MSP430F2618-EP 增强型产品 16 位超低功耗 MCU,具有 92KB 闪存、8KB RAM、12 位 ADC、双 DAC、2 个 USCI | 德州仪器 TI.com.cn

MSP430F2618-EP (正在供货)

增强型产品 16 位超低功耗 MCU,具有 92KB 闪存、8KB RAM、12 位 ADC、双 DAC、2 个 USCI

增强型产品 16 位超低功耗 MCU,具有 92KB 闪存、8KB RAM、12 位 ADC、双 DAC、2 个 USCI - MSP430F2618-EP
数据表 勘误表
 

描述

The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portablemeasurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430F2618 is a microcontroller configuration with two built-in 16-bit timers, a fast 12-bit A/D converter, a comparator, dual 12-bit D/A converters, four universal serial communication interface (USCI) modules, DMA, and up to 64 I/O pins. Typical applications include sensor systems, industrial control applications, hand-held meters, etc.

特性

  • Low Supply Voltage Range, 1.8 V to 3.6 V
  • Ultra-Low Power Consumption:
    • Active Mode: 365 µA at 1 MHz, 2.2 V
    • Standby Mode (VLO): 0.5 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Wake-Up From Standby Mode in Less Than 1 µs
  • 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
  • Three-Channel Internal DMA
  • 12-Bit Analog-to-Digital (A/D) Converter With Internal Reference,
    Sample-and-Hold, and Autoscan Feature
  • Dual 12-Bit Digital-to-Analog (D/A) Converters With Synchronization
  • 16-Bit Timer_A With Three Capture/Compare Registers
  • 16-Bit Timer_B With Seven Capture/Compare-With-Shadow Registers
  • On-Chip Comparator
  • Four Universal Serial Communication Interfaces (USCIs)
    • USCI_A0 and USCI_A1
      • Enhanced UART Supporting Auto-Baudrate Detection
      • IrDA Encoder and Decoder
      • Synchronous SPI
    • USCI_B0 and USCI_B1
      • I2C™
      • Synchronous SPI
  • Supply Voltage Supervisor/Monitor With Programmable Level Detection
  • Brownout Detector
  • Bootstrap Loader
  • Serial Onboard Programming, No External Programming Voltage Needed
    Programmable Code Protection by Security Fuse
  • 116KB+256B Flash Memory, 8KB RAM
  • Available in 113-Pin Ball Grid Array (BGA)
  • For Complete Module Descriptions, See the MSP430x2xx Family User’s Guide, Literature Number SLAU144
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability
    • SnPb Solder Ball Alloy for Increased Reliability

I2C is a registered trademark of Philips Incorporated.

查看更多内容

参数 与其它产品相比 MSP430 MCU

 
CPU
Frequency (MHz)
Non-volatile Memory (KB)
RAM (KB)
GPIO
I2C
SPI
UART
DMA
ADC
Comparators (#)
Timers - 16-bit
Timers - 32-bit
Multiplier
AES
Bootloader (BSL)
VCC (Min) (V)
Active Power (uA/MHz)
VCC (Max) (V)
Standby Power (LPM3-uA)
Wakeup Time (us)
Features
Special I/O
Operating Temperature Range (C)
Package Group
Package Size: mm2:W x L (PKG)
Rating
MSP430F2618-EP
MSP430    
16    
116    
8    
48    
2    
2    
2    
3    
12-bit SAR    
Yes    
2    
0    
16x16    
N/A    
UART    
1.8    
365    
3.6    
0.5    
1    
DAC    
N/A    
-40 to 105    
BGA MICROSTAR JUNIOR    
113BGA MICROSTAR JUNIOR: 49 mm2: 7 x 7(BGA MICROSTAR JUNIOR)    
HiRel Enhanced Product    

其它合格版本 MSP430F2618-EP

版本 器件型号 定义
目录 MSP430F2618 TI 的标准目录产品