MSP432P4111T 数据表 | 德州仪器 TI.com.cn

PRODUCTION DATA.

请参考 PDF 数据表获取器件具体的封装图。

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER	ORIGINAL OPERATING MODE	FINAL OPERATING MODE	TEST CONDITIONS		TYP	MAX	UNIT
t_{AMLDO0_LPMx}⁽¹⁾	AM_LDO_VCORE0	LPM3_LPM4_VCORE0	Transition from AM_LDO_VCORE0 to LPM3 or LPM4 at VCORE0	SELM = 3. DCO frequency = 24 MHz	18	60	µs
t_{LPMx_AMLDO0_NORIO}⁽²⁾	LPM3_LPM4_VCORE0	AM_LDO_VCORE0	Transition from LPM3 or LPM4 at VCORE0 to AM_LDO_VCORE0 through wake-up event from non-glitch filter type I/O	SELM = 3. DCO frequency = 24 MHz	8	9	µs
t_{LPMx_AMLDO0_GFLTIO}⁽²⁾	LPM3_LPM4_VCORE0	AM_LDO_VCORE0	Transition from LPM3 or LPM4 at VCORE0 to AM_LDO_VCORE0 through wake-up event from glitch filter type I/O, GLTFLT_EN = 1	SELM = 3. DCO frequency = 24 MHz	9	10	µs
t_{AMLF0_LPMx_128k}⁽¹⁾	AM_LF_VCORE0	LPM3_LPM4_VCORE0	Transition from AM_LF_VCORE0 to LPM3 or LPM4 at VCORE0	SELM = 2. REFO frequency = 128 kHz	255	290	µs
t_{AMLF0_LPMx_32k}⁽¹⁾	AM_LF_VCORE0	LPM3_LPM4_VCORE0	Transition from AM_LF_VCORE0 to LPM3 or LPM4 at VCORE0	SELM = 0. LFXT frequency = 32.768 kHz	980	1025	µs
t_{LPMx_AMLF0_NORIO_128k}⁽²⁾	LPM3_LPM4_VCORE0	AM_LF_VCORE0	Transition from LPM3 or LPM4 at VCORE0 to AM_LF_VCORE0 through wake-up event from non-glitch filter type I/O	SELM = 2. REFO frequency = 128 kHz	45	55	µs
t_{LPMx_AMLF0_NORIO_32k}⁽²⁾	LPM3_LPM4_VCORE0	AM_LF_VCORE0	Transition from LPM3 or LPM4 at VCORE0 to AM_LF_VCORE0 through wake-up event from non-glitch filter type I/O	SELM = 0. LFXT frequency = 32.768 kHz	150	170	µs

(1) This is the latency from WFI instruction execution by CPU to LPM3 or LPM4 entry.

(2) This is the latency from I/O wake-up event to MCLK clock start at device pin.

Table 5-7 lists the latencies required to change to and from LPM3.5 and LPM4.5 modes.