PMP4442

汽车 I.MX6 四核处理器电源解决方案参考设计

PMP4442

设计文件

概述

The PMP4442 reference design is an low-cost discrete power solution to power I.MX6 quad core. All the DCDC regulators are running at 2MHz to avoid the AM band interference and provide low solution size. The first stage DCDC converter can support wide Vin range from 6V to 42V, which can support start-stop system as well as load dump. The second stage DCDC provides all the necessary power rails to power up I.MX6 quad core. I.MX6 is very loose on the power sequencing of the different rails so no sequencer is necessary for this design. It uses a 4 layer board with 2oz copper to have better thermal characteristic at 2MHz switching frequency and 85C ambient.

特性
  • Wide input voltage range: off battery 6V to 42V power supply to support start-stop system and load dump
  • The DCDC regulator all run at 2MHz to avoid AM band interference and very small form factor
  • No sequencer is needed since I.MX6 is very loose on the power rails sequencing
  • First stage wide Vin async DCDC converter, TPS54561-Q1, can run at 4A, 5V out at 2MHz to allow users to avoid using controller to save cost, area and avoid voltage shoot through
  • I.MX6 vcore voltage can run at 4A, it can provide the current at least 30% higher than even the highly atypical condition which is dual 1080p video playback plus one 3D graphics
  • All the power rails powering I.MX6 ripple are below 5%
  • Sink/source voltage regulator that will provide the VTT termination voltage for DDR memory
输出电压选项 PMP4442.1 PMP4442.2 PMP4442.3 PMP4442.4 PMP4442.5
Vin (Min) (V) 6 6 6 6 6
Vin (Max) (V) 42 42 42 42 42
Vout (Nom) (V) 1.5 1.425 3.3 1.8 3.33
Iout (Max) (A) 3 4 1.5 1 .15
Output Power (W) 4.5 5.7 4.95 1.8 .4995
Isolated/Non-Isolated Non-Isolated Non-Isolated Non-Isolated Non-Isolated Non-Isolated
Input Type DC DC DC DC DC
Topology Buck- Synchronous Buck- Synchronous Buck- Synchronous Buck- Synchronous Linear Regulator
??image.gallery.download_zh_CN?? 观看带字幕的视频 视频

我们开发的全面组装电路板仅用于测试和性能验证,不可用于销售。

设计文件和产品

设计文件

下载现成的系统文件,加快您的设计过程。

TIDU732.PDF (1929 K)

参考设计的测试结果,包括效率图表,测试前提条件等

TIDU733.PDF (290 K)

参考设计的测试结果,包括效率图表,测试前提条件等

TIDRCI8.PDF (100 K)

设计布局和元件的详细原理图

TIDRCI9.PDF (66 K)

设计元件、引用标识符和制造商/器件型号的完整列表

TIDC867.ZIP (715 K)

包含设计 PCB 物理板层信息的设计文件

产品

在设计中包括 TI 产品和可能的替代产品。

线性和低压降 (LDO) 稳压器

TLV700-Q1具有使能功能的汽车类、200mA、高 PSRR、低 IQ、低压降稳压器

数据表: PDF | HTML
降压转换器(集成开关)

LM26420-Q1通过汽车认证的双路 2A 高效同步直流/直流转换器

数据表: PDF | HTML
降压转换器(集成开关)

TPS54561-Q1具有软启动和 Eco-mode™ 的汽车类 4.5V 至 60V 输入 5A 直流/直流降压转换器

数据表: PDF | HTML

技术文档

star
= TI 精选文档
未找到结果。请清除搜索,并重试。
查看所有 2
类型 标题 下载最新的英文版本 日期
* 测试报告 PMP4442 Overview 2015年 1月 13日
测试报告 PMP4442 Test Results 2015年 1月 13日

支持与培训

可获得 TI E2E™ 论坛的工程师技术支持

查看所有论坛主题
查看英文版所有论坛主题

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持

视频