ZHCSIQ4B September   2018  – December 2018 OPA828

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     Device Images
      1.      开环增益和相位与频率间的关系
      2.      失调电压漂移
  4. 修订历史记录
  5. Pin Configuration and Functions
    1.     Pin Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Operating Characteristics
      2. 7.3.2  Phase-Reversal Protection
      3. 7.3.3  Electrical Overstress
      4. 7.3.4  MUX Friendly Inputs
      5. 7.3.5  Overload Power Limiter
      6. 7.3.6  Capacitive Load and Stability
      7. 7.3.7  Capacitive Load and Stability
      8. 7.3.8  Settling Time
      9. 7.3.9  Slew Rate
      10. 7.3.10 Full Power Bandwidth
      11. 7.3.11 Small Signal Response
      12. 7.3.12 Thermal Considerations
      13. 7.3.13 Thermal Shutdown
      14. 7.3.14 Low Noise
      15. 7.3.15 Low Offset Voltage Drift
      16. 7.3.16 Overload Recovery
    4. 7.4 Device Functional Modes
      1. 7.4.1 Functional Modes
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Typical Application: SAR ADC Driver
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
        3. 8.2.1.3 Application Curves
      2. 8.2.2 Typical Application: Low-Pass Filter
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Detailed Design Procedure
        3. 8.2.2.3 Application Curve
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 开发支持
    2. 11.2 文档支持
      1. 11.2.1 相关文档
    3. 11.3 接收文档更新通知
    4. 11.4 社区资源
    5. 11.5 商标
    6. 11.6 静电放电警告
    7. 11.7 术语表
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Capacitive Load and Stability

The dynamic characteristics of the OPA828 are optimized for common operating conditions. The combination of low closed-loop gain and high capacitive loads decreases the phase margin of the amplifier and can lead to gain peaking or oscillations. As a result, heavier capacitive loads must be isolated from the output. The simplest way to achieve this isolation is to add a small resistor (for example, ROUT equal to 50 Ω) in series with the output. The Figure 49 graph show small-signal overshoot versus capacitive load. See Feedback Plots Define Op Amp AC Performance for details of analysis techniques and application circuits.

OPA828 Small-Signal Overshoot vs Capacitive Load log.gif
Figure 49. Small-Signal Overshoot vs Capacitive Load