PMP30308
隔离型 6W DCM 反激式转换器参考设计
PMP30308
概述
This reference design converts an input voltage of 12 V to 24 V output voltage (isolated). The maximum output current is 250mA. The TPS40210 IC and primary side regulation makes this design cost efficient. A typical application may be IGBT-Driver or interface isolation (applications where a tight load regulation is not necessary). The secondary side of transformer allows 12V (windings parallel) or 24V (windings serial) output voltage.
特性
- Low cost
- Low output ripple
- No opto-isolator which may cause an aging problem
- Low thermal stress at full load
- The design was built and tested
输出电压选项 | PMP30308.1 |
---|---|
Vin (Min) (V) | 10.8 |
Vin (Max) (V) | 13.2 |
Vout (Nom) (V) | 24 |
Iout (Max) (A) | .25 |
Output Power (W) | 6 |
Isolated/Non-Isolated | Isolated |
Input Type | DC |
Topology | Flyback- DCM^Flyback- Non Sync |
我们开发的全面组装电路板仅用于测试和性能验证,不可用于销售。
设计文件和产品
设计文件
下载现成的系统文件,加快您的设计过程。
技术文档
= TI 精选文档
未找到结果。请清除搜索,并重试。
查看所有 1
类型 | 标题 | 下载最新的英文版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 测试报告 | Isolated 6-W DCM Flyback Reference Design (Rev. A) | 2018年 10月 25日 |