PCM4201
- High-Performance Delta-Sigma Analog-to-Digital Converter
- Differential Voltage Inputs
- Dynamic Performance:
- Dynamic Range (A-Weighted): Up to 112dB
- THD+N: As low as -105dB
- Three Sampling Modes:
- Supports Output Sampling Rates Up to 108kHz
- Choose from Low Power, High-Performance, or Double Speed Modes
- Audio Serial Port Interface:
- Master or Slave Mode Operation
- 24-Bit Linear PCM Output Data
- Left-Justified/DSP-Compatible Data Format
- Digital High-Pass Filter for DC Removal:
- Includes a High-Pass Filter Disable Pin
- Power Supplies:
- Requires a +5V Analog Power Supply
- Supports a +1.8V to +3.3V Digital Power Supply Range
- Low Power Dissipation
- 49mW Typical (Low Power Mode with VDD = +3.3V)
- 39mW Typical (Low Power Mode with VDD = +1.8V)
- Power Down Mode
- Less than 50µW total power dissipation
- Available in a small TSSOP-16 Package
- APPLICATIONS
- Digital Wireless Microphones
- Battery-Powered Audio Recording and Processing Equipment
I2S is a registered trademark of Royal Philips Electronics B.V., The Netherlands.
All other trademarks are the property of their respective owners.
The PCM4201 is designed for digital audio applications that require a combination of high dynamic range, low distortion, and low power consumption. The primary applications for the PCM4201 include digital wireless microphones and battery-operated audio recording or processing equipment. The PCM4201 outputs 24-bit linear PCM audio data at sampling rates up to 108kHz. Three sampling modes allow the user to trade off power for performance, dependent upon the intended system requirements. An on-chip voltage reference reduces the number of external components needed for operation.
The PCM4201 includes dedicated control pins for configuration of all programmable functions. The device requires a +5.0V analog power supply, in addition to a digital supply operating from +1.8V to +3.3V. The PCM4201 is available in a small TSSOP-16 package.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | Low Power, 24-Bit, Single Channel Audio Analog-to-Digital Converter 数据表 (Rev. B) | 2006年 4月 12日 | |||
应用手册 | 所选封装材料的热学和电学性质 | 2008年 10月 16日 | ||||
EVM 用户指南 | PCM4201EVM - User Guide (Rev. A) | 2005年 2月 3日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PCM4201EVM — PCM4201 评估模块 (EVM)
The PCM4201EVM provides a convenient platform for evaluating the performance and functionality of the single channel PCM4201 audio device. The EVM has a differential analog input channel. This channel is buffered and filtered using a low noise input circuit, a Texas Instruments OPA2134 dual (...)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
TSSOP (PW) | 16 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。