The Fusion Digital Power Designer supports TPS404x, TPS5x, and UCD90x devices. For UCD3x devices, please use Fusion Digital Power Studio.
Fusion Digital Power™ is the Graphical User Interface (GUI) used to configure and monitor select Texas Instruments digital power controllers and sequencer/health monitors. The application uses the PMBus protocol to communicate with the device over serial bus by way of a TI USB adapter.
Some of the tasks you can perform with the GUI include:
- Turn on or off the power supply output, either through the hardware control line or the PMBus OPERATION command
- Monitor real-time data. Items such as input voltage, output voltage, output current, temperature, and warnings/faults are continuously monitored and displayed by the GUI.
- Configure the control law accelerator (CLA) coefficients through an interactive design tool
- Configure common operating characteristics such as Vout, warning and fault thresholds, and switching frequency