输出的两级过流保护,具有完全可调的阈值和响应时间。可以配置自动重试和锁存故障行为。该器件具有远程过热保护,具有 FLT_T 输出。

TPS48111-Q1 将预充电驱动器 (G) 与控制输入 (INP_G) 集成。此功能支持必须驱动大容性负载的设计。在关断模式下,控制器在 48V 电源输入下的总关断电流为 1.6µA。

TPS4811x-Q1 采用 19 引脚 VSSOP 封装,在相邻的高压和低压引脚之间移除了一个引脚,提供 0.8 毫米的间隙。

封装信息
器件型号封装(1)封装尺寸(标称值)
TPS48110-Q1、
TPS48111-Q1
VSSOP (19)5.10mm × 3.00mm
如需了解所有可用封装,请参阅数据表末尾的可订购产品附录。
GUID-20220111-SS0I-XHJT-5SMD-VZQX94CNNFBS-low.svg适用于加热器负载的智能高侧驱动器
GUID-20220111-SS0I-7KQX-6BT8-D9XQB0JN4GQV-low.svg用于直流/直流转换器的断路器